Define the kernel config symbol CONFIG_MFD_RB4XX_CPLD=n
to fix build breakage on non-mikrotik targets.
The driver was added for all ath79, but the symbol was only
defined for mikrotik subtarget.
Fixes: fa70b3a4bb ("ath79: add Mikrotik rb4xx series drivers")
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
[rearrange commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
CONFIG_HZ_100 is not set to "y" in generic config anymore since
3a761c90af ("treewide: Don't diverge from upstream default HZ
settings on 4.19"), so we don't need to disable it anymore either.
This was the only remaining case in the entire tree.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Currently I'm unable to boot initramfs image with `console=ttyS0,115200`
kernel commandline as the kernel commandline mangling resets kernel
commandline if there is no `root=` option provided, efectively clearing
whatever I pass to the kernel, making the `root=` option mandatory.
So if the kernel commandline mangling is not appropriate just leave the
kernel commandline as it is.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
The Sercomm devices don't need the jffs2 cleanmarkers for the kernel
partition. With the stock firmware they are only added when the
bootloader partition is upgraded.
Furthermore, on the Sercomm H500-s, the specific cfe_jffs2_upgrade_tar
function causes OOB corruption. As a result of this, combined with the
nature of the mtdsplit driver, the upgrade procedure ends in a bricked
device.
Use the generic nand_do_upgrade provided by the OpenWrt common functions.
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
The uci config section network.globals set up in /bin/config_generate
will only be created if /proc/sys/net/ipv6 exists.
Correspondingly, lacking IPv6 support, the command
uci set network.globals.packet_steering=1
will fail with "uci: Invalid argument" as the network.globals config
has not been set up.
Fix that by adding the setup there as well.
While at it, limit the uci commit to the network config file.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This drops the shebang from all target files for /lib and
/etc/uci-defaults folders, as these are sourced and the shebang
is useless.
While at it, fix the executable flag on a few of these files.
This does not touch ar71xx, as this target is just used for
backporting now and applying cosmetic changes would just complicate
things.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
uci-defaults are sourced and non-executable, so they do not require
a shebang.
While at it, apply consistent naming scheme.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This patch adds support for the MikroTik RouterBOARD RB493G, ported
from the ar71xx target.
See https://routerboard.com/RB493G for details
Specification:
- SoC Qualcomm Atheros AR7161
- RAM: 256 MiB
- Storage: 128MiB NAND
- Ethernet: 9x 1000/100/10 Mbps
- USB 1x 2.0 / 1.0 type A
- PCIe: 3x Mini slot
- MicroSD slot
Working:
- Board/system detection
- Ethernet
- SPI
- NAND
- LEDs
- USB
- Sysupgrade
Enabled (but untested due to lack of hardware):
- PCIe - ath79_pci_irq struct has the slot/pin/IRQ mappings if needed
Installation methods:
- tftp boot initramfs image, scp then flash via "sysupgrade -n"
- nand boot existing OpenWrt, scp then flash via "sysupgrade -n"
Notes:
- initramfs image will not work if uncompressed image size over ~8.5Mb
- The "rb4xx" drivers have been enabled
Signed-off-by: Christopher Hill <ch6574@gmail.com>
This adds 3 Mikrotik rb4xx series drivers as follows:
rb4xx-cpld: This is in the mfd subsystem, and is the parent CPLD device
that interfaces between the SoC SPI bus and its two children below.
rb4xx-gpio: This is the GPIO expander.
rb4xx-nand: This is the NAND driver.
The history of this code comes in three phases.
1. The first is a May 2015 attempt to push the equivalient ar71xx rb4xx
drivers upstream. See https://lore.kernel.org/patchwork/patch/940880/.
