An opensource OpenWrt variant for mainland China users.

Go to file

Michael Mohr 9062cfcba5 realtek: refactor the Netgear GS110TPP v1 device tree Move most of the GS110TPP v1 device tree into a dtsi so that it can be shared with the GS108T v3. Additionally: * Use macros to simplify the ethernet and switch definitions * Zero-pad the offsets and sizes in the partition map to 8 digits each The spi-max-frequency value has been changed from 10MHz to 50MHz based on an analysis of the relevant datasheets. The current driver doesn't use this property, as the clock speed is fixed. However, it's required for this type of DT node, so that's why it's present here. The firmware partition has been split in half, since this is how the stock firmware uses it. This can be used to easily revert to a stock firmware if one is written to the second image area. Signed-off-by: Michael Mohr <akihana@gmail.com>		2021-02-13 12:07:04 +08:00
config	Merge Mainline	2021-02-06 18:50:03 +08:00
include	kernel: bump 5.4 to 5.4.97	2021-02-12 12:05:11 +08:00
package	ltq-ptm: Update VR9 PTM firmware	2021-02-13 12:05:10 +08:00
scripts	Merge Mainline	2021-02-10 12:28:03 +08:00
target	realtek: refactor the Netgear GS110TPP v1 device tree	2021-02-13 12:07:04 +08:00
toolchain	Merge Mainline	2021-02-10 12:28:03 +08:00
tools	Merge Mainline	2021-02-10 12:28:03 +08:00
.gitattributes	fix permisson	2019-08-16 15:09:42 +08:00
.gitignore	build: improve ccache support	2021-01-02 12:08:17 +08:00
BSDmakefile	build: use SPDX license tags	2021-02-06 12:07:10 +08:00
Config.in	build: use SPDX license tags	2021-02-06 12:07:10 +08:00
CONTRIBUTED.md	Merge Mainline	2020-12-25 19:25:12 +08:00
feeds.conf.default	Project ImmortalWrt: update feed urls	2021-02-06 16:53:05 +08:00
LICENSE	packages: apply usign padding workarounds to package indexes if needed	2019-08-16 14:48:02 +08:00
Makefile	build: use SPDX license tags	2021-02-06 12:07:10 +08:00
README.md	Merge Mainline	2021-02-06 18:50:03 +08:00
rules.mk	build: use SPDX license tags	2021-02-06 12:07:10 +08:00

README.md

PROJECT IMMORTALWRT

The Core Source Code of ImmortalWrt

Welcome to our Telegram Group: @ctcgfw_openwrt_discuss.

How to make it

Minimum requirements

Linux with case sensitive
2G DDR2 RAM
2 CPU Cores (AMD64, 1.4Ghz)
25G disk space left
Has access to both ChinaNet & Internet

Install the necessary packages (for Ubuntu user)

sudo apt-get update -y
sudo apt-get full-upgrade -y
sudo apt-get install -y build-essential asciidoc binutils bzip2 gawk gettext git libncurses5-dev libz-dev patch unzip zlib1g-dev lib32gcc1 libc6-dev-i386 subversion flex uglifyjs git-core gcc-multilib g++-multilib p7zip p7zip-full msmtp libssl-dev texinfo libreadline-dev libglib2.0-dev xmlto qemu-utils upx libelf-dev autoconf automake libtool autopoint ccache curl wget vim nano python python3 python-pip python3-pip python-ply python3-ply haveged lrzsz device-tree-compiler scons antlr3 gperf intltool rsync

For mainland China & Ubuntu(16.04+) user, you may run the following command to setup quickly:

sudo bash -c "bash <(curl -s https://build-scripts.project-openwrt.eu.org/init_build_environment.sh)"

Clone the source

git clone -b openwrt-18.06-k5.4 --single-branch https://github.com/immortalwrt/immortalwrt && cd immortalwrt
./scripts/feeds update -a && ./scripts/feeds install -a

Configure your firmware

make menuconfig

Make it

make -j$(nproc) V=s

Tips

You'd better not use root to make it, or you may be not able to use.
Default login address: 192.168.1.1, username is root and password is password.