Roberto Valentini 7522b492e6 ath79: add support for TP-Link RE455 v1 ... TP-Link RE455 v1 is a dual band router/range-extender based on Qualcomm/Atheros QCA9563 + QCA9880. This device is nearly identical to RE450 v3 Specification: - 775 MHz CPU - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 3T3R 5 GHz - 1x 10/100/1000 Mbps Ethernet (AR8033 PHY) - 7x LED, 4x button - UART header on PCB[1] Flash instruction: Apply factory image in OEM firmware web-gui. [1] Didn't work, probably need to short unpopulated resistor R64 and R69 as RE450v3 Signed-off-by: Roberto Valentini <valantin89@gmail.com>		2021-07-12 12:05:08 +08:00
..
imagebuilder	imagebuilder: unset BINARY_FOLDER and DOWNLOAD_FOLDER in final archive	2021-05-09 00:35:59 +08:00
linux	ath79: add support for TP-Link RE455 v1	2021-07-12 12:05:08 +08:00
sdk	sdk: generate correct base feed	2021-05-26 22:34:13 +08:00
toolchain	build: improve ccache support	2021-01-02 12:08:17 +08:00
Config.in	include/image*: add support for device-tree overlays	2021-03-18 23:23:45 +08:00
Makefile