Module-author: Gabor Juhos <juhosg@openwrt.org>
Module-author: Imre Kaloz <kaloz@openwrt.org>
Module-author: Bert Vermeulen <bert@biot.com>
2. Next several ar71xx patches were applied bringing the code current.
commit 7bbf4117c6
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
commit af79fdbe4a
commit 889272d92d
commit e21cb649a2
commit 7c09fa4a74
Signed-off-by: Felix Fietkau <nbd@nbd.name>
3. Finally a heavy refactor to split the driver into the three new
subsystems, and updated to work with the device tree configuration, plus
updates and review feedback incorporated
Reviewed-by: Thibaut VARÈNE <hacks@slashdirt.org>
Signed-off-by: Christopher Hill <ch6574@gmail.com>
Backport upstream patches that make drivers/spi/spi-rb4xx.c device tree
aware, plus a null pointer fix.
Signed-off-by: Christopher Hill <ch6574@gmail.com>
The Pirelli A226M-FWB has a wrong linux partition offset, caused
by a copy-paste error. As of result of this, OpenWrt is currently
broken in this unit.
Fix it.
While at it, also use generic node names and fix the addresses
there as well.
Fixes: a27d59bb42 ("brcm63xx: switch to new partition layout
specification")
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
[also fix/update node names, extend commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Currently, ag71xx will trigger a warning when TX xor RX-Delay modes are
enabled.
Handle them identical to the already implemented RGMII modes, as they
are only different for the attached PHY.
Signed-off-by: David Bauer <mail@david-bauer.net>
The uci config section network.globals set up in /bin/config_generate
will only be created if /proc/sys/net/ipv6 exists.
Correspondingly, lacking IPv6 support, the command
uci set network.globals.packet_steering=1
will fail with "uci: Invalid argument" as the network.globals config
has not been set up.
Fix that by adding the setup there as well.
Fixes: dfd62e575c ("ramips: enable packet steering by default on mt7621")
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
The ZyXEL NBG6617 has a separate kernel partition which is 4MiB large.
Add the kernel size to validate the kernel won't be bigger than this
fixed limit.
Signed-off-by: David Bauer <mail@david-bauer.net>
It was noticed that the the whole MAC can hang when transferring data from
one ar40xx port (WAN ports) to the CPU and from the CPU back to another
ar40xx port (LAN ports). The CPU was doing only NATing in that process.
Usually, the problem first starts with a simple data corruption:
$ wget https://cdimage.debian.org/debian-cd/current/amd64/iso-cd/debian-10.4.0-amd64-netinst.iso -O /dev/null
...
Connecting to saimei.ftp.acc.umu.se (saimei.ftp.acc.umu.se)|2001:6b0:19::138|:443... connected.
...
Read error at byte 48807936/352321536 (Decryption has failed.). Retrying.
But after a short while, the whole MAC will stop to react. No traffic can
be transported anymore from the CPU port from/to the AR40xx PHY/switch and
the MAC has to be resetted.
The whole problem can be avoided by disabling IPv6 TSO for this ethernet
MAC driver.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Changelog
v1.52.1 - 2020-06-10
[See commits](https://github.com/rclone/rclone/compare/v1.52.0...v1.52.1)
* Bug Fixes
* lib/file: Fix SetSparse on Windows 7 which fixes downloads of files > 250MB (Nick Craig-Wood)
* build
* Update go.mod to go1.14 to enable -mod=vendor build (Nick Craig-Wood)
* Remove quicktest from Dockerfile (Nick Craig-Wood)
* Build Docker images with GitHub actions (Matteo Pietro Dazzi)
* Update Docker build workflows (Nick Craig-Wood)
* Set user_allow_other in /etc/fuse.conf in the Docker image (Nick Craig-Wood)
* Fix xgo build after go1.14 go.mod update (Nick Craig-Wood)
* docs
* Add link to source and modified time to footer of every page (Nick Craig-Wood)
* Remove manually set dates and use git dates instead (Nick Craig-Wood)
* Minor tense, punctuation, brevity and positivity changes for the home page (edwardxml)
* Remove leading slash in page reference in footer when present (Nick Craig-Wood)
* Note commands which need obscured input in the docs (Nick Craig-Wood)
* obscure: Write more help as we are referencing it elsewhere (Nick Craig-Wood)
* VFS
* Fix OS vs Unix path confusion - fixes ChangeNotify on Windows (Nick Craig-Wood)
* Drive
* Fix missing items when listing using --fast-list / ListR (Nick Craig-Wood)
* Putio
* Fix panic on Object.Open (Cenk Alti)
* S3
* Fix upload of single files into buckets without create permission (Nick Craig-Wood)
* Fix --header-upload (Nick Craig-Wood)
* Tardigrade
* Fix listing bug by upgrading to v1.0.7
* Set UserAgent to rclone (Caleb Case)
v1.52.0 - 2020-05-27
Special thanks to Martin Michlmayr for proof reading and correcting
all the docs and Edward Barker for helping re-write the front page.
