Specifications: * SoC: MT7621AT * RAM: 128MB * Flash: 16MB NOR SPI flash * WiFi: MT7615N (2.4GHz) and MT7615N (5Ghz) * LAN: 5x1000M * Firmware layout is Uboot with extra 96 bytes in header * Base PCB is AP-MTKH7-0002 * LEDs Power Green,Power Orange,Internet Green,Internet Orange * LEDs "2.4G" Green & "5G" Green connected directly to wifi module * Buttons Reset,WPS,WIFI Flash instruction: Upload image via emergency recovery mode via Windows "not working with Linux" Push and hold reset button (on the bottom of the device) until power led starts flashing (about 10 secs or so) while plugging in the power cable. Give it ~30 seconds, to boot the recovery mode GUI Connect your client computer to LAN1 of the device Set your client IP address manually to 192.168.0.2 / 255.255.255.0. Call the recovery page for the device at http://192.168.0.1 Use the provided emergency web GUI to upload and flash a new firmware to the device MAC addresses: lan factory 0xe000 *:55 (label) wan factory 0xe006 *:58 2.4 GHz factory 0x0004 *:56 5.0 GHz factory 0x8004 *:57 Signed-off-by: Alan Luck <luckyhome2008@gmail.com> |
||
|---|---|---|
| .. | ||
| arch/mips/fw/myloader | ||
| Documentation/networking | ||
| drivers | ||
| include | ||