Sebastian Schaper e68f32a58b ath79: add support for D-Link DAP-2680 A1 ... Specifications: * QCA9558, 16 MiB Flash, 256 MiB RAM, 802.11n 3T3R * QCA9984, 802.11ac Wave 2 3T3R * Gigabit LAN Port (AR8035), 802.11at PoE Installation: * Factory Web UI is at 192.168.0.50 login with 'admin' and blank password, flash factory.bin * Recovery Web UI is at 192.168.0.50 connect network cable, hold reset button during power-on and keep it pressed until uploading has started (only required when checksum is ok, e.g. for reverting back to oem firmware), flash factory.bin After flashing factory.bin, additional free space can be reclaimed by flashing sysupgrade.bin, since the factory image requires some padding to be accepted for upgrading via OEM Web UI. Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>		2021-01-07 09:55:50 +08:00
..
imagebuilder	imagebuilder: invoke bundle-libraries.sh w/o buildroot dirs in $PATH	2020-12-31 17:44:24 +08:00
linux	ath79: add support for D-Link DAP-2680 A1	2021-01-07 09:55:50 +08:00
sdk	build: improve ccache support	2021-01-02 12:08:17 +08:00
toolchain	build: improve ccache support	2021-01-02 12:08:17 +08:00
Config.in	Merge Mainline	2020-09-28 13:14:47 +08:00
Makefile	update target	2019-08-19 22:26:19 +08:00