[See commits](https://github.com/rclone/rclone/compare/v1.51.0...v1.52.0)
* New backends
* [Tardigrade](/tardigrade/) backend for use with storj.io (Caleb Case)
* [Union](/union/) re-write to have multiple writable remotes (Max Sum)
* [Seafile](/seafile) for Seafile server (Fred @creativeprojects)
* New commands
* backend: command for backend specific commands (see backends) (Nick Craig-Wood)
* cachestats: Deprecate in favour of `rclone backend stats cache:` (Nick Craig-Wood)
* dbhashsum: Deprecate in favour of `rclone hashsum DropboxHash` (Nick Craig-Wood)
* New Features
* Add `--header-download` and `--header-upload` flags for setting HTTP headers when uploading/downloading (Tim Gallant)
* Add `--header` flag to add HTTP headers to every HTTP transaction (Nick Craig-Wood)
* Add `--check-first` to do all checking before starting transfers (Nick Craig-Wood)
* Add `--track-renames-strategy` for configurable matching criteria for `--track-renames` (Bernd Schoolmann)
* Add `--cutoff-mode` hard,soft,catious (Shing Kit Chan & Franklyn Tackitt)
* Filter flags (eg `--files-from -`) can read from stdin (fishbullet)
* Add `--error-on-no-transfer` option (Jon Fautley)
* Implement `--order-by xxx,mixed` for copying some small and some big files (Nick Craig-Wood)
* Allow `--max-backlog` to be negative meaning as large as possible (Nick Craig-Wood)
* Added `--no-unicode-normalization` flag to allow Unicode filenames to remain unique (Ben Zenker)
* Allow `--min-age`/`--max-age` to take a date as well as a duration (Nick Craig-Wood)
* Add rename statistics for file and directory renames (Nick Craig-Wood)
* Add statistics output to JSON log (reddi)
* Make stats be printed on non-zero exit code (Nick Craig-Wood)
* When running `--password-command` allow use of stdin (Sébastien Gross)
* Stop empty strings being a valid remote path (Nick Craig-Wood)
* accounting: support WriterTo for less memory copying (Nick Craig-Wood)
* build
* Update to use go1.14 for the build (Nick Craig-Wood)
* Add `-trimpath` to release build for reproduceable builds (Nick Craig-Wood)
* Remove GOOS and GOARCH from Dockerfile (Brandon Philips)
* config
* Fsync the config file after writing to save more reliably (Nick Craig-Wood)
* Add `--obscure` and `--no-obscure` flags to `config create`/`update` (Nick Craig-Wood)
* Make `config show` take `remote:` as well as `remote` (Nick Craig-Wood)
* copyurl: Add `--no-clobber` flag (Denis)
* delete: Added `--rmdirs` flag to delete directories as well (Kush)
* filter: Added `--files-from-raw` flag (Ankur Gupta)
* genautocomplete: Add support for fish shell (Matan Rosenberg)
* log: Add support for syslog LOCAL facilities (Patryk Jakuszew)
* lsjson: Add `--hash-type` parameter and use it in lsf to speed up hashing (Nick Craig-Wood)
* rc
* Add `-o`/`--opt` and `-a`/`--arg` for more structured input (Nick Craig-Wood)
* Implement `backend/command` for running backend specific commands remotely (Nick Craig-Wood)
* Add `mount/mount` command for starting `rclone mount` via the API (Chaitanya)
* rcd: Add Prometheus metrics support (Gary Kim)
* serve http
* Added a `--template` flag for user defined markup (calistri)
* Add Last-Modified headers to files and directories (Nick Craig-Wood)
* serve sftp: Add support for multiple host keys by repeating `--key` flag (Maxime Suret)
* touch: Add `--localtime` flag to make `--timestamp` localtime not UTC (Nick Craig-Wood)
* Bug Fixes
* accounting
* Restore "Max number of stats groups reached" log line (Michał Matczuk)
* Correct exitcode on Transfer Limit Exceeded flag. (Anuar Serdaliyev)
