7ff0efa0b0
I-O DATA WN-DX2033GR is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 128 MiB - Flash : Raw NAND 128 MiB (Macronix MX30LF1G18AC-TI) - WLAN : 2.4/5 GHz - 2.4 GHz : 2T2R, MediaTek MT7603E - 5 GHz : 4T4R, MediaTek MT7615 - Ethernet : 5x 10/100/1000 Mbps - Switch : MediaTek MT7530 (SoC) - LEDs/Keys : 2x/3x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J5: 3.3V, TX, RX, NC, GND from triangle mark - 57600n8 - Power : 12 VDC, 1 A Flash instruction using initramfs image: 1. Boot WN-DX2033GR normally 2. Access to "http://192.168.0.1/" and open firmware update page ("ファームウェア") 3. Select the OpenWrt initramfs image and click update ("更新") button to perform firmware update 4. On the initramfs image, download the sysupgrade.bin image to the device and perform sysupgrade with it 5. Wait ~120 seconds to complete flashing Notes: - The hardware of WN-DX2033GR and WN-AX2033GR are almost the same, and it is certified under the same radio-wave related regulations in Japan - The last 0x80000 (512 KiB) in NAND flash is not used on stock firmware - stock firmware requires "customized uImage header" (called as "combo image") by MSTC (MitraStar Technology Corp.), but U-Boot doesn't - uImage magic ( 0x0 - 0x3 ) : 0x434F4D42 ("COMB") - header crc32 ( 0x4 - 0x7 ) : with "data length" and "data crc32" - image name (0x20 - 0x37) : model ID and firmware versions - data length (0x38 - 0x3b) : kernel + rootfs - data crc32 (0x3c - 0x3f) : kernel + rootfs - There are 2x important flags in the flash: - bootnum : select os partition for booting (persist, 0x4) - 0x01: firmware - 0x02: firmware_2 - debugflag : allow interrupt kernel loader, it's named as "Z-LOADER" (Factory, 0xFE75) - 0x00: disable debug - 0x01: enable debug MAC addresses: LAN : 50:41:B9:xx:xx:90 (Factory, 0xE000 (hex) / Ubootenv, ethaddr (text)) WAN : 50:41:B9:xx:xx:92 (Factory, 0xE006 (hex)) 2.4 GHz : 50:41:B9:xx:xx:90 (Factory, 0x4 (hex)) 5 GHz : 50:41:B9:xx:xx:91 (Factory, 0x8004 (hex)) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
1725 lines
48 KiB
Makefile
1725 lines
48 KiB
Makefile
#
|
|
# MT7621 Profiles
|
|
#
|
|
|
|
include ./common-tp-link.mk
|
|
|
|
DEFAULT_SOC := mt7621
|
|
|
|
KERNEL_DTB += -d21
|
|
DEVICE_VARS += ELECOM_HWNAME LINKSYS_HWNAME
|
|
|
|
define Build/elecom-wrc-gs-factory
|
|
$(eval product=$(word 1,$(1)))
|
|
$(eval version=$(word 2,$(1)))
|
|
$(eval hash_opt=$(word 3,$(1)))
|
|
$(MKHASH) md5 $(hash_opt) $@ >> $@
|
|
( \
|
|
echo -n "ELECOM $(product) v$(version)" | \
|
|
dd bs=32 count=1 conv=sync; \
|
|
dd if=$@; \
|
|
) > $@.new
|
|
mv $@.new $@
|
|
endef
|
|
|
|
define Build/gemtek-trailer
|
|
printf "%s%08X" ".GEMTEK." "$$(cksum $@ | cut -d ' ' -f1)" >> $@
|
|
endef
|
|
|
|
define Build/iodata-factory
|
|
$(eval fw_size=$(word 1,$(1)))
|
|
$(eval fw_type=$(word 2,$(1)))
|
|
$(eval product=$(word 3,$(1)))
|
|
$(eval factory_bin=$(word 4,$(1)))
|
|
if [ -e $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) -a "$$(stat -c%s $@)" -lt "$(fw_size)" ]; then \
|
|
$(CP) $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) $(factory_bin); \
|
|
$(STAGING_DIR_HOST)/bin/mksenaofw \
|
|
-r 0x30a -p $(product) -t $(fw_type) \
|
|
-e $(factory_bin) -o $(factory_bin).new; \
|
|
mv $(factory_bin).new $(factory_bin); \
|
|
$(CP) $(factory_bin) $(BIN_DIR)/; \
|
|
else \
|
|
echo "WARNING: initramfs kernel image too big, cannot generate factory image" >&2; \
|
|
fi
|
|
endef
|
|
|
|
define Build/iodata-mstc-header
|
|
( \
|
|
data_size_crc="$$(dd if=$@ ibs=64 skip=1 2>/dev/null | gzip -c | \
|
|
tail -c 8 | od -An -tx8 --endian little | tr -d ' \n')"; \
|
|
echo -ne "$$(echo $$data_size_crc | sed 's/../\\x&/g')" | \
|
|
dd of=$@ bs=8 count=1 seek=7 conv=notrunc 2>/dev/null; \
|
|
)
|
|
dd if=/dev/zero of=$@ bs=4 count=1 seek=1 conv=notrunc 2>/dev/null
|
|
( \
|
|
header_crc="$$(dd if=$@ bs=64 count=1 2>/dev/null | gzip -c | \
|
|
tail -c 8 | od -An -N4 -tx4 --endian little | tr -d ' \n')"; \
|
|
echo -ne "$$(echo $$header_crc | sed 's/../\\x&/g')" | \
|
|
dd of=$@ bs=4 count=1 seek=1 conv=notrunc 2>/dev/null; \
|
|
)
|
|
endef
|
|
|
|
define Build/ubnt-erx-factory-image
|
|
if [ -e $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) -a "$$(stat -c%s $@)" -lt "$(KERNEL_SIZE)" ]; then \
|
|
echo '21001:7' > $(1).compat; \
|
|
$(TAR) -cf $(1) --transform='s/^.*/compat/' $(1).compat; \
|
|
\
|
|
$(TAR) -rf $(1) --transform='s/^.*/vmlinux.tmp/' $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE); \
|
|
$(MKHASH) md5 $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) > $(1).md5; \
|
|
$(TAR) -rf $(1) --transform='s/^.*/vmlinux.tmp.md5/' $(1).md5; \
|
|
\
|
|
echo "dummy" > $(1).rootfs; \
|
|
$(TAR) -rf $(1) --transform='s/^.*/squashfs.tmp/' $(1).rootfs; \
|
|
\
|
|
$(MKHASH) md5 $(1).rootfs > $(1).md5; \
|
|
$(TAR) -rf $(1) --transform='s/^.*/squashfs.tmp.md5/' $(1).md5; \
|
|
\
|
|
echo '$(BOARD) $(VERSION_CODE) $(VERSION_NUMBER)' > $(1).version; \
|
|
$(TAR) -rf $(1) --transform='s/^.*/version.tmp/' $(1).version; \
|
|
\
|
|
$(CP) $(1) $(BIN_DIR)/; \
|
|
else \
|
|
echo "WARNING: initramfs kernel image too big, cannot generate factory image" >&2; \
|
|
fi
|
|
endef
|
|
|
|
define Build/zytrx-header
|
|
$(eval board=$(word 1,$(1)))
|
|
$(eval version=$(word 2,$(1)))
|
|
$(STAGING_DIR_HOST)/bin/zytrx -B '$(board)' -v '$(version)' -i $@ -o $@.new
|
|
mv $@.new $@
|
|
endef
|
|
|
|
define Device/dsa-migration
|
|
DEVICE_COMPAT_VERSION := 1.1
|
|
DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
|
|
endef
|
|
|
|
define Device/adslr_g7
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := ADSLR
|
|
DEVICE_MODEL := G7
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += adslr_g7
|
|
|
|
define Device/afoundry_ew1200
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := AFOUNDRY
|
|
DEVICE_MODEL := EW1200
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-mt76x2 kmod-mt7603 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
SUPPORTED_DEVICES += ew1200
|
|
endef
|
|
TARGET_DEVICES += afoundry_ew1200
|
|
|
|
define Device/alfa-network_quad-e4g
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := ALFA Network
|
|
DEVICE_MODEL := Quad-E4G
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-usb3 uboot-envtools \
|
|
-wpad-basic-wolfssl
|
|
SUPPORTED_DEVICES += quad-e4g
|
|
endef
|
|
TARGET_DEVICES += alfa-network_quad-e4g
|
|
|
|
define Device/ampedwireless_ally_common
|
|
$(Device/dsa-migration)
|
|
DEVICE_VENDOR := Amped Wireless
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware uboot-envtools
|
|
IMAGE_SIZE := 32768k
|
|
KERNEL_SIZE := 4096k
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
UBINIZE_OPTS := -E 5
|
|
KERNEL_INITRAMFS := $(KERNEL_DTB) | uImage lzma -n 'flashable-initramfs' |\
|
|
edimax-header -s CSYS -m RN68 -f 0x001c0000 -S 0x01100000
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
|
|
define Device/ampedwireless_ally-r1900k
|
|
$(Device/ampedwireless_ally_common)
|
|
DEVICE_MODEL := ALLY-R1900K
|
|
DEVICE_PACKAGES += kmod-usb3
|
|
endef
|
