Hauke Mehrtens ed0dc1c97e b53: hardcode reset GPIO for Linksys WRT300N 1.1 ... According to the thread https://forum.openwrt.org/viewtopic.php?id=48281 b53 uses GPIO 7: [ 4.470000] b53_common: [DBG] b53_switch_reset_gpio using 7 and causes device to self-reboot. GPIO 8 was found in CFE boot log: "Reset switch via GPIO 8 ..." Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 41526		2014-07-06 11:40:51 +00:00
..
b53	b53: hardcode reset GPIO for Linksys WRT300N 1.1	2014-07-06 11:40:51 +00:00
adm6996.c	adm6996: the GPIO interface for the adm6996l does not support switch statistics.	2014-07-05 12:13:56 +00:00
adm6996.h	linux/generic: add MIB counters and port status to ADM6996 switch	2014-04-22 08:08:02 +00:00
ar8216.c	Revert "ar71xx: Fix tagged+untagged operation on AR8327N (#12181)"	2014-05-24 17:04:12 +00:00
ar8216.h	generic: ar8216: add custom LED support for the AR8327 switch	2014-01-20 10:22:56 +00:00
ip17xx.c
micrel.c	ar71xx: move micrel PHY driver to the generic linux target	2012-03-15 09:25:53 +00:00
mvswitch.c	generic: mvswitch: add detach callback	2013-02-07 15:18:34 +00:00
mvswitch.h
psb6970.c
rtl8306.c	revert: kernel: rtl8306: fix max pvid & remove port isolation	2014-03-30 10:04:55 +00:00
rtl8366_smi.c	strict_strtoul is obsolete, use kstrtoul instead	2013-07-27 09:23:18 +00:00
rtl8366_smi.h	linux: generic: rtl836*: fix compilation with !CONFIG_OF	2012-12-15 13:32:02 +00:00
rtl8366rb.c	generic: add port mirroring/monitoring capability to rtl8366rb switch	2013-06-04 13:25:52 +00:00
rtl8366s.c	fix rtl8366s OF binding	2013-04-12 18:56:05 +00:00
rtl8367.c	rtl8367: add support for configuring the VLAN FID	2013-08-12 17:25:25 +00:00
rtl8367b.c	generic: rtl8367: add compatible string with vendor prefix	2013-04-06 17:19:31 +00:00
swconfig_leds.c	ar71xx: swconfig: use the local helper to set LED brightness on link down	2014-01-26 16:46:21 +00:00
swconfig.c	kernel: fix warning in swconfig.c with kernel 3.14	2014-05-08 21:52:19 +00:00