* Reset bytes read during copy retry (Ankur Gupta)
* Fix race clearing stats (Nick Craig-Wood)
* copy: Only create empty directories when they don't exist on the remote (Ishuah Kariuki)
* dedupe: Stop dedupe deleting files with identical IDs (Nick Craig-Wood)
* oauth
* Use custom http client so that `--no-check-certificate` is honored by oauth token fetch (Mark Spieth)
* Replace deprecated oauth2.NoContext (Lars Lehtonen)
* operations
* Fix setting the timestamp on Windows for multithread copy (Nick Craig-Wood)
* Make rcat obey `--ignore-checksum` (Nick Craig-Wood)
* Make `--max-transfer` more accurate (Nick Craig-Wood)
* rc
* Fix dropped error (Lars Lehtonen)
* Fix misplaced http server config (Xiaoxing Ye)
* Disable duplicate log (ElonH)
* serve dlna
* Cds: don't specify childCount at all when unknown (Dan Walters)
* Cds: use modification time as date in dlna metadata (Dan Walters)
* serve restic: Fix tests after restic project removed vendoring (Nick Craig-Wood)
* sync
* Fix incorrect "nothing to transfer" message using `--delete-before` (Nick Craig-Wood)
* Only create empty directories when they don't exist on the remote (Ishuah Kariuki)
* Mount
* Add `--async-read` flag to disable asynchronous reads (Nick Craig-Wood)
* Ignore `--allow-root` flag with a warning as it has been removed upstream (Nick Craig-Wood)
* Warn if `--allow-non-empty` used on Windows and clarify docs (Nick Craig-Wood)
* Constrain to go1.13 or above otherwise bazil.org/fuse fails to compile (Nick Craig-Wood)
* Fix fail because of too long volume name (evileye)
* Report 1PB free for unknown disk sizes (Nick Craig-Wood)
* Map more rclone errors into file systems errors (Nick Craig-Wood)
* Fix disappearing cwd problem (Nick Craig-Wood)
* Use ReaddirPlus on Windows to improve directory listing performance (Nick Craig-Wood)
* Send a hint as to whether the filesystem is case insensitive or not (Nick Craig-Wood)
* Add rc command `mount/types` (Nick Craig-Wood)
* Change maximum leaf name length to 1024 bytes (Nick Craig-Wood)
* VFS
* Add `--vfs-read-wait` and `--vfs-write-wait` flags to control time waiting for a sequential read/write (Nick Craig-Wood)
* Change default `--vfs-read-wait` to 20ms (it was 5ms and not configurable) (Nick Craig-Wood)
* Make `df` output more consistent on a rclone mount. (Yves G)
* Report 1PB free for unknown disk sizes (Nick Craig-Wood)
* Fix race condition caused by unlocked reading of Dir.path (Nick Craig-Wood)
* Make File lock and Dir lock not overlap to avoid deadlock (Nick Craig-Wood)
* Implement lock ordering between File and Dir to eliminate deadlocks (Nick Craig-Wood)
* Factor the vfs cache into its own package (Nick Craig-Wood)
* Pin the Fs in use in the Fs cache (Nick Craig-Wood)
* Add SetSys() methods to Node to allow caching stuff on a node (Nick Craig-Wood)
* Ignore file not found errors from Hash in Read.Release (Nick Craig-Wood)
* Fix hang in read wait code (Nick Craig-Wood)
* Local
* Speed up multi thread downloads by using sparse files on Windows (Nick Craig-Wood)
* Implement `--local-no-sparse` flag for disabling sparse files (Nick Craig-Wood)
* Implement `rclone backend noop` for testing purposes (Nick Craig-Wood)
* Fix "file not found" errors on post transfer Hash calculation (Nick Craig-Wood)
* Cache
* Implement `rclone backend stats` command (Nick Craig-Wood)
* Fix Server Side Copy with Temp Upload (Brandon McNama)
* Remove Unused Functions (Lars Lehtonen)
* Disable race tests until bbolt is fixed (Nick Craig-Wood)
* Move methods used for testing into test file (greatroar)
* Add Pin and Unpin and canonicalised lookup (Nick Craig-Wood)