|
TARGET_DEVICES += ampedwireless_ally-r1900k
|
|
|
|
define Device/ampedwireless_ally-00x19k
|
|
$(Device/ampedwireless_ally_common)
|
|
DEVICE_MODEL := ALLY-00X19K
|
|
endef
|
|
TARGET_DEVICES += ampedwireless_ally-00x19k
|
|
|
|
define Device/asiarf_ap7621-001
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16000k
|
|
DEVICE_VENDOR := AsiaRF
|
|
DEVICE_MODEL := AP7621-001
|
|
DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt76x2 kmod-usb3 -wpad-basic-wolfssl
|
|
endef
|
|
TARGET_DEVICES += asiarf_ap7621-001
|
|
|
|
define Device/asiarf_ap7621-nv1
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16000k
|
|
DEVICE_VENDOR := AsiaRF
|
|
DEVICE_MODEL := AP7621-NV1
|
|
DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt76x2 kmod-usb3 -wpad-basic-wolfssl
|
|
endef
|
|
TARGET_DEVICES += asiarf_ap7621-nv1
|
|
|
|
define Device/asus_rt-ac57u
|
|
$(Device/dsa-migration)
|
|
DEVICE_VENDOR := ASUS
|
|
DEVICE_MODEL := RT-AC57U
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += asus_rt-ac57u
|
|
|
|
define Device/asus_rt-ac65p
|
|
$(Device/dsa-migration)
|
|
DEVICE_VENDOR := ASUS
|
|
DEVICE_MODEL := RT-AC65P
|
|
IMAGE_SIZE := 51200k
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_SIZE := 4096k
|
|
IMAGES += factory.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
|
|
check-size
|
|
DEVICE_PACKAGES := kmod-usb3 kmod-mt7615e kmod-mt7615-firmware uboot-envtools
|
|
endef
|
|
TARGET_DEVICES += asus_rt-ac65p
|
|
|
|
define Device/asus_rt-ac85p
|
|
$(Device/dsa-migration)
|
|
DEVICE_VENDOR := ASUS
|
|
DEVICE_MODEL := RT-AC85P
|
|
IMAGE_SIZE := 51200k
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_SIZE := 4096k
|
|
IMAGES += factory.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
|
|
check-size
|
|
DEVICE_PACKAGES := kmod-usb3 kmod-mt7615e kmod-mt7615-firmware uboot-envtools
|
|
endef
|
|
TARGET_DEVICES += asus_rt-ac85p
|
|
|
|
define Device/asus_rt-n56u-b1
|
|
$(Device/dsa-migration)
|
|
DEVICE_VENDOR := ASUS
|
|
DEVICE_MODEL := RT-N56U
|
|
DEVICE_VARIANT := B1
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += asus_rt-n56u-b1
|
|
|
|
define Device/buffalo_wsr-1166dhp
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE/sysupgrade.bin := trx | pad-rootfs | append-metadata
|
|
IMAGE_SIZE := 15936k
|
|
DEVICE_VENDOR := Buffalo
|
|
DEVICE_MODEL := WSR-1166DHP
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2
|
|
SUPPORTED_DEVICES += wsr-1166
|
|
endef
|
|
TARGET_DEVICES += buffalo_wsr-1166dhp
|
|
|
|
define Device/buffalo_wsr-2533dhpl
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 7936k
|
|
DEVICE_VENDOR := Buffalo
|
|
DEVICE_MODEL := WSR-2533DHPL
|
|
DEVICE_ALT0_VENDOR := Buffalo
|
|
DEVICE_ALT0_MODEL := WSR-2533DHP
|
|
IMAGE/sysupgrade.bin := trx | pad-rootfs | append-metadata
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += buffalo_wsr-2533dhpl
|
|
|
|
define Device/buffalo_wsr-600dhp
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Buffalo
|
|
DEVICE_MODEL := WSR-600DHP
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-rt2800-pci
|
|
SUPPORTED_DEVICES += wsr-600
|
|
endef
|
|
TARGET_DEVICES += buffalo_wsr-600dhp
|
|
|
|
define Device/cudy_wr1300
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 15872k
|
|
DEVICE_VENDOR := Cudy
|
|
DEVICE_MODEL := WR1300
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb2 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += cudy_wr1300
|
|
|
|
define Device/cudy_wr2100
|
|
$(Device/dsa-migration)
|
|
DEVICE_VENDOR := Cudy
|
|
DEVICE_MODEL := WR2100
|
|
IMAGE_SIZE := 15872k
|
|
UIMAGE_NAME := R11
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += cudy_wr2100
|
|
|
|
define Device/dlink_dir-8xx-a1
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16000k
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
|
|
KERNEL := $$(KERNEL) | uimage-sgehdr
|
|
IMAGES += factory.bin
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
|
|
check-size | append-metadata
|
|
IMAGE/factory.bin := append-kernel | append-rootfs | check-size
|
|
endef
|
|
|
|
define Device/dlink_dir-8xx-r1
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
|
|
KERNEL_INITRAMFS := $$(KERNEL)
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
|
|
check-size | append-metadata
|
|
endef
|
|
|
|
define Device/dlink_dir-xx60-a1
|
|
$(Device/dsa-migration)
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 40960k
|
|
UBINIZE_OPTS := -E 5
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
KERNEL := $$(KERNEL) | uimage-sgehdr
|
|
IMAGES += factory.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
|
|
check-size
|
|
endef
|
|
|
|
define Device/dlink_dir-1960-a1
|
|
$(Device/dlink_dir-xx60-a1)
|
|
DEVICE_MODEL := DIR-1960
|
|
DEVICE_VARIANT := A1
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-1960-a1
|
|
|
|
define Device/dlink_dir-2640-a1
|
|
$(Device/dlink_dir-xx60-a1)
|
|
DEVICE_MODEL := DIR-2640
|
|
DEVICE_VARIANT := A1
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-2640-a1
|
|
|
|
define Device/dlink_dir-2660-a1
|
|
$(Device/dlink_dir-xx60-a1)
|
|
DEVICE_MODEL := DIR-2660
|
|
DEVICE_VARIANT := A1
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-2660-a1
|
|
|
|
define Device/dlink_dir-853-a3
|
|
$(Device/dlink_dir-xx60-a1)
|
|
DEVICE_MODEL := DIR-853
|
|
DEVICE_VARIANT := A3
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-853-a3
|
|
|
|
define Device/dlink_dir-853-r1
|
|
$(Device/dlink_dir-8xx-r1)
|
|
DEVICE_MODEL := DIR-853
|
|
DEVICE_VARIANT := R1
|
|
DEVICE_PACKAGES += kmod-usb3 kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-853-r1
|
|
|
|
define Device/dlink_dir-860l-b1
|
|
$(Device/dsa-migration)
|
|
$(Device/seama)
|
|
SEAMA_SIGNATURE := wrgac13_dlink.2013gui_dir860lb
|
|
LOADER_TYPE := bin
|
|
KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | relocate-kernel | \
|
|
lzma -a0 | uImage lzma
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DIR-860L
|
|
DEVICE_VARIANT := B1
|
|
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport
|
|
SUPPORTED_DEVICES += dir-860l-b1
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-860l-b1
|
|
|
|
define Device/dlink_dir-867-a1
|
|
$(Device/dlink_dir-8xx-a1)
|
|
DEVICE_MODEL := DIR-867
|
|
DEVICE_VARIANT := A1
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-867-a1
|
|
|
|
define Device/dlink_dir-878-a1
|
|
$(Device/dlink_dir-8xx-a1)
|
|
DEVICE_MODEL := DIR-878
|
|
DEVICE_VARIANT := A1
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-878-a1
|
|
|
|
define Device/dlink_dir-882-a1
|
|
$(Device/dlink_dir-8xx-a1)
|
|
DEVICE_MODEL := DIR-882
|
|
DEVICE_VARIANT := A1
|
|
DEVICE_PACKAGES += kmod-usb3 kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-882-a1
|
|
|
|
define Device/dlink_dir-882-r1
|
|
$(Device/dlink_dir-8xx-r1)
|
|
DEVICE_MODEL := DIR-882
|
|
DEVICE_VARIANT := R1
|
|
DEVICE_PACKAGES += kmod-usb3 kmod-usb-ledtrig-usbport
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | append-rootfs | check-size | \
|
|
sign-dlink-ru 57c5375741c30ca9ebcb36713db4ba51 \
|
|
ab0dff19af8842cdb70a86b4b68d23f7
