An opensource OpenWrt variant for mainland China users.

Go to file

INAGAKI Hiroshi 890a6b66cb ramips: add support for ELECOM WRC-1750GST2 ELECOM WRC-1750GST2 is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 256 MiB (NT5CC128M16JR-EK) - Flash : SPI-NOR 32 MiB (MX25L25645GMI-08G) - WLAN : 2.4/5 GHz 3T3R (2x MediaTek MT7615) - Ethernet : 10/100/1000 Mbps x5 - Switch : MediaTek MT7530 (SoC) - LEDs/Keys : 4x/6x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J4: 3.3V, GND, TX, RX, from ethernet port side - 57600n8 - Power : 12 VDC, 1.5 A Flash instruction using factory image: 1. Boot WRC-1750GST2 normally with "Router" mode 2. Access to "http://192.168.2.1/" and open firmware update page ("ファームウェア更新") 3. Select the OpenWrt factory image and click apply ("適用") button 4. Wait ~120 seconds to complete flashing MAC addresses: LAN : 04:AB:18:xx:xx:23 (Factory, 0xE000 (hex)) WAN : 04:AB:18:xx:xx:24 (Factory, 0xE006 (hex)) 2.4GHz : 04:AB:18:xx:xx:25 (Factory, 0x4 (hex)) 5GHz : 04:AB:18:xx:xx:26 (Factory, 0x8004 (hex)) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>		2021-03-23 11:20:58 +08:00
config	treewide: fix spelling 'seperate' -> 'separate'	2021-03-02 22:26:41 +08:00
include	Merge Mainline	2021-03-23 09:29:58 +08:00
LICENSES	LICENSE: sync with upstream	2021-02-16 14:19:09 +08:00
package	Merge Mainline	2021-03-23 09:29:58 +08:00
scripts	Merge Mainline	2021-03-23 09:29:58 +08:00
target	ramips: add support for ELECOM WRC-1750GST2	2021-03-23 11:20:58 +08:00
toolchain	Merge Mainline	2021-03-22 22:06:22 +08:00
tools	Merge Mainline	2021-03-22 22:06:22 +08:00
.gitattributes	fix permisson	2019-08-16 15:09:42 +08:00
.gitignore	build: improve ccache support	2021-01-02 12:08:17 +08:00
BSDmakefile	build: use SPDX license tags	2021-02-06 12:07:10 +08:00
Config.in	build: use SPDX license tags	2021-02-06 12:07:10 +08:00
CONTRIBUTED.md	Merge Mainline	2021-03-23 09:29:58 +08:00
COPYING	LICENSE: sync with upstream	2021-02-16 14:19:09 +08:00
feeds.conf.default	Project ImmortalWrt: update feed urls	2021-02-06 16:53:05 +08:00
Makefile	Revert "build: replace which with Bash command built-in"	2021-03-04 12:10:58 +08:00
README.md	Merge Mainline	2021-02-16 14:50:17 +08:00
rules.mk	Mostly revert "build: add support for fixing up library soname"	2021-02-16 12:13:08 +08:00

README.md

PROJECT IMMORTALWRT

The Core Source Code of ImmortalWrt

Welcome to our Telegram Group: @ctcgfw_openwrt_discuss.

How to make it

Minimum requirements

Linux with case sensitive
2G DDR2 RAM
2 CPU Cores (AMD64, 1.4Ghz)
25G disk space left
Has access to both ChinaNet & Internet

Install the necessary packages (for Ubuntu user)

sudo apt-get update -y
sudo apt-get full-upgrade -y
sudo apt-get install -y build-essential asciidoc binutils bzip2 gawk gettext git libncurses5-dev libz-dev patch unzip zlib1g-dev lib32gcc1 libc6-dev-i386 subversion flex uglifyjs git-core gcc-multilib g++-multilib p7zip p7zip-full msmtp libssl-dev texinfo libreadline-dev libglib2.0-dev xmlto qemu-utils upx libelf-dev autoconf automake libtool autopoint ccache curl wget vim nano python python3 python-pip python3-pip python-ply python3-ply haveged lrzsz device-tree-compiler scons antlr3 gperf intltool rsync

For mainland China & Ubuntu(16.04+) user, you may run the following command to setup quickly:

sudo bash -c "bash <(curl -s https://build-scripts.project-openwrt.eu.org/init_build_environment.sh)"

Clone the source

git clone -b openwrt-18.06-k5.4 --single-branch https://github.com/immortalwrt/immortalwrt && cd immortalwrt
./scripts/feeds update -a && ./scripts/feeds install -a

Configure your firmware

make menuconfig

Make it

make -j$(nproc) V=s

Tips

You'd better not use root to make it, or you may be not able to use.
Default login address: 192.168.1.1, username is root and password is password.