* Use proper import path go.etcd.io/bbolt (Robert-André Mauchin)
* Crypt
* Calculate hashes for uploads from local disk (Nick Craig-Wood)
* This allows crypted Jottacloud uploads without using local disk
* This means crypted s3/b2 uploads will now have hashes
* Added `rclone backend decode`/`encode` commands to replicate functionality of `cryptdecode` (Anagh Kumar Baranwal)
* Get rid of the unused Cipher interface as it obfuscated the code (Nick Craig-Wood)
* Azure Blob
* Implement streaming of unknown sized files so `rcat` is now supported (Nick Craig-Wood)
* Implement memory pooling to control memory use (Nick Craig-Wood)
* Add `--azureblob-disable-checksum` flag (Nick Craig-Wood)
* Retry `InvalidBlobOrBlock` error as it may indicate block concurrency problems (Nick Craig-Wood)
* Remove unused `Object.parseTimeString()` (Lars Lehtonen)
* Fix permission error on SAS URL limited to container (Nick Craig-Wood)
* B2
* Add support for `--header-upload` and `--header-download` (Tim Gallant)
* Ignore directory markers at the root also (Nick Craig-Wood)
* Force the case of the SHA1 to lowercase (Nick Craig-Wood)
* Remove unused `largeUpload.clearUploadURL()` (Lars Lehtonen)
* Box
* Add support for `--header-upload` and `--header-download` (Tim Gallant)
* Implement About to read size used (Nick Craig-Wood)
* Add token renew function for jwt auth (David Bramwell)
* Added support for interchangeable root folder for Box backend (Sunil Patra)
* Remove unnecessary iat from jws claims (David)
* Drive
* Follow shortcuts by default, skip with `--drive-skip-shortcuts` (Nick Craig-Wood)
* Implement `rclone backend shortcut` command for creating shortcuts (Nick Craig-Wood)
* Added `rclone backend` command to change `service_account_file` and `chunk_size` (Anagh Kumar Baranwal)
* Fix missing files when using `--fast-list` and `--drive-shared-with-me` (Nick Craig-Wood)
* Fix duplicate items when using `--drive-shared-with-me` (Nick Craig-Wood)
* Extend `--drive-stop-on-upload-limit` to respond to `teamDriveFileLimitExceeded`. (harry)
* Don't delete files with multiple parents to avoid data loss (Nick Craig-Wood)
* Server side copy docs use default description if empty (Nick Craig-Wood)
* Dropbox
* Make error insufficient space to be fatal (harry)
* Add info about required redirect url (Elan Ruusamäe)
* Fichier
* Add support for `--header-upload` and `--header-download` (Tim Gallant)
* Implement custom pacer to deal with the new rate limiting (buengese)
* FTP
* Fix lockup when using concurrency limit on failed connections (Nick Craig-Wood)
* Fix lockup on failed upload when using concurrency limit (Nick Craig-Wood)
* Fix lockup on Close failures when using concurrency limit (Nick Craig-Wood)
* Work around pureftp sending spurious 150 messages (Nick Craig-Wood)
* Google Cloud Storage
* Add support for `--header-upload` and `--header-download` (Nick Craig-Wood)
* Add `ARCHIVE` storage class to help (Adam Stroud)
* Ignore directory markers at the root (Nick Craig-Wood)
* Googlephotos
* Make the start year configurable (Daven)
* Add support for `--header-upload` and `--header-download` (Tim Gallant)
* Create feature/favorites directory (Brandon Philips)
* Fix "concurrent map write" error (Nick Craig-Wood)
* Don't put an image in error message (Nick Craig-Wood)
* HTTP
* Improved directory listing with new template from Caddy project (calisro)
* Jottacloud
* Implement `--jottacloud-trashed-only` (buengese)
* Add support for `--header-upload` and `--header-download` (Tim Gallant)
* Use `RawURLEncoding` when decoding base64 encoded login token (buengese)
