WonJung Kim ddf3eb8beb ramips: add support for ipTIME A3004T ... ipTIME A3004T is a 2.4/5GHz band router, based on Mediatek MT7621. Specifications: - SoC: MT7621 (880MHz) - RAM: DDR3 256M - Flash: NAND 128MB (Macronix NAND 128MiB 3,3V 8-bit) - WiFi: - 2.4GHz: MT7615E - 5GHz : MT7615E - Ethernet: - 4x LAN - 1x WAN - USB: 1 * USB3.0 port - UART: - 3.3V, TX, RX, GND / 57600 8N1 Installation via web interface: 1. Flash initramfs image using OEM's Recovery mode 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Revert to stock firmware: - Flash stock firmware via OEM's Recovery mode How to use OEM's Recovery mode: 1. Power up with holding down the reset key until CPU LED stop blinking. 2. Set fixed ip with `192.168.0.2` with subnet mask `255.255.255.0` 3. Flash image via tftp to `192.168.0.1` Additional Notes: This router shares one MT7915E chip for both 2.4Ghz/5Ghz. radio0 will not working on 5Ghz as it's not connected to the antenna. Signed-off-by: WonJung Kim <git@won-jung.kim> (added led dt-bindings) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>		2022-04-16 23:26:56 +08:00
..
lzma-loader	ramips: sync official source code	2020-09-12 15:01:12 +08:00
common-tp-link.mk	treewide: call check-size before append-metadata	2021-07-11 12:13:31 +08:00
Makefile	ramips: mt7620: use OKLI loader with Jboot devices	2021-12-26 23:53:52 +08:00
mt76x8.mk	ramips: use parser_trx for Buffalo WCR-1166DS	2022-03-11 23:38:23 +08:00
mt7620.mk	ramips: add support for WeVO AIR DUO	2022-04-16 23:23:13 +08:00
mt7621.mk	ramips: add support for ipTIME A3004T	2022-04-16 23:26:56 +08:00
rt288x.mk	ramips: sync official source code	2020-09-12 15:01:12 +08:00
rt305x.mk	ramips: fix DEVICE_VENDOR for unbranded devices	2022-03-10 09:08:48 +08:00
rt3883.mk	rt3883: disable build for rt-n56u	2022-01-14 12:58:18 +08:00