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-882-r1
|
|
|
|
define Device/d-team_newifi-d2
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 32448k
|
|
DEVICE_VENDOR := Newifi
|
|
DEVICE_MODEL := D2
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += d-team_newifi-d2
|
|
|
|
define Device/d-team_pbr-m1
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 32448k
|
|
DEVICE_VENDOR := PandoraBox
|
|
DEVICE_MODEL := PBR-M1
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-mt7603 kmod-mt76x2 kmod-sdhci-mt7620 \
|
|
kmod-usb3 kmod-usb-ledtrig-usbport
|
|
SUPPORTED_DEVICES += pbr-m1
|
|
endef
|
|
TARGET_DEVICES += d-team_pbr-m1
|
|
|
|
define Device/edimax_ra21s
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Edimax
|
|
DEVICE_MODEL := RA21S
|
|
DEVICE_ALT0_VENDOR := Edimax
|
|
DEVICE_ALT0_MODEL := Gemini RA21S
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
|
|
elx-header 02020040 8844A2D168B45A2D
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += edimax_ra21s
|
|
|
|
define Device/edimax_re23s
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 15680k
|
|
DEVICE_VENDOR := Edimax
|
|
DEVICE_MODEL := RE23S
|
|
DEVICE_ALT0_VENDOR := Edimax
|
|
DEVICE_ALT0_MODEL := Gemini RE23S
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
|
|
edimax-header -s CSYS -m RN76 -f 0x70000 -S 0x01100000 | pad-rootfs | \
|
|
check-size | append-metadata
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | append-rootfs | \
|
|
edimax-header -s CSYS -m RN76 -f 0x70000 -S 0x01100000 | pad-rootfs | \
|
|
check-size
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += edimax_re23s
|
|
|
|
define Device/edimax_rg21s
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Edimax
|
|
DEVICE_MODEL := Gemini AC2600 RG21S
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
|
|
elx-header 02020038 8844A2D168B45A2D
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += edimax_rg21s
|
|
|
|
define Device/elecom_wrc-1167ghbk2-s
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 15488k
|
|
DEVICE_VENDOR := ELECOM
|
|
DEVICE_MODEL := WRC-1167GHBK2-S
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
|
|
elecom-wrc-gs-factory WRC-1167GHBK2-S 0.00
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += elecom_wrc-1167ghbk2-s
|
|
|
|
define Device/elecom_wrc-gs
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
DEVICE_VENDOR := ELECOM
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
|
|
elecom-wrc-gs-factory $$$$(ELECOM_HWNAME) 0.00 -N | \
|
|
append-string MT7621_ELECOM_$$$$(ELECOM_HWNAME)
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
|
|
define Device/elecom_wrc-1167gs2-b
|
|
$(Device/elecom_wrc-gs)
|
|
IMAGE_SIZE := 11264k
|
|
DEVICE_MODEL := WRC-1167GS2-B
|
|
ELECOM_HWNAME := WRC-1167GS2
|
|
endef
|
|
TARGET_DEVICES += elecom_wrc-1167gs2-b
|
|
|
|
define Device/elecom_wrc-1167gst2
|
|
$(Device/elecom_wrc-gs)
|
|
IMAGE_SIZE := 24576k
|
|
DEVICE_MODEL := WRC-1167GST2
|
|
ELECOM_HWNAME := WRC-1167GST2
|
|
endef
|
|
TARGET_DEVICES += elecom_wrc-1167gst2
|
|
|
|
define Device/elecom_wrc-1750gs
|
|
$(Device/elecom_wrc-gs)
|
|
IMAGE_SIZE := 11264k
|
|
DEVICE_MODEL := WRC-1750GS
|
|
ELECOM_HWNAME := WRC-1750GS
|
|
endef
|
|
TARGET_DEVICES += elecom_wrc-1750gs
|
|
|
|
define Device/elecom_wrc-1750gst2
|
|
$(Device/elecom_wrc-gs)
|
|
IMAGE_SIZE := 24576k
|
|
DEVICE_MODEL := WRC-1750GST2
|
|
ELECOM_HWNAME := WRC-1750GST2
|
|
endef
|
|
TARGET_DEVICES += elecom_wrc-1750gst2
|
|
|
|
define Device/elecom_wrc-1750gsv
|
|
$(Device/elecom_wrc-gs)
|
|
IMAGE_SIZE := 11264k
|
|
DEVICE_MODEL := WRC-1750GSV
|
|
ELECOM_HWNAME := WRC-1750GSV
|
|
endef
|
|
TARGET_DEVICES += elecom_wrc-1750gsv
|
|
|
|
define Device/elecom_wrc-1900gst
|
|
$(Device/elecom_wrc-gs)
|
|
IMAGE_SIZE := 11264k
|
|
DEVICE_MODEL := WRC-1900GST
|
|
ELECOM_HWNAME := WRC-1900GST
|
|
endef
|
|
TARGET_DEVICES += elecom_wrc-1900gst
|
|
|
|
define Device/elecom_wrc-2533ghbk-i
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
DEVICE_VENDOR := ELECOM
|
|
DEVICE_MODEL := WRC-2533GHBK-I
|
|
IMAGE_SIZE := 9856k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
|
|
elx-header 0107002d 8844A2D168B45A2D | \
|
|
elecom-product-header WRC-2533GHBK-I
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += elecom_wrc-2533ghbk-i
|
|
|
|
define Device/elecom_wrc-2533gst
|
|
$(Device/elecom_wrc-gs)
|
|
IMAGE_SIZE := 11264k
|
|
DEVICE_MODEL := WRC-2533GST
|
|
ELECOM_HWNAME := WRC-2533GST
|
|
endef
|
|
TARGET_DEVICES += elecom_wrc-2533gst
|
|
|
|
define Device/elecom_wrc-2533gst2
|
|
$(Device/elecom_wrc-gs)
|
|
IMAGE_SIZE := 24576k
|
|
DEVICE_MODEL := WRC-2533GST2
|
|
ELECOM_HWNAME := WRC-2533GST2
|
|
endef
|
|
TARGET_DEVICES += elecom_wrc-2533gst2
|
|
|
|
define Device/firefly_firewrt
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Firefly
|
|
DEVICE_MODEL := FireWRT
|
|
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport
|
|
SUPPORTED_DEVICES += firewrt
|
|
endef
|
|
TARGET_DEVICES += firefly_firewrt
|
|
|
|
define Device/gehua_ghl-r-001
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 32448k
|
|
DEVICE_VENDOR := GeHua
|
|
DEVICE_MODEL := GHL-R-001
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += gehua_ghl-r-001
|
|
|
|
define Device/glinet_gl-mt1300
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 32448k
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_MODEL := GL-MT1300
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware kmod-usb3
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-mt1300
|
|
|
|
define Device/gnubee_gb-pc1
|
|
$(Device/dsa-migration)
|
|
DEVICE_VENDOR := GnuBee
|
|
DEVICE_MODEL := Personal Cloud One
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-usb3 kmod-sdhci-mt7620 -wpad-basic-wolfssl
|
|
IMAGE_SIZE := 32448k
|
|
endef
|
|
TARGET_DEVICES += gnubee_gb-pc1
|
|
|
|
define Device/gnubee_gb-pc2
|
|
$(Device/dsa-migration)
|
|
DEVICE_VENDOR := GnuBee
|
|
DEVICE_MODEL := Personal Cloud Two
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-usb3 kmod-sdhci-mt7620 -wpad-basic-wolfssl
|
|
IMAGE_SIZE := 32448k
|
|
endef
|
|
TARGET_DEVICES += gnubee_gb-pc2
|
|
|
|
define Device/hiwifi_hc5962
|
|
$(Device/dsa-migration)
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_SIZE := 4096k
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGE_SIZE := 32768k
|
|
IMAGES += factory.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
|
|
check-size
|
|
DEVICE_VENDOR := HiWiFi
|
|
DEVICE_MODEL := HC5962
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3
|
|
endef
|
|
TARGET_DEVICES += hiwifi_hc5962
|
|
|
|
define Device/iodata_wn-ax1167gr
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 15552k
|
|
KERNEL_INITRAMFS := $$(KERNEL) | \
|
|
iodata-factory 7864320 4 0x1055 $(KDIR)/tmp/$$(KERNEL_INITRAMFS_PREFIX)-factory.bin
|
|
DEVICE_VENDOR := I-O DATA
|
|
DEVICE_MODEL := WN-AX1167GR
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2
|
|
endef
|
|
TARGET_DEVICES += iodata_wn-ax1167gr
|
|
|
|
define Device/iodata_nand
|
|
$(Device/dsa-migration)