* Implement cleanup (buengese)
* Update docs regarding cleanup, removed remains from old auth, and added warning about special mountpoints. (albertony)
* Mailru
* Describe 2FA requirements (valery1707)
* Onedrive
* Implement `--onedrive-server-side-across-configs` (Nick Craig-Wood)
* Add support for `--header-upload` and `--header-download` (Tim Gallant)
* Fix occasional 416 errors on multipart uploads (Nick Craig-Wood)
* Added maximum chunk size limit warning in the docs (Harry)
* Fix missing drive on config (Nick Craig-Wood)
* Make error `quotaLimitReached` to be fatal (harry)
* Opendrive
* Add support for `--header-upload` and `--header-download` (Tim Gallant)
* Pcloud
* Added support for interchangeable root folder for pCloud backend (Sunil Patra)
* Add support for `--header-upload` and `--header-download` (Tim Gallant)
* Fix initial config "Auth state doesn't match" message (Nick Craig-Wood)
* Premiumizeme
* Add support for `--header-upload` and `--header-download` (Tim Gallant)
* Prune unused functions (Lars Lehtonen)
* Putio
* Add support for `--header-upload` and `--header-download` (Nick Craig-Wood)
* Make downloading files use the rclone http Client (Nick Craig-Wood)
* Fix parsing of remotes with leading and trailing / (Nick Craig-Wood)
* Qingstor
* Make `rclone cleanup` remove pending multipart uploads older than 24h (Nick Craig-Wood)
* Try harder to cancel failed multipart uploads (Nick Craig-Wood)
* Prune `multiUploader.list()` (Lars Lehtonen)
* Lint fix (Lars Lehtonen)
* S3
* Add support for `--header-upload` and `--header-download` (Tim Gallant)
* Use memory pool for buffer allocations (Maciej Zimnoch)
* Add SSE-C support for AWS, Ceph, and MinIO (Jack Anderson)
* Fail fast multipart upload (Michał Matczuk)
* Report errors on bucket creation (mkdir) correctly (Nick Craig-Wood)
* Specify that Minio supports URL encoding in listings (Nick Craig-Wood)
* Added 500 as retryErrorCode (Michał Matczuk)
* Use `--low-level-retries` as the number of SDK retries (Aleksandar Janković)
* Fix multipart abort context (Aleksandar Jankovic)
* Replace deprecated `session.New()` with `session.NewSession()` (Lars Lehtonen)
* Use the provided size parameter when allocating a new memory pool (Joachim Brandon LeBlanc)
* Use rclone's low level retries instead of AWS SDK to fix listing retries (Nick Craig-Wood)
* Ignore directory markers at the root also (Nick Craig-Wood)
* Use single memory pool (Michał Matczuk)
* Do not resize buf on put to memBuf (Michał Matczuk)
* Improve docs for `--s3-disable-checksum` (Nick Craig-Wood)
* Don't leak memory or tokens in edge cases for multipart upload (Nick Craig-Wood)
* Seafile
* Implement 2FA (Fred)
* SFTP
* Added `--sftp-pem-key` to support inline key files (calisro)
* Fix post transfer copies failing with 0 size when using `set_modtime=false` (Nick Craig-Wood)
* Sharefile
* Add support for `--header-upload` and `--header-download` (Tim Gallant)
* Sugarsync
* Add support for `--header-upload` and `--header-download` (Tim Gallant)
* Swift
* Add support for `--header-upload` and `--header-download` (Nick Craig-Wood)
* Fix cosmetic issue in error message (Martin Michlmayr)
* Union
* Implement multiple writable remotes (Max Sum)
* Fix server-side copy (Max Sum)
* Implement ListR (Max Sum)
* Enable ListR when upstreams contain local (Max Sum)
* WebDAV
* Add support for `--header-upload` and `--header-download` (Tim Gallant)
* Fix `X-OC-Mtime` header for Transip compatibility (Nick Craig-Wood)
* Report full and consistent usage with `about` (Yves G)
* Yandex
* Add support for `--header-upload` and `--header-download` (Tim Gallant)
