Shiji Yang f547fc9d57 ramips: reset mt7620 ethernet phy via reset controller ... Use reset controller to reset mt7620 ethernet phy instead of directly writing system control registers. The reset line of "ephy" is 24, so the DTS resets properties have been updated to get the correct reset signal. Tested on HiWiFi HC5861. Signed-off-by: Shiji Yang <yangshiji66@qq.com>		2024-01-06 14:24:13 +01:00
..
esw_rt3050.c	raimps: mtk_eth_soc: drop rst_esw from ESW driver	2024-01-02 22:00:20 +01:00
esw_rt3050.h
ethtool.c	treewide: use ethtool_puts instead of memcpy	2024-01-05 16:12:49 +01:00
ethtool.h
gsw_mt7620.c	ramips: reset mt7620 ethernet phy via reset controller	2024-01-06 14:24:13 +01:00
gsw_mt7620.h	ramips: reset mt7620 ethernet phy via reset controller	2024-01-06 14:24:13 +01:00
Kconfig
Makefile
mdio_mt7620.c
mdio_rt2880.c	kernel: remove obsolete kernel version switches	2023-05-20 15:19:14 +02:00
mdio_rt2880.h
mdio.c	ramips: do not print error log when mdio bus is disabled	2023-06-25 18:48:29 +02:00
mdio.h
mt7530.c
mt7530.h
mtk_eth_soc.c	ramips: reset mt7620 ethernet phy via reset controller	2024-01-06 14:24:13 +01:00
mtk_eth_soc.h	ramips: reset mt7620 ethernet phy via reset controller	2024-01-06 14:24:13 +01:00
soc_mt7620.c	ramips: reset mt7620 frame engine via reset controller	2024-01-06 14:24:13 +01:00
soc_rt2880.c
soc_rt3050.c
soc_rt3883.c