|
|
DEVICE_VENDOR := I-O DATA
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
UBINIZE_OPTS := -E 5
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 51200k
|
|
LOADER_TYPE := bin
|
|
KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | lzma | uImage lzma
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
|
|
# The OEM webinterface expects an kernel with initramfs which has the uImage
|
|
# header field ih_name.
|
|
# We don't want to set the header name field for the kernel include in the
|
|
# sysupgrade image as well, as this image shouldn't be accepted by the OEM
|
|
# webinterface. It will soft-brick the board.
|
|
|
|
define Device/iodata_wn-ax1167gr2
|
|
$(Device/iodata_nand)
|
|
DEVICE_MODEL := WN-AX1167GR2
|
|
KERNEL_INITRAMFS := $(KERNEL_DTB) | loader-kernel | lzma | \
|
|
uImage lzma -M 0x434f4d42 -n '3.10(XBC.1)b10' | iodata-mstc-header
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += iodata_wn-ax1167gr2
|
|
|
|
define Device/iodata_wn-ax2033gr
|
|
$(Device/iodata_nand)
|
|
DEVICE_MODEL := WN-AX2033GR
|
|
KERNEL_INITRAMFS := $(KERNEL_DTB) | loader-kernel | lzma | \
|
|
uImage lzma -M 0x434f4d42 -n '3.10(VST.1)C10' | iodata-mstc-header
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += iodata_wn-ax2033gr
|
|
|
|
define Device/iodata_wn-dx1167r
|
|
$(Device/iodata_nand)
|
|
DEVICE_MODEL := WN-DX1167R
|
|
KERNEL_INITRAMFS := $(KERNEL_DTB) | loader-kernel | lzma | \
|
|
uImage lzma -M 0x434f4d43 -n '3.10(XIK.1)b10' | iodata-mstc-header
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += iodata_wn-dx1167r
|
|
|
|
define Device/iodata_wn-dx1200gr
|
|
$(Device/iodata_nand)
|
|
DEVICE_MODEL := WN-DX1200GR
|
|
KERNEL_INITRAMFS := $(KERNEL_DTB) | loader-kernel | lzma | \
|
|
uImage lzma -M 0x434f4d43 -n '3.10(XIQ.0)b20' | iodata-mstc-header
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap
|
|
endef
|
|
TARGET_DEVICES += iodata_wn-dx1200gr
|
|
|
|
define Device/iodata_wn-dx2033gr
|
|
$(Device/iodata_nand)
|
|
DEVICE_MODEL := WN-DX2033GR
|
|
KERNEL_INITRAMFS := $(KERNEL_DTB) | loader-kernel | lzma | \
|
|
uImage lzma -M 0x434f4d42 -n '3.10(XID.0)b30' | iodata-mstc-header
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += iodata_wn-dx2033gr
|
|
|
|
define Device/iodata_wn-gx300gr
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 7616k
|
|
DEVICE_VENDOR := I-O DATA
|
|
DEVICE_MODEL := WN-GX300GR
|
|
DEVICE_PACKAGES := kmod-mt7603
|
|
endef
|
|
TARGET_DEVICES += iodata_wn-gx300gr
|
|
|
|
define Device/iodata_wnpr2600g
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
DEVICE_VENDOR := I-O DATA
|
|
DEVICE_MODEL := WNPR2600G
|
|
IMAGE_SIZE := 13952k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
|
|
elx-header 0104003a 8844A2D168B45A2D
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += iodata_wnpr2600g
|
|
|
|
define Device/iptime_a6ns-m
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16128k
|
|
UIMAGE_NAME := a6nm
|
|
DEVICE_VENDOR := ipTIME
|
|
DEVICE_MODEL := A6ns-M
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += iptime_a6ns-m
|
|
|
|
define Device/iptime_a8004t
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16128k
|
|
UIMAGE_NAME := a8004t
|
|
DEVICE_VENDOR := ipTIME
|
|
DEVICE_MODEL := A8004T
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware kmod-usb3
|
|
endef
|
|
TARGET_DEVICES += iptime_a8004t
|
|
|
|
define Device/jcg_jhr-ac876m
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16064k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | jcg-header 89.1
|
|
JCG_MAXSIZE := 16064k
|
|
DEVICE_VENDOR := JCG
|
|
DEVICE_MODEL := JHR-AC876M
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += jcg_jhr-ac876m
|
|
|
|
define Device/jcg_q20
|
|
$(Device/dsa-migration)
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
UBINIZE_OPTS := -E 5
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 91136k
|
|
IMAGES += factory.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
|
|
check-size
|
|
DEVICE_VENDOR := JCG
|
|
DEVICE_MODEL := Q20
|
|
DEVICE_PACKAGES := kmod-mt7915e uboot-envtools
|
|
endef
|
|
TARGET_DEVICES += jcg_q20
|
|
|
|
define Device/jcg_y2
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 16064k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | jcg-header 95.1
|
|
JCG_MAXSIZE := 16064k
|
|
DEVICE_VENDOR := JCG
|
|
DEVICE_MODEL := Y2
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware kmod-usb3
|
|
endef
|
|
TARGET_DEVICES += jcg_y2
|
|
|
|
define Device/lenovo_newifi-d1
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 32448k
|
|
DEVICE_VENDOR := Newifi
|
|
DEVICE_MODEL := D1
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-sdhci-mt7620 \
|
|
kmod-usb-ledtrig-usbport
|
|
SUPPORTED_DEVICES += newifi-d1
|
|
endef
|
|
TARGET_DEVICES += lenovo_newifi-d1
|
|
|
|
define Device/linksys_e5600
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 26624k
|
|
DEVICE_VENDOR := Linksys
|
|
DEVICE_MODEL := E5600
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
|
|
kmod-mt7663-firmware-sta uboot-envtools
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGES += factory.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | check-size | append-metadata
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
|
|
append-ubi | check-size | gemtek-trailer
|
|
endef
|
|
TARGET_DEVICES += linksys_e5600
|
|
|
|
define Device/linksys_ea7xxx
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 36864k
|
|
DEVICE_VENDOR := Linksys
|
|
DEVICE_PACKAGES := kmod-usb3 kmod-mt7615e kmod-mt7615-firmware \
|
|
uboot-envtools
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGES := sysupgrade.bin factory.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | check-size | append-metadata
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
|
|
append-ubi | check-size | linksys-image type=$$$$(LINKSYS_HWNAME)
|
|
endef
|
|
|
|
define Device/linksys_ea7300-v1
|
|
$(Device/linksys_ea7xxx)
|
|
DEVICE_MODEL := EA7300
|
|
DEVICE_VARIANT := v1
|
|
LINKSYS_HWNAME := EA7300
|
|
endef
|
|
TARGET_DEVICES += linksys_ea7300-v1
|
|
|
|
define Device/linksys_ea7300-v2
|
|
$(Device/linksys_ea7xxx)
|
|
DEVICE_MODEL := EA7300
|
|
DEVICE_VARIANT := v2
|
|
