immortalwrt/target/linux/ipq807x/Makefile
Robert Marko b5f32064ed ipq807x: add Qualcomm Atheros IPQ807x target
Qualcomm Atheros IPQ807x is a modern WiSoC featuring:
* Quad Core ARMv8 Cortex A-53
	* @ 2.2 GHz (IPQ8072A/4A/6A/8A) Codename Hawkeye
	* @ 1.4 GHz (IPQ8070A/1A) Codename Acorn
* Dual Band simultaneaous IEEE 802.11ax
	* 5G: 8x8/80 or 4x4/160MHz (IPQ8074A/8A)
	* 5G: 4x4/80 or 2x2/160MHz (IPQ8071A/2A/6A)
	* 5G: 2x2/80MHz (IPQ8070A)
	* 2G: 4x4/40MHz (IPQ8072A/4A/6A/8A)
	* 2G: 2x2/40MHz (IPQ8070A/1A)
* 1x PSGMII via QCA8072/5 (Max 5x 1GbE ports)
* 2x SGMII/USXGMII (1/2.5/5/10 GbE) on Hawkeye
* 2x SGMII/USXGMII (1/2.5/5 GbE) on Acorn
* DDR3L/4 32/16 bit up to 2400MT/s
* SDIO 3.0/SD card 3.0/eMMC 5.1
* Dual USB 3.0
* One PCIe Gen2.1 and one PCIe Gen3.0 port (Single lane)
* Parallel NAND (ONFI)/LCD
* 6x QUP BLSP SPI/I2C/UART
* I2S, PCM, and TDMA
* HW PWM
* 1.8V configurable GPIO
* Companion PMP8074 PMIC via SPMI (GPIOS, RTC etc)

Note that only v2 SOC models aka the ones ending with A suffix are
supported, v1 models do not comply to the final 802.11ax and have
lower clocks, lack the Gen3 PCIe etc.

SoC itself has two UBI32 cores for the NSS offloading system, however
currently no offloading is supported.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2023-01-16 12:42:23 +01:00

22 lines
480 B
Makefile

include $(TOPDIR)/rules.mk
ARCH:=aarch64
BOARD:=ipq807x
BOARDNAME:=Qualcomm Atheros IPQ807x
FEATURES:=squashfs ramdisk fpu nand rtc
KERNELNAME:=Image dtbs
CPU_TYPE:=cortex-a53
SUBTARGETS:=generic
KERNEL_PATCHVER:=5.15
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += \
kmod-usb3 kmod-usb-dwc3 kmod-usb-dwc3-qcom \
kmod-leds-gpio kmod-gpio-button-hotplug \
libwolfsslcpu-crypto \
ath11k-firmware-ipq8074 \
wpad-basic-wolfssl uboot-envtools
$(eval $(call BuildTarget))