An opensource OpenWrt variant for mainland China users.

Go to file

DENG Qingfang f9b94cbbad ath79: add support for Arris SBC-AC1750 Specifications: - SoC: QCA9558 - Flash: 128M NAND - RAM: 256M - Ethernet: QCA8337, 1 WAN and 4 LANs - 2.4GHz wireless: SoC integrated - 5GHz wireless: QCA9880 - 2 buttons (Reset and WPS) - 4 GPIO-LEDs - USB 2.0 port Flash instructions: (To be done) Note: This router has an external watchdog connected to SoC's GPIO 18. If the watchdog is not fed for about 2 seconds, it will reset the SoC. Unfortunately, the stock U-boot has a bug that it does not feed the watchdog when decompressing kernel. If the kernel is LZMA-compressed, it might take too long before watchdog timeout. So we have to use gzip instead for faster decompressing speed. For initramfs image, compression is not used because it is bigger and will take even more time to decompress. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> Signed-off-by: CN_SZTL <cnsztl@project-openwrt.eu.org>		2021-01-31 13:52:50 +08:00
config	Merge Mainline	2021-01-29 00:10:05 +08:00
include	Merge Mainline	2021-01-29 23:01:13 +08:00
package	[HOTFIX] Merge Mainline	2021-01-31 11:44:46 +08:00
scripts	Merge Mainline	2021-01-29 00:10:05 +08:00
target	ath79: add support for Arris SBC-AC1750	2021-01-31 13:52:50 +08:00
toolchain	Merge Mainline	2021-01-29 00:10:05 +08:00
tools	firmware-utils: bcm4908asus: tool inserting Asus tail into BCM4908 image	2021-01-23 12:11:11 +08:00
.gitattributes	fix permisson	2019-08-16 15:09:42 +08:00
.gitignore	build: improve ccache support	2021-01-02 12:08:17 +08:00
BSDmakefile	packages: apply usign padding workarounds to package indexes if needed	2019-08-16 14:48:02 +08:00
Config.in	packages: apply usign padding workarounds to package indexes if needed	2019-08-16 14:48:02 +08:00
CONTRIBUTED.md	Merge Mainline	2020-12-25 19:25:12 +08:00
feeds.conf.default	feeds: switch to github official repo	2020-06-20 12:06:05 +08:00
LICENSE	packages: apply usign padding workarounds to package indexes if needed	2019-08-16 14:48:02 +08:00
Makefile	build: use ccache -C for cleaning the cache	2021-01-07 09:57:24 +08:00
README.md	README: rename branch to openwrt-18.06-k5.4	2020-08-08 13:53:33 +08:00
rules.mk	rules: fix COMMITCOUNT logic	2021-01-27 12:19:41 +08:00

README.md

PROJECT OPENWRT

The Source Code of OpenWrt-Lean Modified by CTCGFW

Welcome to our Telegram Group: @ctcgfw_openwrt_discuss.

How to make it

Minimum requirements

Linux with case sensitive
2G DDR2 RAM
2 CPU Cores (AMD64, 1.4Ghz)
25G disk space left
Has access to both ChinaNet & Internet

Install the necessary packages (for Ubuntu user)

sudo apt-get update -y
sudo apt-get full-upgrade -y
sudo apt-get install -y build-essential asciidoc binutils bzip2 gawk gettext git libncurses5-dev libz-dev patch unzip zlib1g-dev lib32gcc1 libc6-dev-i386 subversion flex uglifyjs git-core gcc-multilib g++-multilib p7zip p7zip-full msmtp libssl-dev texinfo libreadline-dev libglib2.0-dev xmlto qemu-utils upx libelf-dev autoconf automake libtool autopoint ccache curl wget vim nano python python3 python-pip python3-pip python-ply python3-ply haveged lrzsz device-tree-compiler scons antlr3 gperf intltool rsync

For mainland China & Ubuntu(16.04+) user, you may run the following command to setup quickly:

sudo bash -c "bash <(curl -s https://build-scripts.project-openwrt.eu.org/init_build_environment.sh)"

Clone the source

git clone -b openwrt-18.06-k5.4 --single-branch https://github.com/project-openwrt/openwrt && cd openwrt
./scripts/feeds update -a && ./scripts/feeds install -a

Configure your firmware

make menuconfig

Make it

make -j1 V=s

Tips

You'd better not use root to make it, or you may be not able to use.
Default login address: 192.168.1.1, username is root and password is password.