LINKSYS_HWNAME := EA7300v2
|
|
DEVICE_PACKAGES += kmod-mt7603
|
|
endef
|
|
TARGET_DEVICES += linksys_ea7300-v2
|
|
|
|
define Device/linksys_ea7500-v2
|
|
$(Device/linksys_ea7xxx)
|
|
DEVICE_MODEL := EA7500
|
|
DEVICE_VARIANT := v2
|
|
LINKSYS_HWNAME := EA7500v2
|
|
endef
|
|
TARGET_DEVICES += linksys_ea7500-v2
|
|
|
|
define Device/linksys_ea8100-v1
|
|
$(Device/linksys_ea7xxx)
|
|
DEVICE_MODEL := EA8100
|
|
DEVICE_VARIANT := v1
|
|
LINKSYS_HWNAME := EA8100
|
|
endef
|
|
TARGET_DEVICES += linksys_ea8100-v1
|
|
|
|
define Device/linksys_ea8100-v2
|
|
$(Device/linksys_ea7xxx)
|
|
DEVICE_MODEL := EA8100
|
|
DEVICE_VARIANT := v2
|
|
LINKSYS_HWNAME := EA8100v2
|
|
endef
|
|
TARGET_DEVICES += linksys_ea8100-v2
|
|
|
|
define Device/linksys_re6500
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_VENDOR := Linksys
|
|
DEVICE_MODEL := RE6500
|
|
DEVICE_PACKAGES := kmod-mt76x2
|
|
SUPPORTED_DEVICES += re6500
|
|
endef
|
|
TARGET_DEVICES += linksys_re6500
|
|
|
|
define Device/mediatek_ap-mt7621a-v60
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_VENDOR := Mediatek
|
|
DEVICE_MODEL := AP-MT7621A-V60 EVB
|
|
DEVICE_PACKAGES := kmod-usb3 kmod-sdhci-mt7620 kmod-sound-mt7620 -wpad-basic-wolfssl
|
|
endef
|
|
TARGET_DEVICES += mediatek_ap-mt7621a-v60
|
|
|
|
define Device/mediatek_mt7621-eval-board
|
|
$(Device/dsa-migration)
|
|
BLOCKSIZE := 64k
|
|
IMAGE_SIZE := 15104k
|
|
DEVICE_VENDOR := MediaTek
|
|
DEVICE_MODEL := MT7621 EVB
|
|
DEVICE_PACKAGES := -wpad-basic-wolfssl
|
|
SUPPORTED_DEVICES += mt7621
|
|
endef
|
|
TARGET_DEVICES += mediatek_mt7621-eval-board
|
|
|
|
define Device/MikroTik
|
|
$(Device/dsa-migration)
|
|
DEVICE_VENDOR := MikroTik
|
|
BLOCKSIZE := 64k
|
|
IMAGE_SIZE := 16128k
|
|
DEVICE_PACKAGES := kmod-usb3
|
|
KERNEL_NAME := vmlinuz
|
|
KERNEL := kernel-bin | append-dtb-elf
|
|
IMAGE/sysupgrade.bin := append-kernel | kernel2minor -s 1024 | \
|
|
pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | \
|
|
append-metadata
|
|
endef
|
|
|
|
define Device/mikrotik_routerboard-750gr3
|
|
$(Device/MikroTik)
|
|
DEVICE_MODEL := RouterBOARD 750Gr3
|
|
DEVICE_PACKAGES += -wpad-basic-wolfssl
|
|
SUPPORTED_DEVICES += mikrotik,rb750gr3
|
|
endef
|
|
TARGET_DEVICES += mikrotik_routerboard-750gr3
|
|
|
|
define Device/mikrotik_routerboard-760igs
|
|
$(Device/MikroTik)
|
|
DEVICE_MODEL := RouterBOARD 760iGS
|
|
DEVICE_PACKAGES += kmod-sfp -wpad-basic-wolfssl
|
|
endef
|
|
TARGET_DEVICES += mikrotik_routerboard-760igs
|
|
|
|
define Device/mikrotik_routerboard-m11g
|
|
$(Device/MikroTik)
|
|
DEVICE_MODEL := RouterBOARD M11G
|
|
DEVICE_PACKAGES := -wpad-basic-wolfssl
|
|
SUPPORTED_DEVICES += mikrotik,rbm11g
|
|
endef
|
|
TARGET_DEVICES += mikrotik_routerboard-m11g
|
|
|
|
define Device/mikrotik_routerboard-m33g
|
|
$(Device/MikroTik)
|
|
DEVICE_MODEL := RouterBOARD M33G
|
|
DEVICE_PACKAGES := -wpad-basic-wolfssl
|
|
SUPPORTED_DEVICES += mikrotik,rbm33g
|
|
endef
|
|
TARGET_DEVICES += mikrotik_routerboard-m33g
|
|
|
|
define Device/mqmaker_witi
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := MQmaker
|
|
DEVICE_MODEL := WiTi
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-mt76x2 kmod-sdhci-mt7620 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
SUPPORTED_DEVICES += witi mqmaker,witi-256m mqmaker,witi-512m
|
|
endef
|
|
TARGET_DEVICES += mqmaker_witi
|
|
|
|
define Device/mtc_wr1201
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 16000k
|
|
DEVICE_VENDOR := MTC
|
|
DEVICE_MODEL := Wireless Router WR1201
|
|
KERNEL_INITRAMFS := $(KERNEL_DTB) | uImage lzma -n 'WR1201_8_128'
|
|
DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt76x2 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += mtc_wr1201
|
|
|
|
define Device/netgear_ex6150
|
|
$(Device/dsa-migration)
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := EX6150
|
|
DEVICE_PACKAGES := kmod-mt76x2
|
|
NETGEAR_BOARD_ID := U12H318T00_NETGEAR
|
|
IMAGE_SIZE := 14848k
|
|
IMAGES += factory.chk
|
|
IMAGE/factory.chk := $$(sysupgrade_bin) | check-size | netgear-chk
|
|
endef
|
|
TARGET_DEVICES += netgear_ex6150
|
|
|
|
define Device/netgear_sercomm_nand
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_SIZE := 4096k
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGES += factory.img kernel.bin rootfs.bin
|
|
IMAGE/factory.img := pad-extra 2048k | append-kernel | pad-to 6144k | \
|
|
append-ubi | pad-to $$$$(BLOCKSIZE) | sercom-footer | pad-to 128 | \
|
|
zip $$$$(SERCOMM_HWNAME).bin | sercom-seal
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
IMAGE/kernel.bin := append-kernel
|
|
IMAGE/rootfs.bin := append-ubi | check-size
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-usb3 kmod-usb-ledtrig-usbport
|
|
endef
|
|
|
|
define Device/netgear_r6220
|
|
$(Device/netgear_sercomm_nand)
|
|
DEVICE_MODEL := R6220
|
|
SERCOMM_HWNAME := R6220
|
|
SERCOMM_HWID := AYA
|
|
SERCOMM_HWVER := A001
|
|
SERCOMM_SWVER := 0x0086
|
|
IMAGE_SIZE := 28672k
|
|
DEVICE_PACKAGES += kmod-mt76x2
|
|
SUPPORTED_DEVICES += r6220
|
|
endef
|
|
TARGET_DEVICES += netgear_r6220
|
|
|
|
|
|
define Device/netgear_r6260
|
|
$(Device/netgear_sercomm_nand)
|
|
DEVICE_MODEL := R6260
|
|
SERCOMM_HWNAME := R6260
|
|
SERCOMM_HWID := CHJ
|
|
SERCOMM_HWVER := A001
|
|
SERCOMM_SWVER := 0x0052
|
|
IMAGE_SIZE := 40960k
|
|
DEVICE_PACKAGES += kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += netgear_r6260
|
|
|
|
define Device/netgear_r6350
|
|
$(Device/netgear_sercomm_nand)
|
|
DEVICE_MODEL := R6350
|
|
SERCOMM_HWNAME := R6350
|
|
SERCOMM_HWID := CHJ
|
|
SERCOMM_HWVER := A001
|
|
SERCOMM_SWVER := 0x0052
|
|
IMAGE_SIZE := 40960k
|
|
DEVICE_PACKAGES += kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += netgear_r6350
|
|
|
|
define Device/netgear_r6700-v2
|
|
$(Device/netgear_sercomm_nand)
|
|
DEVICE_MODEL := R6700
|
|
DEVICE_VARIANT := v2
|
|
DEVICE_ALT0_VENDOR := NETGEAR
|
|
DEVICE_ALT0_MODEL := Nighthawk AC2400
|
|
DEVICE_ALT0_VARIANT := v1
|
|
DEVICE_ALT1_VENDOR := NETGEAR
|
|
DEVICE_ALT1_MODEL := R7200
|
|
DEVICE_ALT1_VARIANT := v1
|
|
SERCOMM_HWNAME := R6950
|
|
SERCOMM_HWID := BZV
|
|
SERCOMM_HWVER := A001
|
|
SERCOMM_SWVER := 0x1032
|
|
IMAGE_SIZE := 40960k
|
|
