Daniel Golle 8b6d6f28c1 mediatek: mt7622: unifi6lr: properly register Ethernet PHY ... This change enables proper Ethernet link status and speed reporting on the Ubiquiti UniFi 6 LR access point: mtk_soc_eth 1b100000.ethernet eth0: PHY [mdio-bus:08] driver [Aquantia AQR112C] (irq=POLL) mtk_soc_eth 1b100000.ethernet eth0: configuring for phy/2500base-x link mode mtk_soc_eth 1b100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx Signed-off-by: Daniel Golle <daniel@makrotopia.org>		2021-12-26 19:11:54 +00:00
..
base-files	mediatek: add support for Ubiquiti UniFi 6 LR	2021-02-18 01:15:45 +01:00
dts	mediatek: mt7622: unifi6lr: properly register Ethernet PHY	2021-12-26 19:11:54 +00:00
files-5.10/drivers	mediatek: mtk-snand: check request size against chip info	2021-08-27 10:26:25 +08:00
image	mediatek: add support for TOTOLINK A8000RU	2021-09-03 15:53:28 +08:00
mt7622	mediatek: mt7622: enable driver for Aquantia PHYs	2021-12-26 19:11:49 +00:00
mt7623	kernel: 5.10: consolidate mac80211 crypto options	2021-12-17 16:16:34 +01:00
mt7629	kernel: 5.10: consolidate mac80211 crypto options	2021-12-17 16:16:34 +01:00
patches-5.10	mediatek: add support for Clause 45 MDIO access	2021-12-26 19:11:43 +00:00
Makefile	mediatek: mt7622: switch to generic eMMC sysupgrade	2021-12-02 20:43:12 +00:00
modules.mk	mediatek: build btmtkuart as a kernel module	2020-09-22 21:07:50 +08:00