immortalwrt

History

Petr Štetiar f965f3a549 malta: configure kernel for f2fs and ext4 based overlays jffs2/mtdblock overlays are long time gone, and as we switch to the new f2fs/ext4 based overlays, we need to add missing support for loop block device and f2fs to kernel. Signed-off-by: Petr Štetiar <ynezz@true.cz>		2019-06-25 14:12:22 +00:00
..
base-files/etc	image / basefiles: make console password configurable	2016-04-18 21:53:07 +02:00
be	malta: upgrade to kernel 4.9	2017-10-15 14:22:01 +02:00
be64	malta: Deactivate MIPS O32 and N32 support	2019-05-14 21:50:42 +02:00
image	treewide: do not use IMG_PREFIX in Image/Prepare	2017-10-26 12:26:25 +02:00
le	malta: upgrade to kernel 4.9	2017-10-15 14:22:01 +02:00
le64	malta: Deactivate MIPS O32 and N32 support	2019-05-14 21:50:42 +02:00
config-4.14	malta: Refresh kernel 4.14 configuration	2019-01-13 16:31:38 +01:00
config-4.19	malta: configure kernel for f2fs and ext4 based overlays	2019-06-25 14:12:22 +00:00
Makefile	treewide: kernel: bump some targets to 4.19	2019-06-18 16:08:55 +02:00
README	malta: fix image prefix names	2018-01-09 10:26:16 +01:00

README

This Malta target is intended to be used with the Qemu emulator. It can be used
to prototype an OpenWrt firmware for MIPS processors. One could also use it to
troubleshoot MIPS applications without access to real hardware.

To use the images built by OpenWrt with qemu, use the following commands:

For the 32 bit little-endian image:
qemu-system-mipsel -kernel bin/targets/malta/le/openwrt-malta-le-vmlinux-initramfs.elf -nographic -m 256

For the 32 bit big-endian image:
qemu-system-mips -kernel bin/targets/malta/be/openwrt-malta-be-vmlinux-initramfs.elf -nographic -m 256

For the 64 bit little-endian image:
qemu-system-mips64el -kernel bin/targets/malta/le64/openwrt-malta-le64-vmlinux-initramfs.elf -nographic -m 256

For the 64 bit big-endian image:
qemu-system-mips64 -kernel bin/targets/malta/be64/openwrt-malta-be64-vmlinux-initramfs.elf -nographic -m 256

and enjoy the system bootin.