fish/immortalwrt
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
de4bff44f0
immortalwrt/target/linux
History
Lech Perczak de4bff44f0 ar71xx: fix reset key for TP-Link TL-WR802N V1/V2 
During porting support for this router to ath79 target
it was discovered that GPIO mapping was incorrect (GPIO11 active high).
Correct mapping for both V1 and V2 is GPIO12 active low.

Default configuration from GPL source for V2 explicitly states this, and
this was confirmed experimentally on ath79 by looking on
/sys/kernel/debug/gpio. Correctness of this was also validated for V1 by
cross-flashing vendor firmware for V1 on V2 hardware, in which reset
button also worked.

Fix it.

Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
[slightly adjust commit title]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-06-01 12:03:28 +08:00
..
apm821xx treewide: adjust sysupgrade script 2020-05-05 22:18:12 +08:00
ar7 kernel: bump to 4.9.207, 4.14.160, 4.19.91 2019-12-24 23:57:52 -08:00
ar71xx ar71xx: fix reset key for TP-Link TL-WR802N V1/V2 2020-06-01 12:03:28 +08:00
arc770 update target 2019-08-19 22:26:19 +08:00
archs38 update target 2019-08-19 22:26:19 +08:00
armvirt update target 2019-08-19 22:26:19 +08:00
at91 at91: switch to 4.14 (#3040) 2020-02-11 17:26:30 +08:00
ath25 kernel: bump to 4.9.214, 4.14.171, 4.19.106 (#3375) 2020-02-29 16:28:07 +08:00
ath79 ath79: fix LEDs for GL.inet GL-AR150 2020-06-01 12:01:59 +08:00
bcm27xx target/bcm27xx: enable audio by default 2020-05-31 13:31:52 +08:00
bcm53xx kernel: bump 4.14 to 4.14.178 2020-05-03 19:33:01 +08:00
brcm47xx kernel: bump to 4.9.223, 4.14.180, 4.19.122 (#4600) 2020-05-13 13:28:43 +08:00
brcm63xx bcm63xx: mask interrupts on init 2020-05-19 12:31:06 +08:00
cns3xxx kernel: bump 4.19 to 4.19.118 2020-04-25 11:08:19 +08:00
gemini gemini:refresh upstream patch 2019-12-10 22:03:39 -08:00
generic generic: 4.19: add missing config 2020-05-31 13:50:02 +08:00
imx6 kernel: bump 4.19 to 4.19.110 2020-03-19 17:50:48 +08:00
ipq40xx kernel: bump 4.19 to 4.19.124 2020-05-24 21:59:06 +08:00
ipq806x kernel: bump 4.19 to 4.19.124 2020-05-24 21:59:06 +08:00
ipq807x ipq807x: add very basic target support 2020-02-29 22:59:08 -08:00
ixp4xx kernel: bump 4.9 to 4.9.220 2020-04-25 08:06:59 +08:00
kirkwood kernel: bump to 4.9.214, 4.14.171, 4.19.106 (#3375) 2020-02-29 16:28:07 +08:00
lantiq lantiq: sync official source code 2020-04-25 18:29:43 +08:00
layerscape kernel: bump 4.14 to 4.14.181 2020-05-24 21:25:57 +08:00
malta update target 2019-08-19 22:26:19 +08:00
mediatek kernel: bump 4.14 to 4.14.177 2020-05-03 19:32:54 +08:00
mpc85xx kernel: bump to 4.9.214, 4.14.171, 4.19.106 (#3375) 2020-02-29 16:28:07 +08:00
mvebu kernel: bump 4.14 to 4.14.177 2020-05-03 19:32:54 +08:00
mxs kernel: bump 4.14 to 4.14.177 2020-05-03 19:32:54 +08:00
octeon update target 2019-08-19 22:26:19 +08:00
octeontx kernel: bump to 4.9.219, 4.14.176, 4.19.115 (#4350) 2020-04-17 11:50:34 +08:00
omap update target 2019-08-19 22:26:19 +08:00
orion update target 2019-08-19 22:26:19 +08:00
oxnas kernel: bump 4.14 to 4.14.177 2020-05-03 19:32:54 +08:00
pistachio kernel: bump to 4.9.214, 4.14.171, 4.19.106 (#3375) 2020-02-29 16:28:07 +08:00
ramips kernel: bump 4.14 to 4.14.182 2020-05-30 21:59:32 +08:00
rb532 build: allow overriding default selection state for devices 2019-10-19 11:35:16 -07:00
samsung update target 2019-08-19 22:26:19 +08:00
sunxi target/sunxi: add support for nanopi duo2/r1/r1s on kernel 4.19 2020-05-24 11:21:02 +00:00
tegra kernel: bump to 4.14.167, 4.19.98 (#2871) 2020-01-30 01:43:29 +08:00
uml update target 2019-08-19 22:26:19 +08:00
x86 target/x86|bcm27xx: adjust default packages 2020-05-31 08:58:09 +08:00
zynq update target 2019-08-19 22:26:19 +08:00
Makefile update target 2019-08-19 22:26:19 +08:00