immortalwrt/target/linux/ramips/mt7621
Sungbo Eo 3c2a0a499e ramips: add support for ipTIME T5004
ipTIME T5004 is a 5-port Gigabit Ethernet router, based on MediaTek MT7621A.

Specifications:
* SoC: MT7621AT
* RAM: 128 MiB
* Flash: NAND 128 MiB
* Ethernet: 5x 1GbE
  * Switch: SoC built-in
* UART: J4 (57600 baud)
  * Pinout: [3V3] (TXD) (RXD) (GND)

Installation via web interface:
1.  Flash **initramfs** image through the stock web interface.
2.  Boot into OpenWrt and perform sysupgrade with sysupgrade image.

Revert to stock firmware via recovery mode:
1.  Press reset button, power up the device, wait >15s for CPU LED
    to stop blinking.
2.  Upload stock image to TFTP server at 192.168.0.1.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2022-04-16 23:29:49 +08:00
..
base-files ramips: add support for ipTIME T5004 2022-04-16 23:29:49 +08:00
config-5.4 ramips: enable I2C_CHARDEV 2021-09-27 23:54:14 +08:00
config-5.10 ramips: enable I2C_CHARDEV in mt7621/config-5.10 2022-01-29 18:57:52 +08:00
target.mk mt7621: mikrotik: use vmlinuz (zBoot ELF) 2020-10-31 10:19:33 +08:00