An opensource OpenWrt variant for mainland China users.

Go to file

Tianling Shen b1c482bfc0 rockchip: fixes re-boot with UHS cards Some boards have SD card connectors where the power rail cannot be switched off by the driver. If the card has not been power cycled, it may still be using 1.8V signaling after a warm re-boot. Bootroms expecting 3.3V signaling will fail to boot from a UHS card that continue to use 1.8V signaling. Set initial signal voltage in mmc_power_off() to allow re-boot to function. This fixes re-boot with UHS cards on Asus Tinker Board (Rockchip RK3288), same issue have been seen on some Rockchip RK3399 boards. Backport from https://lore.kernel.org/linux-rockchip/AM3PR03MB09664161A7FA2BD68B2800A7AC620@AM3PR03MB0966.eurprd03.prod.outlook.com/ Signed-off-by: Tianling Shen <cnsztl@gmail.com>		2020-12-28 22:23:09 +08:00
config	Merge Official Source	2020-12-25 19:11:13 +08:00
include	Merge Official Source	2020-12-25 19:11:13 +08:00
package	uboot-rockchip: add NanoPi R4S support	2020-12-27 14:00:31 +08:00
scripts	Merge Official Source	2020-12-25 19:11:13 +08:00
target	rockchip: fixes re-boot with UHS cards	2020-12-28 22:23:09 +08:00
toolchain	toolchain: Fix glibc selection on ARC targets	2020-12-23 00:45:19 +01:00
tools	Merge Official Source	2020-12-25 19:11:13 +08:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	build: improve ccache support	2020-07-11 15:19:53 +02:00
BSDmakefile
Config.in	merge: base: update base-files and basic config	2017-12-08 19:41:18 +01:00
CONTRIBUTED.md	luci-proto-minieap: add package	2020-12-25 19:04:42 +08:00
feeds.conf.default	Merge Official Source	2020-06-27 11:53:26 +08:00
LICENSE	LICENSE: use updated GNU copy	2020-08-02 15:54:43 +02:00
Makefile	build: improve ccache support	2020-07-11 15:19:53 +02:00
README.md	build: require rsync	2020-12-07 18:23:13 +02:00
rules.mk	rules.mk: use -fPIC instead of -fpic on arm64	2020-12-07 18:23:13 +02:00

README.md

PROJECT OPENWRT

The Experimental Source Code of OpenWrt-Snapshot Modified by CTCGFW

Welcome to our Telegram Group: @ctcgfw_openwrt_discuss.

How to make it

Minimum requirements

Linux with case sensitive
2G DDR2 RAM
2 CPU Cores (AMD64, 1.4Ghz)
25G disk space left
Has access to both ChinaNet & Internet

Install the necessary packages (for Ubuntu user)

sudo apt-get update -y
sudo apt-get full-upgrade -y
sudo apt-get install -y build-essential asciidoc binutils bzip2 gawk gettext git libncurses5-dev libz-dev patch unzip zlib1g-dev lib32gcc1 libc6-dev-i386 subversion flex uglifyjs git-core gcc-multilib g++-multilib p7zip p7zip-full msmtp libssl-dev texinfo libreadline-dev libglib2.0-dev xmlto qemu-utils upx libelf-dev autoconf automake libtool autopoint ccache curl wget vim nano python python3 python-pip python3-pip python-ply python3-ply haveged lrzsz device-tree-compiler scons antlr3 gperf intltool mkisofs rsync

For mainland China & Ubuntu(16.04+) user, you may run the following command to setup quickly:

sudo bash -c "bash <(curl -s https://build-scripts.project-openwrt.eu.org/init_build_environment.sh)"

Clone the source

git clone -b master --single-branch https://github.com/project-openwrt/openwrt && cd openwrt
./scripts/feeds update -a && ./scripts/feeds install -a

Configure your firmware

make menuconfig

Make it

make -j1 V=s

Tips

You'd better not use root to make it, or you may be not able to use.
Default login address: 192.168.1.1, username is root and password is password.