fish/immortalwrt
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

rockchip: fixes re-boot with UHS cards

Browse Source 
Some boards have SD card connectors where the power rail cannot be switched
off by the driver. If the card has not been power cycled, it may still be
using 1.8V signaling after a warm re-boot. Bootroms expecting 3.3V signaling
will fail to boot from a UHS card that continue to use 1.8V signaling.

Set initial signal voltage in mmc_power_off() to allow re-boot to function.

This fixes re-boot with UHS cards on Asus Tinker Board (Rockchip RK3288),
same issue have been seen on some Rockchip RK3399 boards.

Backport from https://lore.kernel.org/linux-rockchip/AM3PR03MB09664161A7FA2BD68B2800A7AC620@AM3PR03MB0966.eurprd03.prod.outlook.com/

Signed-off-by: Tianling Shen <cnsztl@gmail.com>
This commit is contained in:
Tianling Shen 2020-12-25 21:59:41 +08:00 committed by CN_SZTL
parent 259cf3b7e3
commit b1c482bfc0
No known key found for this signature in database
GPG Key ID: 6850B6345C862176
1 changed files with 41 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

41
target/linux/rockchip/patches-5.4/108-rfc-mmc-core-set-initial-signal-voltage-on-power-off.patch Normal file
View File

@ -0,0 +1,41 @@
Subject: [RFC] mmc: core: set initial signal voltage on power off
Date: Sun, 17 Feb 2019 22:14:38 +0000
Message-ID: <AM3PR03MB09664161A7FA2BD68B2800A7AC620@AM3PR03MB0966.eurprd03.prod.outlook.com>
Some boards have SD card connectors where the power rail cannot be switched
off by the driver. If the card has not been power cycled, it may still be
using 1.8V signaling after a warm re-boot. Bootroms expecting 3.3V signaling
will fail to boot from a UHS card that continue to use 1.8V signaling.
Set initial signal voltage in mmc_power_off() to allow re-boot to function.
This fixes re-boot with UHS cards on Asus Tinker Board (Rockchip RK3288),
same issue have been seen on some Rockchip RK3399 boards.
I am sending this as a RFC because I have no insights into SD/MMC subsystem,
this change fix a re-boot issue on my boards and does not break emmc/sdio.
Is this an acceptable workaround? Any advice is appreciated.
Signed-off-by: Jonas Karlman <jonas-uIzNG4q0ceqzQB+pC5nmwQ@public.gmane.org>
---
drivers/mmc/core/core.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1684,6 +1684,14 @@ void mmc_power_off(struct mmc_host *host)
if (host->ios.power_mode == MMC_POWER_OFF)
return;
+ mmc_set_initial_signal_voltage(host);
+
+ /*
+ * This delay should be sufficient to allow the power supply
+ * to reach the minimum voltage.
+ */
+ mmc_delay(host->ios.power_delay_ms);
+
mmc_pwrseq_power_off(host);
host->ios.clock = 0;