Nick McKinney be3375bf9d ramips: add support for Linksys EA6350 v4 ... Specifications: - SoC: MT7621DAT (880MHz, 2 Cores) - RAM: 128 MB - Flash: 128 MB NAND - Ethernet: 5x 1GiE MT7530 - WiFi: MT7603/MT7613 - USB: 1x USB 3.0 This is another MT7621 device, very similar to other Linksys EA7300 series devices. Installation: Upload the generated factory.bin image via the stock web firmware updater. Reverting to factory firmware: Like other EA7300 devices, this device has an A/B router configuration to prevent bricking. Hard-resetting this device three (3) times will put the device in failsafe (default) mode. At this point, flash the OEM image to itself and reboot. This puts the router back into the 'B' image and allows for a firmware upgrade. Troubleshooting: If the firmware will not boot, first restore the factory as described above. This will then allow the factory.bin update to be applied properly. Signed-off-by: Nick McKinney <nick@ndmckinney.net>		2022-01-13 12:38:02 +08:00
..
lzma-loader	ramips: sync official source code	2020-09-12 15:01:12 +08:00
common-tp-link.mk	treewide: call check-size before append-metadata	2021-07-11 12:13:31 +08:00
Makefile	ramips: mt7620: use OKLI loader with Jboot devices	2021-12-26 23:53:52 +08:00
mt76x8.mk	ramips: add support for Joowin WR758AC V1 and V2	2022-01-13 12:35:43 +08:00
mt7620.mk	mt7620: disable build for wn-ac1167gr	2022-01-06 10:49:16 +08:00
mt7621.mk	ramips: add support for Linksys EA6350 v4	2022-01-13 12:38:02 +08:00
rt288x.mk	ramips: sync official source code	2020-09-12 15:01:12 +08:00
rt305x.mk	ramips: use lzma-loader on D-Link DIR-615 H1	2021-11-22 00:07:53 +08:00
rt3883.mk	ramips: provide default BLOCKSIZE for Device/seama	2021-08-30 12:16:19 +08:00