Zoltan HERPAI
1da7eabe9a
sunxi: add support for H6 boards and OrangePiOnePlus
...
Specifications:
SoC Allwinner H6 @ 1.8 Ghz
DRAM 1Gb LPDDR3
Power DC 5V @ 3A
Video HDMI (Type 2.0A - full)
Audio HDMI, on-board microphone
Network 10/100/1000Mbps Ethernet (Realtek RTL8211)
Storage microSD
USB 1 USB2.0 Host, 1 USB2.0 OTG
Debug Serial UART
Flashing instructions:
Standard sunxi SD card installation procedure - copy image to SD card,
insert into SD card slot on the device and boot.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2021-04-15 23:20:38 +08:00
Zoltan HERPAI
6ec43e6372
sunxi: enable wifi module on Pine64 boards
...
The Pine64(+) and the SoPine64 baseboard has an optional BT+WiFi
module, carrying an RTL8723BS. The wifi part is connected via
SDIO, the BT part is connected via UART. The BT part requires
additional code changes in the drivers so we'll skip that until 5.10.
Aside from a DTS patch to enable the wifi module, add the required
packages into the device definitions.
[ 8.996970] RTL8723BS: module init start
[ 9.000922] RTL8723BS: rtl8723bs v4.3.5.5_12290.20140916_BTCOEX20140507-4E40
[ 9.007965] RTL8723BS: rtl8723bs BT-Coex version = BTCOEX20140507-4E40
[ 9.014785] pnetdev = 000000009bdd5000
[ 9.047780] RTL8723BS: rtw_ndev_init(wlan0)
[ 9.053349] RTL8723BS: module init ret =0
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2021-03-30 23:13:04 +08:00
AmadeusGhost
b9ae8b7c93
Merge Mainline
2021-03-26 20:28:03 +08:00
Adrian Schmutzler
0cd3943f36
target: use SPDX license identifiers on Makefiles
...
Use SPDX license tags to allow machines to check licenses.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-11 12:05:39 +08:00
AmadeusGhost
eaa1406dd4
sunxi: a53: image: add missing predigestion
...
Fixes: ef1eee2
2021-02-10 16:30:19 +08:00
AmadeusGhost
ef1eee23f6
sunxi: add support for FriendlyARM NanoPi R1S H5
...
(cherry picked from commit 144c82515c3adf449fa9
2021-02-10 12:17:12 +08:00
Roman Kuzmitskii
b9599c8c36
sunxi: add support for Libre Computer ALL-H3-CC H5
...
Specification:
- CPU: Allwinner H5, Quad-core Cortex-A53 Up to 1GHz
- DDR3 RAM: 2GB
- Network:
10/100M Ethernet x 1
- IR: x1 (Receive)
- USB (Host) Type-A x3
- USB (OTG) Type-A x1
- MicroSD Slot x 1
- eMMC Slot x1
- MicroUSB power input
- GPIO 40pin header
- UART 3pin header
- Leds:
- librecomputer:blue:status
- librecomputer:green:pwr
- Buttons:
- uboot button (used to enter fel mode)
- power button (can trigger power on)
- Power Supply via MicroUSB or GPIO 5V/2A
Installation:
- Write the image to SD Card with dd
- Boot from the SD Card
Signed-off-by: Roman Kuzmitskii <damex.pp@icloud.com>
[Fixed Signed-off-by]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-11-14 13:44:07 +08:00
CN_SZTL
a28742101a
sunxi: sync with upstream source
2020-09-06 12:40:53 +08:00
