Hauke Mehrtens 9c9dfab853 realtek: Fix failsafe mode ... The RTL8380-RTL9300 switches only forward packets when VLAN ID 1 is configured. Do not use the standard failsafe configuration for DSA accessing the default port directly, but configure a switch on the lan1 interface instead. This will add the VLAN ID 1 configuration to the switch: $ bridge vlan show port vlan-id lan1 1 PVID Egress Untagged switch 1 PVID Egress Untagged Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>		2021-06-23 23:18:17 +08:00
..
base-files	realtek: Fix failsafe mode	2021-06-23 23:18:17 +08:00
dts	realtek: add support for INABA Abaniact AML2-17GP	2021-05-08 00:17:03 +08:00
files/firmware/rtl838x_phy	realtek: update the tree to the latest refactored version	2020-11-28 19:04:55 +08:00
files-5.4	realtek: Fix buffer length calculation on RTL8380 with CRC offload	2021-06-23 23:15:27 +08:00
generic	realtek: update the tree to the latest refactored version	2020-11-28 19:04:55 +08:00
image	realtek: add support for INABA Abaniact AML2-17GP	2021-05-08 00:17:03 +08:00
patches-5.4	kernel: bump 5.4 to 5.4.116	2021-05-08 00:15:19 +08:00
profiles	target: use SPDX license identifiers on Makefiles	2021-02-11 12:05:39 +08:00
config-5.4	treewide: switch the timer frequency to 100 Hz	2021-04-22 23:12:24 +08:00
Makefile	target: use SPDX license identifiers on Makefiles	2021-02-11 12:05:39 +08:00