Hauke Mehrtens 72d93c1ba4 realtek: Fix failsafe mode ... The RTL8380-RTL9300 switches only forward packets when VLAN ID 1 is configured. Do not use the standard failsafe configuration for DSA accessing the default port directly, but configure a switch on the lan1 interface instead. This will add the VLAN ID 1 configuration to the switch: $ bridge vlan show port vlan-id lan1 1 PVID Egress Untagged switch 1 PVID Egress Untagged Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit b7ee0786b5)		2021-06-22 23:52:09 +02:00
..
base-files	realtek: Fix failsafe mode	2021-06-22 23:52:09 +02:00
dts	realtek: allow writing to "u-boot-env2"	2021-04-18 12:06:57 +02:00
files/firmware/rtl838x_phy
files-5.4	realtek: enable SerDes NWAY and SGMII negotiation	2021-04-18 12:06:45 +02:00
generic
image	realtek: add ZYXEL_VERS to DEVICE_VARS	2021-04-18 12:06:49 +02:00
patches-5.4	kernel: bump 5.4 to 5.4.119	2021-05-15 19:32:20 +02:00
profiles	target: use SPDX license identifiers on Makefiles	2021-02-10 15:47:18 +01:00
config-5.4	realtek: enabled Marvell and Realtek PHYs	2021-04-18 12:06:41 +02:00
Makefile	target: use SPDX license identifiers on Makefiles	2021-02-10 15:47:18 +01:00