70f07967a3
Hardware -------- RockChip RK3568 ARM64 (4 cores) 2/4/8GB LPDDR4 RAM 1000 Base-T eMMC on-board M.2 Slot Micro-SD Slot HDMI Port 3.5mm Audio Jack 2x USB 3.0 Port 2x USB 2.0 Port Type-C PD Power Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
116 lines
2.9 KiB
Diff
116 lines
2.9 KiB
Diff
From 8cf890aabd45664b8f27a5581c8d2a51a8ce2e17 Mon Sep 17 00:00:00 2001
|
|
From: Shengyu Qu <wiagn233@outlook.com>
|
|
Date: Sun, 30 Oct 2022 01:09:08 +0800
|
|
Subject: [PATCH] arm64: dts: rockchip: Add nodes for SDIO/UART Wi-Fi/Bluetooth
|
|
modules to Radxa Rock 3A
|
|
|
|
This patch adds related bus/pinctrl/power nodes to enable support for
|
|
Radxa's Wi-Fi Bluetooth combo module.
|
|
Tested with RADXA A6 module, which uses AP6275S (BCM43752A2)
|
|
|
|
Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
|
|
Link: https://lore.kernel.org/r/OS3P286MB25972313C916A68698B1CD8698359@OS3P286MB2597.JPNP286.PROD.OUTLOOK.COM
|
|
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
---
|
|
.../boot/dts/rockchip/rk3568-rock-3a.dts | 69 +++++++++++++++++++
|
|
1 file changed, 69 insertions(+)
|
|
|
|
--- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
|
|
+++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
|
|
@@ -60,6 +60,17 @@
|
|
};
|
|
};
|
|
|
|
+ sdio_pwrseq: sdio-pwrseq {
|
|
+ compatible = "mmc-pwrseq-simple";
|
|
+ clocks = <&rk809 1>;
|
|
+ clock-names = "ext_clock";
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&wifi_enable>;
|
|
+ post-power-on-delay-ms = <100>;
|
|
+ power-off-delay-us = <5000000>;
|
|
+ reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+
|
|
vcc12v_dcin: vcc12v-dcin-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc12v_dcin";
|
|
@@ -655,6 +666,26 @@
|
|
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
+
|
|
+ bt {
|
|
+ bt_enable: bt-enable {
|
|
+ rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
+ };
|
|
+
|
|
+ bt_host_wake: bt-host-wake {
|
|
+ rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
+ };
|
|
+
|
|
+ bt_wake: bt-wake {
|
|
+ rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ sdio-pwrseq {
|
|
+ wifi_enable: wifi-enable {
|
|
+ rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
+ };
|
|
+ };
|
|
};
|
|
|
|
&pmu_io_domains {
|
|
@@ -699,12 +730,50 @@
|
|
status = "okay";
|
|
};
|
|
|
|
+&sdmmc2 {
|
|
+ supports-sdio;
|
|
+ bus-width = <4>;
|
|
+ disable-wp;
|
|
+ cap-sd-highspeed;
|
|
+ cap-sdio-irq;
|
|
+ keep-power-in-suspend;
|
|
+ mmc-pwrseq = <&sdio_pwrseq>;
|
|
+ non-removable;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
|
|
+ sd-uhs-sdr104;
|
|
+ vmmc-supply = <&vcc3v3_sys>;
|
|
+ vqmmc-supply = <&vcc_1v8>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
&tsadc {
|
|
rockchip,hw-tshut-mode = <1>;
|
|
rockchip,hw-tshut-polarity = <0>;
|
|
status = "okay";
|
|
};
|
|
|
|
+&uart1 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
|
|
+ uart-has-rtscts;
|
|
+ status = "okay";
|
|
+
|
|
+ bluetooth {
|
|
+ compatible = "brcm,bcm43438-bt";
|
|
+ clocks = <&rk809 1>;
|
|
+ clock-names = "lpo";
|
|
+ device-wakeup-gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
|
|
+ host-wakeup-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
|
|
+ shutdown-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&bt_host_wake &bt_wake &bt_enable>;
|
|
+ vbat-supply = <&vcc3v3_sys>;
|
|
+ vddio-supply = <&vcc_1v8>;
|
|
+ /* vddio comes from regulator on module, use IO bank voltage instead */
|
|
+ };
|
|
+};
|
|
+
|
|
&uart2 {
|
|
status = "okay";
|
|
};
|