John Crispin 7fe0940c69 generic: fix adm6996 init ... Kernel 3.14 added aditional genphy_soft_reset phy reset to phy_init_hw in drivers/net/phy/phy_device.c Since adm6996 does in driver soft reset and doesn't use BMCR_RESET for soft reset add dummy soft_reset callback to adm6996 driver, like it is done in ar8216. This fixes ticket #20147 Signed-off-by: Andrej Vlasic <andrej.vlasic0@gmail.com> SVN-Revision: 47272		2015-10-26 10:39:53 +00:00
..
b53	kernel: b53: fix build with brcm47xx	2015-07-03 23:27:21 +00:00
adm6996.c	generic: fix adm6996 init	2015-10-26 10:39:53 +00:00
adm6996.h	linux/generic: add MIB counters and port status to ADM6996 switch	2014-04-22 08:08:02 +00:00
ar8216.c	ar8216: add swconfig attributes for ARL table flushing	2015-07-15 08:17:42 +00:00
ar8216.h	ar8216: add swconfig attributes for ARL table flushing	2015-07-15 08:17:42 +00:00
ar8327.c	ar8216: add swconfig attributes for ARL table flushing	2015-07-15 08:17:42 +00:00
ar8327.h	ar8216: add ARL table flushing per port	2015-07-15 08:17:28 +00:00
ip17xx.c
mvsw61xx.c	mvsw61xx: match swconfig function names	2015-09-11 16:34:49 +00:00
mvsw61xx.h	Previously, all VLANs (port-based or 802.1q) were sharing a single database in the ATU. This created problems in the case of a system where two ports/devices share a MAC address (e.g. Linksys WRT1900AC eth0/eth1).	2015-08-21 08:09:52 +00:00
mvswitch.c
mvswitch.h
psb6970.c
rtl8306.c	revert: kernel: rtl8306: fix max pvid & remove port isolation	2014-03-30 10:04:55 +00:00
rtl8366_smi.c
rtl8366_smi.h
rtl8366rb.c
rtl8366s.c
rtl8367.c
rtl8367b.c
swconfig_leds.c	ar71xx: swconfig: use the local helper to set LED brightness on link down	2014-01-26 16:46:21 +00:00
swconfig.c	swconfig: fix build with linux 4.0	2015-03-06 07:57:03 +00:00