An opensource OpenWrt variant for mainland China users.

Go to file

BERENYI Balazs 45e3ff8395 kirkwood: Add support for Sheevaplug Globalscale SheevaPlug: * Marvell Kirkwood 88F6281 * 512 MB SDRAM * 512 MB Flash * Gigabit Network * USB 2.0 * SD slot * Serial console The device is supported in mainline uboot/linux the commit adds only some openwrt config for building an image. Installation: 1 - Update uboot: setenv ipaddr '192.168.0.111' setenv serverip '192.168.0.1' tftpboot u-boot.kwb nand erase 0x0 0x100000 nand write 0x800000 0x0 0x100000 reset 2 - Install OpenWRT: setenv ethaddr 00:50:43:01:xx:xx saveenv setenv ipaddr '192.168.0.111' setenv serverip '192.168.0.1' tftpboot openwrt-kirkwood-globalscale_sheevaplug-squashfs-factory.bin nand erase.part ubi nand write 0x800000 ubi 0x600000 reset Signed-off-by: BERENYI Balazs <balazs@wee.hu> Reviewed-by: Pawel Dembicki <paweldembicki@gmail.com> [add vendor name for uboot-kirkwood, merge patches, copy to 5.10, add AUTORELEASE for uboot-kirkwood, refresh patches] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>		2021-06-07 23:25:04 +08:00
config	config: enable KERNEL_MIPS_FP_SUPPORT for mips by default	2021-05-31 19:23:42 +08:00
include	kernel: bump 5.4 to 5.4.124	2021-06-06 23:39:33 +08:00
LICENSES	LICENSE: sync with upstream	2021-02-16 14:19:09 +08:00
package	kirkwood: Add support for Sheevaplug	2021-06-07 23:25:04 +08:00
scripts	Merge Mainline	2021-05-31 18:55:44 +08:00
target	kirkwood: Add support for Sheevaplug	2021-06-07 23:25:04 +08:00
toolchain	Merge Mainline	2021-05-31 18:55:44 +08:00
tools	ath79: use dynamic partitioning for TP-Link CPE series	2021-06-06 23:35:12 +08:00
.gitattributes	fix permisson	2019-08-16 15:09:42 +08:00
.gitignore	build: improve ccache support	2021-01-02 12:08:17 +08:00
BSDmakefile	build: use SPDX license tags	2021-02-06 12:07:10 +08:00
Config.in	build: use SPDX license tags	2021-02-06 12:07:10 +08:00
CONTRIBUTED.md	Merge Mainline	2021-04-17 00:17:46 +08:00
COPYING	LICENSE: sync with upstream	2021-02-16 14:19:09 +08:00
feeds.conf.default	Project ImmortalWrt: update feed urls	2021-02-06 16:53:05 +08:00
Makefile	Revert "build: replace which with Bash command built-in"	2021-03-04 12:10:58 +08:00
README.md	Merge Mainline	2021-02-16 14:50:17 +08:00
rules.mk	build: introduce $(MKHASH)	2021-05-13 22:49:42 +08:00

README.md

PROJECT IMMORTALWRT

The Core Source Code of ImmortalWrt

Welcome to our Telegram Group: @ctcgfw_openwrt_discuss.

How to make it

Minimum requirements

Linux with case sensitive
2G DDR2 RAM
2 CPU Cores (AMD64, 1.4Ghz)
25G disk space left
Has access to both ChinaNet & Internet

Install the necessary packages (for Ubuntu user)

sudo apt-get update -y
sudo apt-get full-upgrade -y
sudo apt-get install -y build-essential asciidoc binutils bzip2 gawk gettext git libncurses5-dev libz-dev patch unzip zlib1g-dev lib32gcc1 libc6-dev-i386 subversion flex uglifyjs git-core gcc-multilib g++-multilib p7zip p7zip-full msmtp libssl-dev texinfo libreadline-dev libglib2.0-dev xmlto qemu-utils upx libelf-dev autoconf automake libtool autopoint ccache curl wget vim nano python python3 python-pip python3-pip python-ply python3-ply haveged lrzsz device-tree-compiler scons antlr3 gperf intltool rsync

For mainland China & Ubuntu(16.04+) user, you may run the following command to setup quickly:

sudo bash -c "bash <(curl -s https://build-scripts.project-openwrt.eu.org/init_build_environment.sh)"

Clone the source

git clone -b openwrt-18.06-k5.4 --single-branch https://github.com/immortalwrt/immortalwrt && cd immortalwrt
./scripts/feeds update -a && ./scripts/feeds install -a

Configure your firmware

make menuconfig

Make it

make -j$(nproc) V=s

Tips

You'd better not use root to make it, or you may be not able to use.
Default login address: 192.168.1.1, username is root and password is password.