Tianling Shen cc6c3a6ee8 mediatek: add support for OpenEmbed SOM7981 ... Hardware specification: SoC: MediaTek MT7981B 2x A53 Flash: 256 MiB SPI-NAND, 32 GB eMMC optional RAM: 0.5/1 GB DDR4 Ethernet: 1x 1GbE, 1x 2.5GbE (RTL8221B) WiFi: MediaTek MT7976C USB: 1x USB 3.0 GPIO: 26-Pin header UART: 6 GND, 8 TX, 10 RX (in Pin header) Button: Reset, WPS Power: Type-C PD Installation: The board comes with a third-party custom OpenWrt image, you can upload sysupgrade image via LuCI directly WITHOUT keeping configurations. Or power on the board with pressing reset button for 5 second, then visit http://192.168.1.1 and upload -factory.bin firmware. Signed-off-by: Tianling Shen <cnsztl@gmail.com>		2024-03-31 20:20:59 +02:00
..
base-files	treewide: use APK compatible version schema	2024-03-22 22:14:22 +01:00
boot	mediatek: add support for OpenEmbed SOM7981	2024-03-31 20:20:59 +02:00
devel	perf: fix build on linux 6.6	2024-03-29 15:41:16 +01:00
firmware	linux-firmware: add missing LICENSE_FILES info	2024-03-29 13:11:47 +01:00
kernel	filogic: Add LED driver for GCA230718	2024-03-31 19:01:19 +02:00
libs	treewide: use APK compatible version schema	2024-03-22 22:14:22 +01:00
network	unetd: update to Git HEAD (2024-03-31)	2024-03-31 19:42:30 +02:00
system	procd: update to Git HEAD (2024-03-25)	2024-03-25 11:50:19 +01:00
utils	dtc: fix compilation with both libraries	2024-03-29 23:42:22 +01:00
Makefile	build: do not depend on $(STAGING_DIR)/.prepared when in SDK	2024-03-04 23:45:15 +01:00