David Bauer a4dc519888 ramips: fix R6120 factory image ... The factory firmware omits the JFFS2 end-marker while flashing via web-interface. Add a 64k padding after the marker fixes this problem. When the end-marker is not present, OpenWRT won't save the overlayfs after initial flash. Reported-by: Andreas Ziegler <dev@andreas-ziegler.de> Signed-off-by: David Bauer <mail@david-bauer.net>		2019-05-11 16:37:11 +02:00
..
lzma-loader	ramips: Add support for mt7621 to lzma-loader	2018-06-21 06:54:42 +02:00
Makefile	firmware-utils: mkdlinkfw: add kernel image offset	2019-03-24 01:44:24 +01:00
mt76x8.mk	ramips: fix R6120 factory image	2019-05-11 16:37:11 +02:00
mt7620.mk	ramips: add support for DLINK DIR-510L	2019-03-24 01:44:24 +01:00
mt7621.mk	ramips: add support for Youku YK-L2	2019-04-06 19:13:49 +02:00
rt288x.mk	ramips: use patch-dtb for F5D8235 V1	2018-04-23 22:07:22 +02:00
rt305x.mk	ramips: add support for ZyXEL Keenetic Start	2019-03-29 07:34:00 +00:00
rt3883.mk	ramips: add support for Belkin F9K1109v1	2019-03-02 13:04:45 +01:00