2902b0a6fb
This commit adds support for the FriendlyElec NanoPi R3S. CPU: Rockchip RK3566, Quad-core Cortex-A55 RAM: 2GB LPDDR4X Ethernet: GMAC RTL8211F GbE, PCIe R8111H GbE USB3.0 Host: Type-A x1 Storage: MicroSD Slot x 1, and optional on-board 32GB eMMC Debug Serial Port: 3.3V TTL, 3-pin 2.54mm pitch connector, 1500000 bauds LED: LED x 3 RTC: One low-power RTC, supports backup battery input Both GbE controllers are working (WAN eth0, LAN eth1). Appropriate LAN/WAN interface assignments and MAC address generation. All three LEDs are working. USB appears to be working and has been tested with mass storage. Installation - microSD: -Uncompress the OpenWRT sysupgrade.img.gz -Write image to microSD card using dd or similar tool Installation - eMMC: -Boot from microSD -Uncompress the OpenWRT sysupgrade.img.gz -Flash to eMMC : dd if=x.img of=/dev/mmcblk0 -sync -Remove microSD card -Reboot Signed-off-by: Kevin Zhang <kevin@kevinzhang.me> Link: https://github.com/openwrt/openwrt/pull/16738 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> |
||
|---|---|---|
| .. | ||
| imagebuilder | ||
| linux | ||
| llvm-bpf | ||
| sdk | ||
| toolchain | ||
| Config.in | ||
| Makefile | ||