An opensource OpenWrt variant for mainland China users.

Go to file

Daniel Golle 33791fdd82 uboot-mediatek: several fixes for MT7622 * ! Behavior change ! Old behavior: If the Reset button is held down during power-on do factory reset and try booting recovery from TFTP forever. If valid recovery is received via TFTP, write it to flash and boot. New behavior: If the Reset button is held down during power-on do factory reset, then try TFTP once, then try booting on-flash recovery, then keep trying via TFTP forever until a valid image is received. Only if there is no bootable recovery stored on flash, store the downloaded recovery. Then boot it. * Set loadaddr to 0x48000000 in order to allow booting images larger than ~47MB (reported by Oskari Lemmelä). Setting loadaddr to 0x48000000 gives us 384MB on devices with 512MB RAM, which should be more than enough as a maximum size for uImage.FIT to be loaded. * Widely unify device-specific default environment in preparation to auto-generate it from parameters. * backport upstream commit fixing MBR/DOS partitioning Signed-off-by: Daniel Golle <daniel@makrotopia.org>		2021-07-12 12:05:40 +08:00
config	Merge Mainline	2021-06-26 16:49:16 +08:00
include	kernel: bump 5.4 to 5.4.128	2021-06-26 23:46:31 +08:00
LICENSES	LICENSE: sync with upstream	2021-02-16 14:19:09 +08:00
package	uboot-mediatek: several fixes for MT7622	2021-07-12 12:05:40 +08:00
scripts	Merge Mainline	2021-06-21 20:49:40 +08:00
target	ath79: add support for TP-Link RE455 v1	2021-07-12 12:05:08 +08:00
toolchain	Merge Mainline	2021-06-28 02:30:23 +08:00
tools	ath79: add support for TP-Link RE455 v1	2021-07-12 12:05:08 +08:00
.gitattributes	fix permisson	2019-08-16 15:09:42 +08:00
.gitignore	build: improve ccache support	2021-01-02 12:08:17 +08:00
BSDmakefile	build: use SPDX license tags	2021-02-06 12:07:10 +08:00
Config.in	build: use SPDX license tags	2021-02-06 12:07:10 +08:00
CONTRIBUTED.md	Merge Mainline	2021-04-17 00:17:46 +08:00
COPYING	LICENSE: sync with upstream	2021-02-16 14:19:09 +08:00
feeds.conf.default	Merge Mainline	2021-06-15 23:45:52 +08:00
Makefile	Revert "build: replace which with Bash command built-in"	2021-03-04 12:10:58 +08:00
README.md	Merge Mainline	2021-02-16 14:50:17 +08:00
rules.mk	build: add ninja build tool and make it available for cmake	2021-06-13 11:59:14 +08:00

README.md

PROJECT IMMORTALWRT

The Core Source Code of ImmortalWrt

Welcome to our Telegram Group: @ctcgfw_openwrt_discuss.

How to make it

Minimum requirements

Linux with case sensitive
2G DDR2 RAM
2 CPU Cores (AMD64, 1.4Ghz)
25G disk space left
Has access to both ChinaNet & Internet

Install the necessary packages (for Ubuntu user)

sudo apt-get update -y
sudo apt-get full-upgrade -y
sudo apt-get install -y build-essential asciidoc binutils bzip2 gawk gettext git libncurses5-dev libz-dev patch unzip zlib1g-dev lib32gcc1 libc6-dev-i386 subversion flex uglifyjs git-core gcc-multilib g++-multilib p7zip p7zip-full msmtp libssl-dev texinfo libreadline-dev libglib2.0-dev xmlto qemu-utils upx libelf-dev autoconf automake libtool autopoint ccache curl wget vim nano python python3 python-pip python3-pip python-ply python3-ply haveged lrzsz device-tree-compiler scons antlr3 gperf intltool rsync

For mainland China & Ubuntu(16.04+) user, you may run the following command to setup quickly:

sudo bash -c "bash <(curl -s https://build-scripts.project-openwrt.eu.org/init_build_environment.sh)"

Clone the source

git clone -b openwrt-18.06-k5.4 --single-branch https://github.com/immortalwrt/immortalwrt && cd immortalwrt
./scripts/feeds update -a && ./scripts/feeds install -a

Configure your firmware

make menuconfig

Make it

make -j$(nproc) V=s

Tips

You'd better not use root to make it, or you may be not able to use.
Default login address: 192.168.1.1, username is root and password is password.