fish/immortalwrt
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
5c11258297
immortalwrt/target/linux/ramips
History
INAGAKI Hiroshi 5c11258297 ramips: add support for I-O DATA WN-AC733GR3 
I-O DATA WN-AC733GR3 is a 2.4/5 GHz band 11ac router, based on
MediaTek MT7620A.

Specification

- SoC		: MediaTek MT7620A
- RAM		: DDR2 64 MiB
- Flash		: SPI-NOR 8 MiB
- WLAN		: 2.4/5 GHz
  - 2.4 GHz : MT7620A (SoC), 2T2R
  - 5 GHz   : MT7610E, 1T1R
- Ethernet	: 10/100/1000 Mbps (RTL8367RB)
- LED/key	: 4x/4x (2x buttons, 1x slide-switch)
- UART		: through-hole on PCB
  - J1: Vcc, RX, GND, TX from LED side
  - 57600n8

Flash instruction using factory image:

1. Boot WN-AC733GR3 normaly
2. Access to "http://192.168.0.1/" and open firmware update page
("ファームウェア")
3. Select the OpenWrt factory image and click update ("更新") button
to perform firmware update
4. Wait ~150 seconds to complete flashing

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2019-03-21 00:57:20 +01:00
..
base-files ramips: add support for I-O DATA WN-AC733GR3 2019-03-21 00:57:20 +01:00
dts ramips: add support for I-O DATA WN-AC733GR3 2019-03-21 00:57:20 +01:00
files-4.14/drivers ramips: fix two-way hash and auto ageout on MT7621 2019-01-23 09:27:30 +01:00
image ramips: add support for I-O DATA WN-AC733GR3 2019-03-21 00:57:20 +01:00
mt76x8 ramips: disable CONFIG_MTD_SPLIT_FIRMWARE 2019-01-26 21:46:33 +01:00
mt7620 ramips: disable CONFIG_MTD_SPLIT_FIRMWARE 2019-01-26 21:46:33 +01:00
mt7621 ramips: mt7621: disable CONFIG_MTD_SPLIT_FIRMWARE 2018-12-13 13:39:56 +01:00
patches-4.14 kernel: bump 4.14 to 4.14.106 2019-03-18 10:02:51 +01:00
rt288x ramips: disable CONFIG_MTD_SPLIT_FIRMWARE 2019-01-26 21:46:33 +01:00
rt305x ramips: disable CONFIG_MTD_SPLIT_FIRMWARE 2019-01-26 21:46:33 +01:00
rt3883 ramips: rt3883: drop jimage support 2019-01-26 21:46:33 +01:00
Makefile ramips: switch to linux 4.14 2018-04-06 18:07:43 +02:00
modules.mk kernel: Fix kmod-regmap split 2019-01-27 11:07:14 +01:00