An opensource OpenWrt variant for mainland China users.

Go to file

Roger Pueyo Centelles 34221e8fb9 ath79: mikrotik: enable SFP on RB922UAGS-5HPaCD This patch enables the SFP cage on the MikroTik RouterBOARD 922UAGS-5HPacD. GPIO16 (tx-disable-gpios) should be governed by the SFP driver to enable or disable transmission, but no change is observed. Therefore, it is left as output high to ensure the SFP module is forced to transmit. Tested on a RouterBOARD 922UAGS-5HPacD board, with a CISCO GLC-LH-SMD 1310nm module and an unbranded GLC-T RJ45 Gigabit module. PC=>router iperf3 tests deliver 440/300 Mbps up/down, both via regular eth0 port or SFP port with RJ45 module. Bridge between eth0 and eth1 delivers 950 Mbps symmetric. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>		2021-04-17 00:09:06 +08:00
config	treewide: fix spelling 'seperate' -> 'separate'	2021-03-02 22:26:41 +08:00
include	kernel: bump 5.10 to 5.10.28	2021-04-11 23:27:18 +08:00
LICENSES	LICENSE: sync with upstream	2021-02-16 14:19:09 +08:00
package	uboot-sunxi: update ATF dependencies for h5 devices	2021-04-16 12:27:40 +08:00
scripts	Merge Mainline	2021-03-29 18:08:36 +08:00
target	ath79: mikrotik: enable SFP on RB922UAGS-5HPaCD	2021-04-17 00:09:06 +08:00
toolchain	Merge Mainline	2021-04-12 20:23:17 +08:00
tools	firmware-utils: tplink-safeloader: support displaying fw info	2021-04-14 23:13:33 +08:00
.gitattributes	fix permisson	2019-08-16 15:09:42 +08:00
.gitignore	build: improve ccache support	2021-01-02 12:08:17 +08:00
BSDmakefile	build: use SPDX license tags	2021-02-06 12:07:10 +08:00
Config.in	build: use SPDX license tags	2021-02-06 12:07:10 +08:00
CONTRIBUTED.md	Merge Mainline	2021-03-23 09:29:58 +08:00
COPYING	LICENSE: sync with upstream	2021-02-16 14:19:09 +08:00
feeds.conf.default	Project ImmortalWrt: update feed urls	2021-02-06 16:53:05 +08:00
Makefile	Revert "build: replace which with Bash command built-in"	2021-03-04 12:10:58 +08:00
README.md	Merge Mainline	2021-02-16 14:50:17 +08:00
rules.mk	build: make sure asm gets built with -DPIC	2021-03-25 23:38:37 +08:00

README.md

PROJECT IMMORTALWRT

The Core Source Code of ImmortalWrt

Welcome to our Telegram Group: @ctcgfw_openwrt_discuss.

How to make it

Minimum requirements

Linux with case sensitive
2G DDR2 RAM
2 CPU Cores (AMD64, 1.4Ghz)
25G disk space left
Has access to both ChinaNet & Internet

Install the necessary packages (for Ubuntu user)

sudo apt-get update -y
sudo apt-get full-upgrade -y
sudo apt-get install -y build-essential asciidoc binutils bzip2 gawk gettext git libncurses5-dev libz-dev patch unzip zlib1g-dev lib32gcc1 libc6-dev-i386 subversion flex uglifyjs git-core gcc-multilib g++-multilib p7zip p7zip-full msmtp libssl-dev texinfo libreadline-dev libglib2.0-dev xmlto qemu-utils upx libelf-dev autoconf automake libtool autopoint ccache curl wget vim nano python python3 python-pip python3-pip python-ply python3-ply haveged lrzsz device-tree-compiler scons antlr3 gperf intltool rsync

For mainland China & Ubuntu(16.04+) user, you may run the following command to setup quickly:

sudo bash -c "bash <(curl -s https://build-scripts.project-openwrt.eu.org/init_build_environment.sh)"

Clone the source

git clone -b openwrt-18.06-k5.4 --single-branch https://github.com/immortalwrt/immortalwrt && cd immortalwrt
./scripts/feeds update -a && ./scripts/feeds install -a

Configure your firmware

make menuconfig

Make it

make -j$(nproc) V=s

Tips

You'd better not use root to make it, or you may be not able to use.
Default login address: 192.168.1.1, username is root and password is password.