An opensource OpenWrt variant for mainland China users.

Go to file

Shiji Yang 5a898a507a ramips: add support for Motorola MWR03 Specifications: * SOC: MT7628AN + MT7612E * ROM: 8 MiB Flash * RAM: 64 MiB DDR2 * WAN: 10/100M 1 LAN: 10/100M 3 Button: Reset 1 LEDs: orange 1, white 1 * Antennas: 2.4 GHz 2 + 5 GHz 2 * TTL Baudrate: 57600 * TFTP Upgrade: IP: 192.168.51.1, Server: 192.168.51.100 MAC addresses as verified by OEM firmware: use address source 2g :d8 factory 0x0004 (label) 5g :d9 factory 0x8004 LAN :d7 factory $label -1 WAN :da factory $label +2 Installation (TFTP + U-Boot): * Connect device with a TTL cable and open a serial session by PuTTY. * Press "2" when booting to select "Load system code then write to Flash via TFTP". * Configure the IP of local host server. * Upload firmware by tftpd64, it will boot when write instruction is executed. Signed-off-by: Shiji Yang <yangshiji66@qq.com> [fix DTS line endings, fix label MAC address, adjust status LED names, convert mtd-mac-address-increment to mac-address-increment] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>		2021-08-25 12:08:14 +08:00
config	Merge Mainline	2021-06-26 16:49:16 +08:00
include	kernel: bump 5.4 to 5.4.142	2021-08-22 12:12:55 +08:00
LICENSES	LICENSE: sync with upstream	2021-02-16 14:19:09 +08:00
package	netifd: update to the latest version	2021-08-25 12:07:13 +08:00
scripts	base-files: add generic sdcard upgrade method	2021-08-07 12:09:16 +08:00
target	ramips: add support for Motorola MWR03	2021-08-25 12:08:14 +08:00
toolchain	Merge Mainline	2021-08-10 19:34:07 +08:00
tools	firmware-utils: fix build on not Linux	2021-08-22 12:17:16 +08:00
.gitattributes	fix permisson	2019-08-16 15:09:42 +08:00
.gitignore	.gitignore: ignore any .vscode* file	2021-07-03 17:25:40 +08:00
BSDmakefile	build: use SPDX license tags	2021-02-06 12:07:10 +08:00
Config.in	build: use SPDX license tags	2021-02-06 12:07:10 +08:00
CONTRIBUTED.md	Merge Mainline	2021-07-14 14:53:12 +08:00
COPYING	LICENSE: sync with upstream	2021-02-16 14:19:09 +08:00
feeds.conf.default	Merge Mainline	2021-06-15 23:45:52 +08:00
Makefile	Revert "build: replace which with Bash command built-in"	2021-03-04 12:10:58 +08:00
README.md	Merge Mainline	2021-07-14 14:53:12 +08:00
rules.mk	build: add ninja build tool and make it available for cmake	2021-06-13 11:59:14 +08:00

README.md

PROJECT IMMORTALWRT

The Core Source Code of ImmortalWrt

Welcome to our Telegram Group: @ctcgfw_openwrt_discuss.

How to make it

Minimum requirements

Linux with case sensitive
2G DDR2 RAM
2 CPU Cores (AMD64, 1.4Ghz)
25G disk space left
Has access to both ChinaNet & Internet

Install the necessary packages (for Ubuntu user)

sudo apt-get update -y
sudo apt-get full-upgrade -y
sudo apt-get install -y build-essential cmake asciidoc binutils bzip2 gawk gettext git libncurses5-dev libz-dev patch unzip zlib1g-dev lib32gcc1 libc6-dev-i386 subversion flex uglifyjs git-core gcc-multilib g++-multilib p7zip p7zip-full msmtp libssl-dev texinfo libreadline-dev libglib2.0-dev xmlto qemu-utils upx libelf-dev autoconf automake libtool autopoint ccache curl wget vim nano python2.7 python3 python3-pip python3-ply haveged lrzsz device-tree-compiler scons antlr3 gperf intltool mkisofs rsync

For mainland China & Ubuntu(16.04+) user, you may run the following command to setup quickly:

sudo bash -c "bash <(curl -s https://build-scripts.project-openwrt.eu.org/init_build_environment.sh)"

Clone the source

git clone -b openwrt-18.06-k5.4 --single-branch https://github.com/immortalwrt/immortalwrt && cd immortalwrt
./scripts/feeds update -a && ./scripts/feeds install -a

Configure your firmware

make menuconfig

Make it

make -j$(nproc) V=s

Tips

You'd better not use root to make it, or you may be not able to use.
Default login address: 192.168.1.1, username is root and password is password.