3843c641d8
2-Bay NAS - maximum two 3.5" Harddisks Hardware: - SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz - Ram: 512MB (4x Nanya NT5TU128M8GE-AC) - NAND Flash: 256MB (Samsung 216 K9F2G08U0C) - Lan: 1x GBE (Marvell 88E1116R-NNC1) - Storage: 2x SATA HDD 3.5" Slot - USB: 2x USB 2.0 port - Console: Internal J3 connector (1: Vcc, 2: Rx, 3: Tx, 4: GND) - LEDs: 13x GPIO controlled - Buttons: 2x GPIO controlled Known issues: - Buzzer is unused due lack of proper driver Installation: - Apply factory initramfs image via stock web-gui. - Do sysupgrade to make installation complete. Back to stock: - OpenWrt rootfs partition use unused space after stock firmware. - Full revert is possible. - Login via ssh and run: ctera_c200-v1_back_to_factory Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by: Sungbo Eo <mans0n@gorani.run> [apply sorting to device recipe] Signed-off-by: Sungbo Eo <mans0n@gorani.run>
35 lines
603 B
Bash
35 lines
603 B
Bash
RAMFS_COPY_BIN='fw_printenv fw_setenv strings'
|
|
RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
|
|
|
|
REQUIRE_IMAGE_METADATA=1
|
|
|
|
platform_check_image() {
|
|
return 0
|
|
}
|
|
|
|
platform_do_upgrade() {
|
|
local board="$(board_name)"
|
|
|
|
case "$board" in
|
|
ctera,c200-v1)
|
|
part=$(find_mtd_part "active_bank")
|
|
|
|
if [ -n "$part" ]; then
|
|
CI_KERNPART="$(strings $part | grep bank)"
|
|
nand_do_upgrade "$1"
|
|
else
|
|
echo "active_bank partition missed!"
|
|
return 1
|
|
fi
|
|
;;
|
|
linksys,e4200-v2|\
|
|
linksys,ea3500|\
|
|
linksys,ea4500)
|
|
platform_do_upgrade_linksys "$1"
|
|
;;
|
|
*)
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
esac
|
|
}
|