Adrian Schmutzler 57e4cc8261 ipq806x: disable CONFIG_CMDLINE_OVERRIDE and ASRock G10 ... After device support for ASRock G10 was added in [1], several people reported broken ipq806x devices, with one or several of the following symptoms: - Device does not boot - Sysupgrade does not work - Serial console is broken The issues appears to be caused by the introduction of the symbol CONFIG_CMDLINE_OVERRIDE=y in [1]. This patch disables the corresponding symbol again and marks the ASRock as BROKEN, as it probably won't work properly without it. Further references: https://bugs.openwrt.org/index.php?do=details&task_id=3540 98b86296e6 (commitcomment-45455875) [1] 98b86296e6 ("ipq806x: add support for ASRock G10") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>		2020-12-28 15:17:57 +01:00
..
base-files	ipq806x: add support for NEC Platforms Aterm WG2600HP3	2020-12-25 10:38:13 +01:00
files/arch/arm/boot/dts	ipq806x: add support for NEC Platforms Aterm WG2600HP3	2020-12-25 10:38:13 +01:00
files-5.4/arch/arm/boot/dts	ipq806x: add support for ASRock G10	2020-12-22 19:11:50 +01:00
generic	ipqx0xx: add Generic subtarget	2019-08-22 21:15:28 +02:00
image	ipq806x: disable CONFIG_CMDLINE_OVERRIDE and ASRock G10	2020-12-28 15:17:57 +01:00
patches-5.4	ipq806x: add support for NEC Platforms Aterm WG2600HP3	2020-12-25 10:38:13 +01:00
profiles	mac80211: fix selecting of ath10k -ct firmware	2018-09-27 00:22:13 +02:00
config-5.4	ipq806x: disable CONFIG_CMDLINE_OVERRIDE and ASRock G10	2020-12-28 15:17:57 +01:00
Makefile	treewide: use wpad-basic-wolfssl as default	2020-08-20 14:19:39 +02:00
modules.mk	kernel: usb: move phy-qcom-ipq806x-usb to ipq806x modules.mk	2020-08-13 02:12:12 +02:00