DEVICE_PACKAGES += kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += netgear_r6700-v2
|
|
|
|
define Device/netgear_r6800
|
|
$(Device/netgear_sercomm_nand)
|
|
DEVICE_MODEL := R6800
|
|
SERCOMM_HWNAME := R6950
|
|
SERCOMM_HWID := BZV
|
|
SERCOMM_HWVER := A001
|
|
SERCOMM_SWVER := 0x0062
|
|
IMAGE_SIZE := 40960k
|
|
DEVICE_PACKAGES += kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += netgear_r6800
|
|
|
|
define Device/netgear_r6850
|
|
$(Device/netgear_sercomm_nand)
|
|
DEVICE_MODEL := R6850
|
|
SERCOMM_HWNAME := R6850
|
|
SERCOMM_HWID := CHJ
|
|
SERCOMM_HWVER := A001
|
|
SERCOMM_SWVER := 0x0052
|
|
IMAGE_SIZE := 40960k
|
|
DEVICE_PACKAGES += kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += netgear_r6850
|
|
|
|
define Device/netgear_wac104
|
|
$(Device/netgear_sercomm_nand)
|
|
DEVICE_MODEL := WAC104
|
|
SERCOMM_HWNAME := WAC104
|
|
SERCOMM_HWID := CAY
|
|
SERCOMM_HWVER := A001
|
|
SERCOMM_SWVER := 0x0006
|
|
IMAGE_SIZE := 28672k
|
|
DEVICE_PACKAGES += kmod-mt76x2
|
|
endef
|
|
TARGET_DEVICES += netgear_wac104
|
|
|
|
define Device/netgear_wac124
|
|
$(Device/netgear_sercomm_nand)
|
|
DEVICE_MODEL := WAC124
|
|
SERCOMM_HWNAME := WAC124
|
|
SERCOMM_HWID := CTL
|
|
SERCOMM_HWVER := A003
|
|
SERCOMM_SWVER := 0x0402
|
|
IMAGE_SIZE := 40960k
|
|
DEVICE_PACKAGES += kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += netgear_wac124
|
|
|
|
define Device/netgear_wndr3700-v5
|
|
$(Device/dsa-migration)
|
|
$(Device/netgear_sercomm_nor)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 15232k
|
|
DEVICE_MODEL := WNDR3700
|
|
DEVICE_VARIANT := v5
|
|
SERCOMM_HWNAME := WNDR3700v5
|
|
SERCOMM_HWID := AYB
|
|
SERCOMM_HWVER := A001
|
|
SERCOMM_SWVER := 0x1054
|
|
SERCOMM_PAD := 320k
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
SUPPORTED_DEVICES += wndr3700v5
|
|
endef
|
|
TARGET_DEVICES += netgear_wndr3700-v5
|
|
|
|
define Device/netis_wf2881
|
|
$(Device/dsa-migration)
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
FILESYSTEMS := squashfs
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 129280k
|
|
UBINIZE_OPTS := -E 5
|
|
UIMAGE_NAME := WF2881_0.0.00
|
|
KERNEL_INITRAMFS := $(KERNEL_DTB) | netis-tail WF2881 | uImage lzma
|
|
IMAGES += factory.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
|
|
check-size
|
|
DEVICE_VENDOR := NETIS
|
|
DEVICE_MODEL := WF2881
|
|
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += netis_wf2881
|
|
|
|
define Device/phicomm_k2p
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 15744k
|
|
DEVICE_VENDOR := Phicomm
|
|
DEVICE_MODEL := K2P
|
|
DEVICE_ALT0_VENDOR := Phicomm
|
|
DEVICE_ALT0_MODEL := KE 2P
|
|
SUPPORTED_DEVICES += k2p
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += phicomm_k2p
|
|
|
|
define Device/planex_vr500
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 65216k
|
|
DEVICE_VENDOR := Planex
|
|
DEVICE_MODEL := VR500
|
|
DEVICE_PACKAGES := kmod-usb3 -wpad-basic-wolfssl
|
|
SUPPORTED_DEVICES += vr500
|
|
endef
|
|
TARGET_DEVICES += planex_vr500
|
|
|
|
define Device/samknows_whitebox-v8
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := SamKnows
|
|
DEVICE_MODEL := Whitebox 8
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport uboot-envtools
|
|
SUPPORTED_DEVICES += sk-wb8
|
|
endef
|
|
TARGET_DEVICES += samknows_whitebox-v8
|
|
|
|
define Device/sercomm_na502
|
|
$(Device/uimage-lzma-loader)
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 20480k
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
UBINIZE_OPTS := -E 5
|
|
KERNEL_SIZE := 4096k
|
|
DEVICE_VENDOR := SERCOMM
|
|
DEVICE_MODEL := NA502
|
|
DEVICE_PACKAGES := kmod-mt76x2 kmod-mt7603 kmod-usb3
|
|
endef
|
|
TARGET_DEVICES += sercomm_na502
|
|
|
|
define Device/storylink_sap-g3200u3
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_VENDOR := STORYLiNK
|
|
DEVICE_MODEL := SAP-G3200U3
|
|
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport
|
|
SUPPORTED_DEVICES += sap-g3200u3
|
|
endef
|
|
TARGET_DEVICES += storylink_sap-g3200u3
|
|
|
|
define Device/telco-electronics_x1
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Telco Electronics
|
|
DEVICE_MODEL := X1
|
|
DEVICE_PACKAGES := kmod-usb3 kmod-mt76
|
|
endef
|
|
TARGET_DEVICES += telco-electronics_x1
|
|
|
|
define Device/tenbay_t-mb5eu-v01
|
|
$(Device/dsa-migration)
|
|
DEVICE_VENDOR := Tenbay
|
|
DEVICE_MODEL := T-MB5EU-V01
|
|
DEVICE_DTS_CONFIG := config@1
|
|
DEVICE_PACKAGES += kmod-mt7915e kmod-usb3
|
|
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
|
IMAGE_SIZE := 15808k
|
|
SUPPORTED_DEVICES += mt7621-dm2-t-mb5eu-v01-nor
|
|
endef
|
|
TARGET_DEVICES += tenbay_t-mb5eu-v01
|
|
|
|
define Device/thunder_timecloud
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Thunder
|
|
DEVICE_MODEL := Timecloud
|
|
DEVICE_PACKAGES := kmod-usb3 -wpad-basic-wolfssl
|
|
SUPPORTED_DEVICES += timecloud
|
|
endef
|
|
TARGET_DEVICES += thunder_timecloud
|
|
|
|
define Device/totolink_a7000r
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16064k
|
|
UIMAGE_NAME := C8340R1C-9999
|
|
DEVICE_VENDOR := TOTOLINK
|
|
DEVICE_MODEL := A7000R
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += totolink_a7000r
|
|
|
|
define Device/totolink_x5000r
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16064k
|
|
UIMAGE_NAME := C8343R-9999
|
|
DEVICE_VENDOR := TOTOLINK
|
|
DEVICE_MODEL := X5000R
|
|
DEVICE_PACKAGES := kmod-mt7915e
|
|
endef
|
|
TARGET_DEVICES += totolink_x5000r
|
|
|
|
define Device/tplink_archer-a6-v3
|
|
$(Device/dsa-migration)
|
|
$(Device/tplink-safeloader)
|
|
DEVICE_MODEL := Archer A6
|
|
DEVICE_VARIANT := V3
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e \
|
|
kmod-mt7663-firmware-ap kmod-mt7663-firmware-sta
|
|
TPLINK_BOARD_ID := ARCHER-A6-V3
|
|
KERNEL := $(KERNEL_DTB) | uImage lzma
|
|
IMAGE_SIZE := 15744k
|
|
endef
|
|
TARGET_DEVICES += tplink_archer-a6-v3
|
|
|
|
define Device/tplink_archer-c6-v3
|
|
$(Device/dsa-migration)
|
|
$(Device/tplink-safeloader)
|
|
DEVICE_MODEL := Archer C6
|
|
DEVICE_VARIANT := V3
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e \
|
|
kmod-mt7663-firmware-ap kmod-mt7663-firmware-sta
|
|
TPLINK_BOARD_ID := ARCHER-C6-V3
|
|
KERNEL := $(KERNEL_DTB) | uImage lzma
