fish/immortalwrt
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
An opensource OpenWrt variant for mainland China users.
5,914 Commits 6 Branches 17 Tags 782 MiB
C 61.6%
Makefile 19.3%
Shell 6.9%
Roff 6.7%
Perl 2.5%
Other 2.8%
8bbf42f174
Go to file
Willem van den Akker 8bbf42f174 lantiq: set correct gphy pins for Zyxel P-2812 
This fixes the gphy LED pins for Zyxel P-2812 devices. The have
been accidentally altered during a tidy-up operation (see Fixes:
below).

No ports were available, dmesg reported:

[ 0.658577] pinctrl-xway 1e100b10.pinmux: pin io5 already requested by
            1e100bb0.stp; cannot claim for 1e108000.eth
[ 0.667566] pinctrl-xway 1e100b10.pinmux: pin-5 (1e108000.eth) status -22
[ 0.685238] lantiq,xrx200-net 1e108000.eth: Error applying setting,
            reverse things back
[ 0.693270] lantiq,xrx200-net: probe of 1e108000.eth failed with error -22

Fixes: FS#3188
Fixes: 660200e53d ("lantiq: dts: assign the GPHY LED pins to the
Ethernet controller node")

Suggested-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Willem van den Akker <wvdakker@wilsoft.nl>
[commit message facelift]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-12 12:30:01 +08:00
config Merge Mainline 2020-06-28 18:16:21 +08:00
include kernel: bump 5.4 to 5.4.51 2020-07-10 22:46:01 +08:00
package mediatek: add SD card image creation for Banana Pi R2 2020-07-09 12:27:01 +08:00
scripts Merge Mainline 2020-07-08 12:15:03 +08:00
target lantiq: set correct gphy pins for Zyxel P-2812 2020-07-12 12:30:01 +08:00
toolchain toolchain: remove gcc libssp and use libc variant 2020-06-18 08:06:20 +08:00
tools firmware-utils/ptgen: allow explicit placement of partitions 2020-07-09 12:22:03 +08:00
.gitattributes fix permisson 2019-08-16 15:09:42 +08:00
.gitignore gitignore: ignore patches in root directory 2020-02-25 15:39:25 +08:00
BSDmakefile packages: apply usign padding workarounds to package indexes if needed 2019-08-16 14:48:02 +08:00
Config.in packages: apply usign padding workarounds to package indexes if needed 2019-08-16 14:48:02 +08:00
CONTRIBUTED.md Update CONTRIBUTED.md 2020-06-26 00:04:07 +08:00
feeds.conf.default feeds: switch to github official repo 2020-06-20 12:06:05 +08:00
LICENSE packages: apply usign padding workarounds to package indexes if needed 2019-08-16 14:48:02 +08:00
Makefile build: fix host menu config targets using ncurses 2020-05-23 20:15:09 +08:00
README.md Merge Mainline 2020-06-04 18:38:04 +08:00
rules.mk target/imagebuilder: use multi-thread support for xz compression 2020-03-27 18:40:33 +08:00

README.md

PROJECT OPENWRT

The Source Code of OpenWrt-Lean Modified by CTCGFW

Welcome to our Telegram Group: @ctcgfw_openwrt_discuss.

How to make it

Minimum requirements

Linux with case sensitive
2G DDR2 RAM
2 CPU Cores (AMD64, 1.4Ghz)
25G disk space left
Has access to both ChinaNet & Internet

Install the necessary packages (for Ubuntu user)

sudo apt-get update -y
sudo apt-get full-upgrade -y
sudo apt-get install -y build-essential asciidoc binutils bzip2 gawk gettext git libncurses5-dev libz-dev patch unzip zlib1g-dev lib32gcc1 libc6-dev-i386 subversion flex uglifyjs git-core gcc-multilib g++-multilib p7zip p7zip-full msmtp libssl-dev texinfo libreadline-dev libglib2.0-dev xmlto qemu-utils upx libelf-dev autoconf automake libtool autopoint ccache curl wget vim nano python python3 python-pip python3-pip python-ply python3-ply haveged lrzsz device-tree-compiler scons antlr3 gperf intltool

For mainland China & Ubuntu(16.04+) user, you may run the following command to setup quickly:

sudo bash -c "bash <(curl -s https://build-scripts.project-openwrt.eu.org/init_build_environment.sh)"

Clone the source

git clone -b 18.06-kernel5.4 --single-branch https://github.com/project-openwrt/openwrt && cd openwrt
./scripts/feeds update -a && ./scripts/feeds install -a

For developer, you may use openwrt-18.06-dev branch instead of openwrt-18.06.

Configure your firmware

make menuconfig

Make it

make -j1 V=s

Tips

You'd better not use root to make it, or you may be not able to use.
Default login address: 192.168.1.1, username is root and password is password.

Contributed

See CONTRIBUTED.md.

License

GNU General Public License v3.0.