immortalwrt/target/linux/ath79
Adrian Schmutzler e8d4ff8e1a
ath79: add support for TP-Link TL-WDR7500 v3
This ports support for the TP-Link TL-WDR7500 v3 from ar71xx to ath79.

The basic features appear to be identical to the Archer C7 v1, however
it has the (supported) QCA9880-BR4A chip of the C7 v2.

Specifications:

  SoC:       QCA9558
  CPU:       720 MHz
  Flash:     8 MiB
  RAM:       128 MiB
  WLAN:      2.4 GHz b/g/n, 5 GHz a/n/ac
             Qualcomm Atheros QCA9880-BR4A
  Ethernet:  5x Gbit ports
  USB:       2x 2.0 ports

Flashing instructions:

Upload the factory image via the OEM firmware GUI.

TFTP recovery appears to be available as well.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-12-05 17:20:46 +08:00
..
base-files/etc/hotplug.d/ieee80211 ath79: add WiFi migration for AR913x 2020-09-29 11:23:24 +08:00
dts ath79: add support for TP-Link TL-WDR7500 v3 2020-12-05 17:20:46 +08:00
files ath79: add QCA956x SERDES init workaround 2020-11-24 23:27:08 +08:00
generic ath79: add support for TP-Link TL-WDR7500 v3 2020-12-05 17:20:46 +08:00
image ath79: add support for TP-Link TL-WDR7500 v3 2020-12-05 17:20:46 +08:00
mikrotik ath79: move the squashfs feature to the parent target 2020-11-24 23:20:48 +08:00
nand ath79: move the squashfs feature to the parent target 2020-11-24 23:20:48 +08:00
patches-5.4 kernel: clean up patch fuzz 2020-11-28 19:05:06 +08:00
tiny ath79: move the squashfs feature to the parent target 2020-11-24 23:20:48 +08:00
config-5.4 ath79: enable elf mtd splitter 2020-09-10 17:28:10 +08:00
Makefile ath79: move the squashfs feature to the parent target 2020-11-24 23:20:48 +08:00
modules.mk