|
|
IMAGE_SIZE := 15744k
|
|
endef
|
|
TARGET_DEVICES += tplink_archer-c6-v3
|
|
|
|
define Device/tplink_archer-c6u-v1
|
|
$(Device/dsa-migration)
|
|
$(Device/tplink-safeloader)
|
|
DEVICE_MODEL := Archer C6U
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES := kmod-mt7603 \
|
|
kmod-mt7615e kmod-mt7663-firmware-ap \
|
|
kmod-usb3 kmod-usb-ledtrig-usbport
|
|
KERNEL := $(KERNEL_DTB) | uImage lzma
|
|
TPLINK_BOARD_ID := ARCHER-C6U-V1
|
|
IMAGE_SIZE := 15744k
|
|
endef
|
|
TARGET_DEVICES += tplink_archer-c6u-v1
|
|
|
|
define Device/tplink_eap235-wall-v1
|
|
$(Device/dsa-migration)
|
|
$(Device/tplink-safeloader)
|
|
DEVICE_MODEL := EAP235-Wall
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap
|
|
TPLINK_BOARD_ID := EAP235-WALL-V1
|
|
IMAGE_SIZE := 13440k
|
|
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory | \
|
|
pad-extra 128
|
|
endef
|
|
TARGET_DEVICES += tplink_eap235-wall-v1
|
|
|
|
define Device/tplink_re350-v1
|
|
$(Device/dsa-migration)
|
|
$(Device/tplink-safeloader)
|
|
DEVICE_MODEL := RE350
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2
|
|
TPLINK_BOARD_ID := RE350-V1
|
|
IMAGE_SIZE := 6016k
|
|
SUPPORTED_DEVICES += re350-v1
|
|
endef
|
|
TARGET_DEVICES += tplink_re350-v1
|
|
|
|
define Device/tplink_re500-v1
|
|
$(Device/dsa-migration)
|
|
$(Device/tplink-safeloader)
|
|
DEVICE_MODEL := RE500
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
|
|
TPLINK_BOARD_ID := RE500-V1
|
|
IMAGE_SIZE := 14208k
|
|
endef
|
|
TARGET_DEVICES += tplink_re500-v1
|
|
|
|
define Device/tplink_re650-v1
|
|
$(Device/dsa-migration)
|
|
$(Device/tplink-safeloader)
|
|
DEVICE_MODEL := RE650
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
|
|
TPLINK_BOARD_ID := RE650-V1
|
|
IMAGE_SIZE := 14208k
|
|
endef
|
|
TARGET_DEVICES += tplink_re650-v1
|
|
|
|
define Device/ubnt_edgerouter_common
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
DEVICE_VENDOR := Ubiquiti
|
|
IMAGE_SIZE := 256768k
|
|
FILESYSTEMS := squashfs
|
|
KERNEL_SIZE := 3145728
|
|
KERNEL_INITRAMFS := $$(KERNEL) | \
|
|
ubnt-erx-factory-image $(KDIR)/tmp/$$(KERNEL_INITRAMFS_PREFIX)-factory.tar
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
DEVICE_PACKAGES += -wpad-basic-wolfssl
|
|
endef
|
|
|
|
define Device/ubnt_edgerouter-x
|
|
$(Device/ubnt_edgerouter_common)
|
|
DEVICE_MODEL := EdgeRouter X
|
|
SUPPORTED_DEVICES += ubnt-erx ubiquiti,edgerouterx
|
|
endef
|
|
TARGET_DEVICES += ubnt_edgerouter-x
|
|
|
|
define Device/ubnt_edgerouter-x-sfp
|
|
$(Device/ubnt_edgerouter_common)
|
|
DEVICE_MODEL := EdgeRouter X SFP
|
|
DEVICE_PACKAGES += kmod-i2c-algo-pca kmod-gpio-pca953x kmod-sfp
|
|
SUPPORTED_DEVICES += ubnt-erx-sfp ubiquiti,edgerouterx-sfp
|
|
endef
|
|
TARGET_DEVICES += ubnt_edgerouter-x-sfp
|
|
|
|
define Device/ubnt_unifi-6-lite
|
|
$(Device/dsa-migration)
|
|
DEVICE_VENDOR := Ubiquiti
|
|
DEVICE_MODEL := UniFi 6 Lite
|
|
DEVICE_DTS_CONFIG := config@1
|
|
DEVICE_PACKAGES += kmod-mt7603 kmod-mt7915e
|
|
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
|
IMAGE_SIZE := 15424k
|
|
endef
|
|
TARGET_DEVICES += ubnt_unifi-6-lite
|
|
|
|
define Device/ubnt_unifi-nanohd
|
|
$(Device/dsa-migration)
|
|
DEVICE_VENDOR := Ubiquiti
|
|
DEVICE_MODEL := UniFi nanoHD
|
|
DEVICE_PACKAGES += kmod-mt7603 kmod-mt7615e kmod-mt7615-firmware
|
|
IMAGE_SIZE := 15552k
|
|
endef
|
|
TARGET_DEVICES += ubnt_unifi-nanohd
|
|
|
|
define Device/unielec_u7621-01-16m
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := UniElec
|
|
DEVICE_MODEL := U7621-01
|
|
DEVICE_VARIANT := 16M
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3
|
|
endef
|
|
TARGET_DEVICES += unielec_u7621-01-16m
|
|
|
|
define Device/unielec_u7621-06-16m
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := UniElec
|
|
DEVICE_MODEL := U7621-06
|
|
DEVICE_VARIANT := 16M
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-usb3 -wpad-basic-wolfssl
|
|
SUPPORTED_DEVICES += u7621-06-256M-16M unielec,u7621-06-256m-16m
|
|
endef
|
|
TARGET_DEVICES += unielec_u7621-06-16m
|
|
|
|
define Device/unielec_u7621-06-64m
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 65216k
|
|
DEVICE_VENDOR := UniElec
|
|
DEVICE_MODEL := U7621-06
|
|
DEVICE_VARIANT := 64M
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-usb3 -wpad-basic-wolfssl
|
|
SUPPORTED_DEVICES += unielec,u7621-06-512m-64m
|
|
endef
|
|
TARGET_DEVICES += unielec_u7621-06-64m
|
|
|
|
define Device/wavlink_wl-wn531a6
|
|
$(Device/dsa-migration)
|
|
DEVICE_VENDOR := Wavlink
|
|
DEVICE_MODEL := WL-WN531A6
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7615-firmware kmod-usb3
|
|
IMAGE_SIZE := 15040k
|
|
endef
|
|
TARGET_DEVICES += wavlink_wl-wn531a6
|
|
|
|
define Device/wevo_11acnas
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 16064k
|
|
UIMAGE_NAME := 11AC-NAS-Router(0.0.0)
|
|
DEVICE_VENDOR := WeVO
|
|
DEVICE_MODEL := 11AC NAS Router
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
SUPPORTED_DEVICES += 11acnas
|
|
endef
|
|
TARGET_DEVICES += wevo_11acnas
|
|
|
|
define Device/wevo_w2914ns-v2
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 16064k
|
|
UIMAGE_NAME := W2914NS-V2(0.0.0)
|
|
DEVICE_VENDOR := WeVO
|
|
DEVICE_MODEL := W2914NS
|
|
DEVICE_VARIANT := v2
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
SUPPORTED_DEVICES += w2914nsv2
|
|
endef
|
|
TARGET_DEVICES += wevo_w2914ns-v2
|
|
|
|
define Device/winstars_ws-wn583a6
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_VENDOR := Winstars
|
|
DEVICE_MODEL := WS-WN583A6
|
|
DEVICE_ALT0_VENDOR := Gemeita
|
|
DEVICE_ALT0_MODEL := AC2100
|
|
KERNEL_INITRAMFS_SUFFIX := -WN583A6$$(KERNEL_SUFFIX)
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += winstars_ws-wn583a6
|
|
|
|
define Device/xiaomi_nand_separate
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
DEVICE_VENDOR := Xiaomi
|
|
DEVICE_PACKAGES := uboot-envtools
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_SIZE := 4096k
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGES += kernel1.bin rootfs0.bin
|
|
IMAGE/kernel1.bin := append-kernel
|
|
IMAGE/rootfs0.bin := append-ubi | check-size
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
|
|
