immortalwrt/target/linux/ramips
Stijn Segers 7b80a74e3a ramips: overwrite reset gpio properties in DIR-860L DTS
As suggested by Sergio, this adds GPIOs 19 and 8 explicitly into the
DIR-860L DTS, so the PCI-E ports get reset and the N radio (radio1)
on PCI-E port 1 comes up reliably.

Fixes the following error that popped up in dmesg:

    [    1.638942] mt7621-pci 1e140000.pcie: pcie1 no card, disable it (RST & CLK)

Suggested-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Stijn Segers <foss@volatilesystems.org>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
2021-02-24 12:24:45 +08:00
..
base-files/etc ramips: remove model name from LED labels 2020-11-21 19:29:29 +08:00
dts ramips: overwrite reset gpio properties in DIR-860L DTS 2021-02-24 12:24:45 +08:00
files/drivers Merge Mainline 2021-02-16 14:50:17 +08:00
image treewide: select kmod-mt7615-firmware where kmod-mt7615e is selected 2021-02-20 18:06:07 +08:00
mt76x8 ramips: add support for ELECOM WRC-1167FS 2021-02-12 12:11:22 +08:00
mt7620 ramips: fix Phicomm PSG1218A switch port labels 2021-02-23 12:19:01 +08:00
mt7621 ramips: mt7621: enable SX150x driver 2021-02-24 12:24:04 +08:00
patches-5.4 kernel: bump 5.4 to 5.4.99 2021-02-19 03:30:02 +08:00
rt288x ramips: remove set_wifi_led function in 01_leds 2021-02-12 12:11:00 +08:00
rt305x ramips: remove set_wifi_led function in 01_leds 2021-02-12 12:11:00 +08:00
rt3883 ramips: remove set_wifi_led function in 01_leds 2021-02-12 12:11:00 +08:00
Makefile target: use SPDX license identifiers on Makefiles 2021-02-11 12:05:39 +08:00
modules.mk target: use SPDX license identifiers on Makefiles 2021-02-11 12:05:39 +08:00