An opensource OpenWrt variant for mainland China users.

Go to file

Nick Hainke 208c69a51b kernel: enable SRv6 support by enabling lwtunnel Enable the ability to use segment routing based on IPv6. It allows the packet to specify a path that the packet should take through the network. Lwtunnel allow an easy encapsulation of a package. You can just install ip-full package and use it: ip -6 route add 2003::/64 dev eth0 encap seg6 mode encap \ segs 2001::1,2002::2 An IPv6 package looks like this: [IPv6 HDR][IPv6 RH][IPv6 HDR][Data...] Netifd support: https://git.openwrt.org/?p=project/netifd.git; a=commit;h=458b1a7e9473c150a40cae5d8be174f4bb03bd39 Increases imagesize by 24.125 KiB. Therefore, only enable for devices with enough flash. Signed-off-by: Nick Hainke <vincent@systemli.org>		2021-01-13 12:25:36 +08:00
config	kernel: enable SRv6 support by enabling lwtunnel	2021-01-13 12:25:36 +08:00
include	kernel-defaults: Manage the enabling/disabling of ZSTD	2021-01-10 21:30:05 +08:00
package	Merge Mainline	2021-01-11 20:58:17 +08:00
scripts	Merge Mainline	2021-01-07 10:00:33 +08:00
target	kernel: enable SRv6 support by enabling lwtunnel	2021-01-13 12:25:36 +08:00
toolchain	Merge Mainline	2021-01-10 21:36:13 +08:00
tools	Merge Mainline	2021-01-11 20:58:17 +08:00
.gitattributes	fix permisson	2019-08-16 15:09:42 +08:00
.gitignore	build: improve ccache support	2021-01-02 12:08:17 +08:00
BSDmakefile	packages: apply usign padding workarounds to package indexes if needed	2019-08-16 14:48:02 +08:00
Config.in	packages: apply usign padding workarounds to package indexes if needed	2019-08-16 14:48:02 +08:00
CONTRIBUTED.md	Merge Mainline	2020-12-25 19:25:12 +08:00
feeds.conf.default	feeds: switch to github official repo	2020-06-20 12:06:05 +08:00
LICENSE	packages: apply usign padding workarounds to package indexes if needed	2019-08-16 14:48:02 +08:00
Makefile	build: use ccache -C for cleaning the cache	2021-01-07 09:57:24 +08:00
README.md	README: rename branch to openwrt-18.06-k5.4	2020-08-08 13:53:33 +08:00
rules.mk	build: improve ccache support	2021-01-02 12:08:17 +08:00

README.md

PROJECT OPENWRT

The Source Code of OpenWrt-Lean Modified by CTCGFW

Welcome to our Telegram Group: @ctcgfw_openwrt_discuss.

How to make it

Minimum requirements

Linux with case sensitive
2G DDR2 RAM
2 CPU Cores (AMD64, 1.4Ghz)
25G disk space left
Has access to both ChinaNet & Internet

Install the necessary packages (for Ubuntu user)

sudo apt-get update -y
sudo apt-get full-upgrade -y
sudo apt-get install -y build-essential asciidoc binutils bzip2 gawk gettext git libncurses5-dev libz-dev patch unzip zlib1g-dev lib32gcc1 libc6-dev-i386 subversion flex uglifyjs git-core gcc-multilib g++-multilib p7zip p7zip-full msmtp libssl-dev texinfo libreadline-dev libglib2.0-dev xmlto qemu-utils upx libelf-dev autoconf automake libtool autopoint ccache curl wget vim nano python python3 python-pip python3-pip python-ply python3-ply haveged lrzsz device-tree-compiler scons antlr3 gperf intltool rsync

For mainland China & Ubuntu(16.04+) user, you may run the following command to setup quickly:

sudo bash -c "bash <(curl -s https://build-scripts.project-openwrt.eu.org/init_build_environment.sh)"

Clone the source

git clone -b openwrt-18.06-k5.4 --single-branch https://github.com/project-openwrt/openwrt && cd openwrt
./scripts/feeds update -a && ./scripts/feeds install -a

Configure your firmware

make menuconfig

Make it

make -j1 V=s

Tips

You'd better not use root to make it, or you may be not able to use.
Default login address: 192.168.1.1, username is root and password is password.