define Device/xiaomi_mi-router-3g
|
|
$(Device/xiaomi_nand_separate)
|
|
DEVICE_MODEL := Mi Router 3G
|
|
IMAGE_SIZE := 124416k
|
|
DEVICE_PACKAGES += kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
SUPPORTED_DEVICES += R3G mir3g xiaomi,mir3g
|
|
endef
|
|
TARGET_DEVICES += xiaomi_mi-router-3g
|
|
|
|
define Device/xiaomi_mi-router-3g-v2
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 14848k
|
|
DEVICE_VENDOR := Xiaomi
|
|
DEVICE_MODEL := Mi Router 3G
|
|
DEVICE_VARIANT := v2
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2
|
|
SUPPORTED_DEVICES += xiaomi,mir3g-v2
|
|
endef
|
|
TARGET_DEVICES += xiaomi_mi-router-3g-v2
|
|
|
|
define Device/xiaomi_mi-router-3-pro
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_SIZE:= 4096k
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGE_SIZE := 255488k
|
|
DEVICE_VENDOR := Xiaomi
|
|
DEVICE_MODEL := Mi Router 3 Pro
|
|
IMAGES += factory.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
|
|
check-size
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport uboot-envtools
|
|
SUPPORTED_DEVICES += xiaomi,mir3p
|
|
endef
|
|
TARGET_DEVICES += xiaomi_mi-router-3-pro
|
|
|
|
define Device/xiaomi_mi-router-4
|
|
$(Device/xiaomi_nand_separate)
|
|
DEVICE_MODEL := Mi Router 4
|
|
IMAGE_SIZE := 124416k
|
|
DEVICE_PACKAGES += kmod-mt7603 kmod-mt76x2
|
|
endef
|
|
TARGET_DEVICES += xiaomi_mi-router-4
|
|
|
|
define Device/xiaomi_mi-router-4a-gigabit
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 14848k
|
|
DEVICE_VENDOR := Xiaomi
|
|
DEVICE_MODEL := Mi Router 4A
|
|
DEVICE_VARIANT := Gigabit Edition
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2
|
|
endef
|
|
TARGET_DEVICES += xiaomi_mi-router-4a-gigabit
|
|
|
|
define Device/xiaomi_mi-router-ac2100
|
|
$(Device/xiaomi_nand_separate)
|
|
DEVICE_MODEL := Mi Router AC2100
|
|
IMAGE_SIZE := 120320k
|
|
DEVICE_PACKAGES += kmod-mt7603 kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += xiaomi_mi-router-ac2100
|
|
|
|
define Device/xiaomi_redmi-router-ac2100
|
|
$(Device/xiaomi_nand_separate)
|
|
DEVICE_MODEL := Redmi Router AC2100
|
|
IMAGE_SIZE := 120320k
|
|
DEVICE_PACKAGES += kmod-mt7603 kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += xiaomi_redmi-router-ac2100
|
|
|
|
define Device/xiaoyu_xy-c5
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 32448k
|
|
DEVICE_VENDOR := XiaoYu
|
|
DEVICE_MODEL := XY-C5
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-usb3 -wpad-basic-wolfssl
|
|
endef
|
|
TARGET_DEVICES += xiaoyu_xy-c5
|
|
|
|
define Device/xzwifi_creativebox-v1
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 32448k
|
|
DEVICE_VENDOR := CreativeBox
|
|
DEVICE_MODEL := v1
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-mt7603 kmod-mt76x2 kmod-sdhci-mt7620 \
|
|
kmod-usb3 -wpad-basic-wolfssl
|
|
endef
|
|
TARGET_DEVICES += xzwifi_creativebox-v1
|
|
|
|
define Device/youhua_wr1200js
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := YouHua
|
|
DEVICE_MODEL := WR1200JS
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += youhua_wr1200js
|
|
|
|
define Device/youku_yk-l2
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Youku
|
|
DEVICE_MODEL := YK-L2
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += youku_yk-l2
|
|
|
|
define Device/zbtlink_zbt-we1326
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Zbtlink
|
|
DEVICE_MODEL := ZBT-WE1326
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-sdhci-mt7620
|
|
SUPPORTED_DEVICES += zbt-we1326
|
|
endef
|
|
TARGET_DEVICES += zbtlink_zbt-we1326
|
|
|
|
define Device/zbtlink_zbt-we3526
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Zbtlink
|
|
DEVICE_MODEL := ZBT-WE3526
|
|
DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += zbtlink_zbt-we3526
|
|
|
|
define Device/zbtlink_zbt-wg2626
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Zbtlink
|
|
DEVICE_MODEL := ZBT-WG2626
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-mt76x2 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
SUPPORTED_DEVICES += zbt-wg2626
|
|
endef
|
|
TARGET_DEVICES += zbtlink_zbt-wg2626
|
|
|
|
define Device/zbtlink_zbt-wg3526-16m
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Zbtlink
|
|
DEVICE_MODEL := ZBT-WG3526
|
|
DEVICE_VARIANT := 16M
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-mt7603 kmod-mt76x2 \
|
|
kmod-usb3 kmod-usb-ledtrig-usbport
|
|
SUPPORTED_DEVICES += zbt-wg3526 zbt-wg3526-16M
|
|
endef
|
|
TARGET_DEVICES += zbtlink_zbt-wg3526-16m
|
|
|
|
define Device/zbtlink_zbt-wg3526-32m
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 32448k
|
|
DEVICE_VENDOR := Zbtlink
|
|
DEVICE_MODEL := ZBT-WG3526
|
|
DEVICE_VARIANT := 32M
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-mt7603 kmod-mt76x2 \
|
|
kmod-usb3 kmod-usb-ledtrig-usbport
|
|
SUPPORTED_DEVICES += ac1200pro zbt-wg3526-32M
|
|
endef
|
|
TARGET_DEVICES += zbtlink_zbt-wg3526-32m
|
|
|
|
define Device/zio_freezio
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := ZIO
|
|
DEVICE_MODEL := FREEZIO
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += zio_freezio
|
|
|
|
define Device/zyxel_nr7101
|
|
$(Device/dsa-migration)
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
UBINIZE_OPTS := -E 5
|
|
DEVICE_VENDOR := ZyXEL
|
|
DEVICE_MODEL := NR7101
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-usb3 uboot-envtools kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
|
|
KERNEL := $(KERNEL_DTB) | uImage lzma | zytrx-header $$(DEVICE_MODEL) $$(VERSION_DIST)-$$(REVISION)
|
|
KERNEL_INITRAMFS := $(KERNEL_DTB) | uImage lzma | zytrx-header $$(DEVICE_MODEL) 9.99(ABUV.9)$$(VERSION_DIST)-recovery
|
|
KERNEL_INITRAMFS_SUFFIX := -recovery.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += zyxel_nr7101
|
|
|
|
define Device/zyxel_wap6805
|
|
$(Device/dsa-migration)
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_SIZE := 4096k
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGE_SIZE := 32448k
|
|
DEVICE_VENDOR := ZyXEL
|
|
DEVICE_MODEL := WAP6805
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7621-qtn-rgmii
|
|
KERNEL := $(KERNEL_DTB) | uImage lzma | uimage-padhdr 160
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += zyxel_wap6805
|