An opensource OpenWrt variant for mainland China users.

Go to file

Adrian Schmutzler e8d4ff8e1a ath79: add support for TP-Link TL-WDR7500 v3 This ports support for the TP-Link TL-WDR7500 v3 from ar71xx to ath79. The basic features appear to be identical to the Archer C7 v1, however it has the (supported) QCA9880-BR4A chip of the C7 v2. Specifications: SoC: QCA9558 CPU: 720 MHz Flash: 8 MiB RAM: 128 MiB WLAN: 2.4 GHz b/g/n, 5 GHz a/n/ac Qualcomm Atheros QCA9880-BR4A Ethernet: 5x Gbit ports USB: 2x 2.0 ports Flashing instructions: Upload the factory image via the OEM firmware GUI. TFTP recovery appears to be available as well. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>		2020-12-05 17:20:46 +08:00
config	Merge Mainline	2020-11-28 19:17:32 +08:00
include	kernel: bump 5.4 to 5.4.81	2020-12-05 17:19:43 +08:00
package	build: Extract trusted-firmware-a.mk	2020-12-05 17:15:49 +08:00
scripts	Merge Mainline	2020-11-28 19:17:32 +08:00
target	ath79: add support for TP-Link TL-WDR7500 v3	2020-12-05 17:20:46 +08:00
toolchain	toolchain: musl: refresh patches	2020-12-05 17:15:44 +08:00
tools	Merge Mainline	2020-11-28 19:17:32 +08:00
.gitattributes	fix permisson	2019-08-16 15:09:42 +08:00
.gitignore	gitignore: ignore patches in root directory	2020-02-25 15:39:25 +08:00
BSDmakefile	packages: apply usign padding workarounds to package indexes if needed	2019-08-16 14:48:02 +08:00
Config.in	packages: apply usign padding workarounds to package indexes if needed	2019-08-16 14:48:02 +08:00
CONTRIBUTED.md	Merge Mainline	2020-08-28 01:59:52 +08:00
feeds.conf.default	feeds: switch to github official repo	2020-06-20 12:06:05 +08:00
LICENSE	packages: apply usign padding workarounds to package indexes if needed	2019-08-16 14:48:02 +08:00
Makefile	Makefile: sync with official source	2020-07-30 23:49:33 +08:00
README.md	README: rename branch to openwrt-18.06-k5.4	2020-08-08 13:53:33 +08:00
rules.mk	Revert "rules.mk: remove redundant target flags"	2020-11-28 19:26:24 +08:00

README.md

PROJECT OPENWRT

The Source Code of OpenWrt-Lean Modified by CTCGFW

Welcome to our Telegram Group: @ctcgfw_openwrt_discuss.

How to make it

Minimum requirements

Linux with case sensitive
2G DDR2 RAM
2 CPU Cores (AMD64, 1.4Ghz)
25G disk space left
Has access to both ChinaNet & Internet

Install the necessary packages (for Ubuntu user)

sudo apt-get update -y
sudo apt-get full-upgrade -y
sudo apt-get install -y build-essential asciidoc binutils bzip2 gawk gettext git libncurses5-dev libz-dev patch unzip zlib1g-dev lib32gcc1 libc6-dev-i386 subversion flex uglifyjs git-core gcc-multilib g++-multilib p7zip p7zip-full msmtp libssl-dev texinfo libreadline-dev libglib2.0-dev xmlto qemu-utils upx libelf-dev autoconf automake libtool autopoint ccache curl wget vim nano python python3 python-pip python3-pip python-ply python3-ply haveged lrzsz device-tree-compiler scons antlr3 gperf intltool rsync

For mainland China & Ubuntu(16.04+) user, you may run the following command to setup quickly:

sudo bash -c "bash <(curl -s https://build-scripts.project-openwrt.eu.org/init_build_environment.sh)"

Clone the source

git clone -b openwrt-18.06-k5.4 --single-branch https://github.com/project-openwrt/openwrt && cd openwrt
./scripts/feeds update -a && ./scripts/feeds install -a

Configure your firmware

make menuconfig

Make it

make -j1 V=s

Tips

You'd better not use root to make it, or you may be not able to use.
Default login address: 192.168.1.1, username is root and password is password.