Hauke Mehrtens b7ee0786b5 realtek: Fix failsafe mode ... The RTL8380-RTL9300 switches only forward packets when VLAN ID 1 is configured. Do not use the standard failsafe configuration for DSA accessing the default port directly, but configure a switch on the lan1 interface instead. This will add the VLAN ID 1 configuration to the switch: $ bridge vlan show port vlan-id lan1 1 PVID Egress Untagged switch 1 PVID Egress Untagged Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>		2021-06-22 23:23:00 +02:00
..
base-files	realtek: Fix failsafe mode	2021-06-22 23:23:00 +02:00
dts	realtek: add support for INABA Abaniact AML2-17GP	2021-05-07 07:05:16 +02:00
files/firmware/rtl838x_phy
files-5.4	realtek: Fix buffer length calculation on RTL8380 with CRC offload	2021-06-22 23:23:00 +02:00
generic
image	realtek: add support for INABA Abaniact AML2-17GP	2021-05-07 07:05:16 +02:00
patches-5.4	kernel: bump 5.4 to 5.4.116	2021-05-07 07:05:16 +02:00
profiles	target: use SPDX license identifiers on Makefiles	2021-02-10 15:47:18 +01:00
config-5.4	treewide: switch the timer frequency to 100 Hz	2021-04-21 10:31:10 +01:00
Makefile	target: use SPDX license identifiers on Makefiles	2021-02-10 15:47:18 +01:00