Tobias Welz 3a8faed93d ramips: enable flashing WizFi630S via OEM firmware ... WIZnet WizFi630s board name is written slightly different it its OEM OpenWrt firmware. This causes an incompatibility warning during flashing with sysupgrade. This patch is adding the vendor board name to the supported devices list to avoid this warning. For initial flashing you can use sysupgrade via command line or luci beside of TFTP. Do not keep the OEM configuration during sysupgrade. Signed-off-by: Tobias Welz <tw@wiznet.eu>		2020-08-07 17:54:11 +08:00
..
lzma-loader	target: sync with OpenWrt 19.07-rc2	2019-12-07 20:13:33 -08:00
common-tp-link.mk	treewide: omit IMAGE_SIZE argument from check-size	2020-07-30 23:44:37 +08:00
Makefile	treewide: omit IMAGE_SIZE argument from check-size	2020-07-30 23:44:37 +08:00
mt76x8.mk	ramips: enable flashing WizFi630S via OEM firmware	2020-08-07 17:54:11 +08:00
mt7620.mk	treewide: omit IMAGE_SIZE argument from check-size	2020-07-30 23:44:37 +08:00
mt7621.mk	treewide: omit IMAGE_SIZE argument from check-size	2020-07-30 23:44:37 +08:00
rt288x.mk	treewide: omit IMAGE_SIZE argument from check-size	2020-07-30 23:44:37 +08:00
rt305x.mk	ramips: add kmod-usb-dwc2 to ZyXEL Keenetic image	2020-08-03 00:16:15 +08:00
rt3883.mk	treewide: omit IMAGE_SIZE argument from check-size	2020-07-30 23:44:37 +08:00