An opensource OpenWrt variant for mainland China users.

Go to file

Sebastian Schaper dbdd50750c ath79: add support for D-Link DAP-3320 A1 Specifications: * QCA9533, 16 MiB Flash, 64 MiB RAM, 802.11n 2T2R * 10/100 Ethernet Port, 802.11af PoE * IP55 pole-mountable outdoor case Installation: * Factory Web UI is at 192.168.0.50 login with 'admin' and blank password, flash factory.bin * Recovery Web UI is at 192.168.0.50 connect network cable, hold reset button during power-on and keep it pressed until uploading has started (only required when checksum is ok, e.g. for reverting back to oem firmware), flash factory.bin After flashing factory.bin, additional free space can be reclaimed by flashing sysupgrade.bin, since the factory image requires some padding to be accepted for upgrading via OEM Web UI. Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>		2021-01-07 09:55:53 +08:00
config	Merge Mainline	2021-01-02 12:13:39 +08:00
include	Merge Mainline	2021-01-02 12:13:39 +08:00
package	Merge Mainline	2021-01-02 12:13:39 +08:00
scripts	Merge Mainline	2021-01-02 12:13:39 +08:00
target	ath79: add support for D-Link DAP-3320 A1	2021-01-07 09:55:53 +08:00
toolchain	Merge Mainline	2020-12-31 17:55:19 +08:00
tools	Merge Mainline	2021-01-02 12:13:39 +08:00
.gitattributes	fix permisson	2019-08-16 15:09:42 +08:00
.gitignore	build: improve ccache support	2021-01-02 12:08:17 +08:00
BSDmakefile	packages: apply usign padding workarounds to package indexes if needed	2019-08-16 14:48:02 +08:00
Config.in	packages: apply usign padding workarounds to package indexes if needed	2019-08-16 14:48:02 +08:00
CONTRIBUTED.md	Merge Mainline	2020-12-25 19:25:12 +08:00
feeds.conf.default	feeds: switch to github official repo	2020-06-20 12:06:05 +08:00
LICENSE	packages: apply usign padding workarounds to package indexes if needed	2019-08-16 14:48:02 +08:00
Makefile	build: use CCACHE_DIR for ccache directory	2021-01-02 12:12:11 +08:00
README.md	README: rename branch to openwrt-18.06-k5.4	2020-08-08 13:53:33 +08:00
rules.mk	build: improve ccache support	2021-01-02 12:08:17 +08:00

README.md

PROJECT OPENWRT

The Source Code of OpenWrt-Lean Modified by CTCGFW

Welcome to our Telegram Group: @ctcgfw_openwrt_discuss.

How to make it

Minimum requirements

Linux with case sensitive
2G DDR2 RAM
2 CPU Cores (AMD64, 1.4Ghz)
25G disk space left
Has access to both ChinaNet & Internet

Install the necessary packages (for Ubuntu user)

sudo apt-get update -y
sudo apt-get full-upgrade -y
sudo apt-get install -y build-essential asciidoc binutils bzip2 gawk gettext git libncurses5-dev libz-dev patch unzip zlib1g-dev lib32gcc1 libc6-dev-i386 subversion flex uglifyjs git-core gcc-multilib g++-multilib p7zip p7zip-full msmtp libssl-dev texinfo libreadline-dev libglib2.0-dev xmlto qemu-utils upx libelf-dev autoconf automake libtool autopoint ccache curl wget vim nano python python3 python-pip python3-pip python-ply python3-ply haveged lrzsz device-tree-compiler scons antlr3 gperf intltool rsync

For mainland China & Ubuntu(16.04+) user, you may run the following command to setup quickly:

sudo bash -c "bash <(curl -s https://build-scripts.project-openwrt.eu.org/init_build_environment.sh)"

Clone the source

git clone -b openwrt-18.06-k5.4 --single-branch https://github.com/project-openwrt/openwrt && cd openwrt
./scripts/feeds update -a && ./scripts/feeds install -a

Configure your firmware

make menuconfig

Make it

make -j1 V=s

Tips

You'd better not use root to make it, or you may be not able to use.
Default login address: 192.168.1.1, username is root and password is password.