Sven Roederer e0d98e120a ath79: add TP-Link WR842N v3 ... This adds support for the TP-Link WR842N v3 which is already supported on ar71xx target (0b45bec22c). Specification: * SoC: QCA9533 ver 2 rev 0 * 16 MB Flash (gd25q128) * 64 MB RAM * 1 WAN 10/100 MBit/s (blue connector) * 4 LAN 10/100 MBit/s (AR8229; 4 ports; yellow connectors) * Atheros AR9531 (2,4GHz, two fixed antennas) * USB * Reset / WPS button * WiFi button (rf kill) * 8 green leds; 1 red/green led * serial console (115200 8N1, according to the OpenWrt-wiki some soldering is needed) Installation: * flash via vendor WebUI (the filename must not exceed certain length) * sysupgrade from installed OpenWrt (also ar71xx) Thanks to Holger Drefs for providing the hardware Tested-by: @kofec (github) Signed-off-by: Sven Roederer <devel-sven@geroedel.de>		2019-04-13 14:39:59 +02:00
..
01_leds	ath79: add TP-Link WR842N v3	2019-04-13 14:39:59 +02:00
02_network	ath79: add TP-Link WR842N v3	2019-04-13 14:39:59 +02:00
03_gpio_switches	ath79: add support for Ubiquiti airCube ISP	2019-04-08 18:37:04 +02:00