John Crispin aecac14cc4 ramips: Enable rx of 1536 bytes ethernet frames on MT7621 ... The default switch frame size (with FCS + header) is 1536 bytes. But the GMAC only accepted frames up to 1522 bytes. Setting it to 1536 allows to receive ethernet frames using the full of MTU 1500 + an extra VLAN header + VLAN header added by the switch. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 47117		2015-10-05 10:26:34 +00:00
..
esw_rt3052.c	ralink: use fe_reset to control all reset	2015-01-18 20:17:07 +00:00
esw_rt3052.h
gsw_mt7620a.c	ramips: Enable rx of 1536 bytes ethernet frames on MT7621	2015-10-05 10:26:34 +00:00
gsw_mt7620a.h	ralink: add support for mt7621 ethernet	2014-11-12 14:54:50 +00:00
Kconfig	ralink: add support for mt7621 ethernet	2014-11-12 14:54:50 +00:00
Makefile
mdio_rt2880.c
mdio_rt2880.h
mdio.c
mdio.h
mt7530.c	ramips: Allow to receive vlan over untag ports on MT7530	2015-10-05 10:26:09 +00:00
mt7530.h
ralink_ethtool.c	ramips: collect rx related members to fe_rx_ring struct	2015-07-10 19:41:48 +00:00
ralink_ethtool.h
ralink_soc_eth.c	ramips: Fix too small rx buffer	2015-10-05 10:26:28 +00:00
ralink_soc_eth.h	ramips: Fix setting of rx buffer length	2015-10-05 10:26:21 +00:00
soc_mt7620.c	ramips: make ethernet register map u16 instead of u32	2015-03-22 15:11:14 +00:00
soc_rt305x.c	ramips: make ethernet register map u16 instead of u32	2015-03-22 15:11:14 +00:00
soc_rt2880.c	ralink: use random generate mac address instead of default one.	2015-03-13 08:38:01 +00:00
soc_rt3883.c	ralink: use random generate mac address instead of default one.	2015-03-13 08:38:01 +00:00