Tee Hao Wei ef7ce48d28 ramips: add support for Linksys EA8100 v2 ... Specifications: - SoC: MT7621AT - RAM: 256MB - Flash: 128MB NAND - Ethernet: 5 Gigabit ports - WiFi: 2.4G/5G MT7615N - USB: 1 USB 3.0, 1 USB 2.0 This device is very similar to the EA7300 v1/v2, EA7500 v2, and EA8100 v1. Installation: Upload the generated factory image through the factory web interface. (following part taken from EA7300 v2 commit message:) This might fail due to the A/B nature of this device. When flashing, OEM firmware writes over the non-booted partition. If booted from 'A', flashing over 'B' won't work. To get around this, you should flash the OEM image over itself. This will then boot the router from 'B' and allow you to flash OpenWRT without problems. Reverting to factory firmware: Hard-reset the router three times to force it to boot from 'B.' This is where the stock firmware resides. To remove any traces of OpenWRT from your router simply flash the OEM image at this point. With thanks to Tom Wizetek (@wizetek) for testing. Signed-off-by: Tee Hao Wei <angelsl@in04.sg>		2021-07-12 12:02:53 +08:00
..
base-files	base-files: wifi: tidy up the reconf code	2021-06-29 23:53:27 +08:00
boot	ramips: add support for Linksys EA8100 v2	2021-07-12 12:02:53 +08:00
devel	Merge Mainline	2021-05-26 17:14:27 +08:00
emortal	Merge Mainline	2021-07-01 23:28:03 +08:00
firmware	brcmfmac4366c0-firmware-vendor: move to firmware	2021-06-24 17:23:46 +08:00
kernel	mac80211: backport fix for nl80211 control port tx (fixes FS#3857)	2021-07-01 23:15:48 +08:00
libs	Merge Mainline	2021-06-26 16:49:16 +08:00
network	hostapd: add HE flag to get_clients	2021-07-06 23:08:04 +08:00
system	Merge Mainline	2021-07-01 23:28:03 +08:00
utils	Merge Mainline	2021-07-01 23:28:03 +08:00
Makefile	Merge Mainline	2021-05-13 23:01:12 +08:00