An opensource OpenWrt variant for mainland China users.
ef26af2420
Specification: - CPU: 580 MHz - Flash size: 128 MiB NAND - RAM size: 128 MiB DDR2 - Wireless No1: SoC-integrated: MT7620A 2x2 MIMO 802.11b/g/n (2.4 GHz) - Wireless No2: On-board chip: MT7612E 2x2 MIMO 802.11a/n/ac (5 GHz) - Switch: MT7620 built-in 10/100 switch w/ vlan support - USB: 2.0 x1 Flash instructions: 1. access ssh via https://wiki.openwrt.org/toh/xiaomi/mir3 2. in ssh: nvram set flag_last_success=1 nvram set boot_wait=on nvram set uart_en=1 nvram commit mtd write lede-ramips-mt7620-miwifi-r3-squashfs-kernel1.bin kernel1 mtd write lede-ramips-mt7620-miwifi-r3-squashfs-rootfs0.bin rootfs0 reboot If you want to revert back to stock fw while on LEDE: insert usb stick (FAT/FAT32) with stock fw renamed to miwifi.bin fw_setenv flag_last_success 0 power off the device hold the reset button and power on the device, keep holding the reset button until yellow led starts blinking. Signed-off-by: Chen Minqiang <ptpt52@gmail.com> |
||
|---|---|---|
| config | ||
| include | ||
| package | ||
| scripts | ||
| target | ||
| toolchain | ||
| tools | ||
| .gitattributes | ||
| .gitignore | ||
| BSDmakefile | ||
| Config.in | ||
| CONTRIBUTED.md | ||
| feeds.conf.default | ||
| LICENSE | ||
| Makefile | ||
| README.md | ||
| rules.mk | ||
PROJECT OPENWRT
The Source Code of OpenWrt Modified by CTCGFW
Welcome to my Telegram Group: @ctcgfw_openwrt_discuss.
How to make it
Minimum requirements
Linux with case sensitive
2G DDR2 RAM
2 CPU Cores (AMD64, 1.4Ghz)
25G disk space left
Has access to both ChinaNet & Internet
Install the necessary packages (for Ubuntu user)
sudo apt-get update -y
sudo apt-get full-upgrade -y
sudo apt-get install -y build-essential asciidoc binutils bzip2 gawk gettext git libncurses5-dev libz-dev patch unzip zlib1g-dev lib32gcc1 libc6-dev-i386 subversion flex uglifyjs git-core gcc-multilib g++-multilib p7zip p7zip-full msmtp libssl-dev texinfo libreadline-dev libglib2.0-dev xmlto qemu-utils upx libelf-dev autoconf automake libtool autopoint ccache curl wget vim nano python python3 python-pip python3-pip python-ply python3-ply haveged lrzsz device-tree-compiler scons
For mainland China & Ubuntu(16.04+) user, you may run the following command to setup quickly:
sudo bash -c "bash <(curl -s https://build-scripts.project-openwrt.eu.org/init_build_environment.sh)"
Clone the source
git clone https://github.com/project-openwrt/openwrt && cd openwrt
./scripts/feeds update -a && ./scripts/feeds install -a
For developer, you may use dev branch instead of master.
Configure your firmware
make menuconfig
Make it
make -j1 V=s
Tips
You'd better not use root to make it, or you may be not able to use.
Default login address: 192.168.1.1, username is root and password is password.