* RcloneNg: bump version to 0.3.1
Changelog
[0.3.1](https://github.com/ElonH/RcloneNg/compare/v0.3.0...v0.3.1) (2020-06-13)
Features
* **about:** show changelog ([9d7bea5](9d7bea5f62))
* **breadcurmb:** edit mode, double click to edit path. double again, back to normal ([60c57b4](60c57b4368))
* **file.detail:** enable download file ([1f578f7](1f578f7d54))
* **file.detail:** show spaces usage in file detail if selected is directory ([ff27df9](ff27df9161))
* **list-view:** expend click area of checkbox to improving user experience ([988a219](988a219dbb))
* **manager:** push a message to toastr before creating directory ([9e1091a](9e1091a1f1))
* **pages:** add star button ([5c23b9b](5c23b9bfe3))
* **server-setting:** adding more description in schema ([4eee2f5](4eee2f55d9))
* **server-setting:** provide a powerful schema for server setting ([67223bf](67223bf7e4))
Bug Fixes
* check if "rc.Serve" is enabled in server options before downloading file ([6a484ca](6a484ca3a7))
* remove debug code ([b5cb23c](b5cb23c9db))
* **breadcurmb:** set cursor as poniter in breadcurmb item ([f014edc](f014edc11e))
* **changelog.md:** copy RcloneNg CHANGELOG.md only ([ef76e1e](ef76e1e589))
* **list-view:** disable double click in manipulations column ([0e0d825](0e0d825f57))
* **list-view:** disable double click surrounding area of checkbox ([bf03dd1](bf03dd173f))
* **list-view:** disable select types icon ([2ea540e](2ea540ec15))
* **manager:** show detail button when right sidebar is expended ([d69179e](d69179e36e))
* RcloneNg: bump version to 0.3.2
Changelog
[0.3.2](https://github.com/ElonH/RcloneNg/compare/v0.3.1...v0.3.2) (2020-06-14)
Features
* **jobs-manager:** add animation on refresh button ([b7cc817](b7cc817b23))
Bug Fixes
* **list-view:** table index except first page ([b9d7fcf](b9d7fcfb1c))
To prevent "wrong" musl packages which have a new version number
but the package still contains an old version, because
PKG_SOURCE_VERSION was unchanged.
Ref: musl ml https://www.openwall.com/lists/musl/2020/05/22/4
Reviewed-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
ipq40xx is still using swconfig based switch management. This might
change in he future, however disable the DSA and Switchdev support for
now.
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
[rephrased commit message]
Signed-off-by: David Bauer <mail@david-bauer.net>
The NETGEAR EX61500v2 and EX6150v2 U-Boot does not support booting LZMA
compressed images. Currently, they are using GZIP compressed kernels,
which results in ledd flash being available to the root and overlay
filesystems.
Using a zImage results in a smaller kernel and therefore increases
available space for rootfs and overlayfs.
Size reduced: ~1.1 MiB
Signed-off-by: David Bauer <mail@david-bauer.net>
ipq40xx is still using swconfig based switch management. This might
change in he future, however disable the DSA and Switchdev support for
now.
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
[rephrased commit message]
Signed-off-by: David Bauer <mail@david-bauer.net>
It was noticed that the the whole MAC can hang when transferring data from
one ar40xx port (WAN ports) to the CPU and from the CPU back to another
ar40xx port (LAN ports). The CPU was doing only NATing in that process.
Usually, the problem first starts with a simple data corruption:
$ wget https://cdimage.debian.org/debian-cd/current/amd64/iso-cd/debian-10.4.0-amd64-netinst.iso -O /dev/null
...
Connecting to saimei.ftp.acc.umu.se (saimei.ftp.acc.umu.se)|2001:6b0:19::138|:443... connected.
...
Read error at byte 48807936/352321536 (Decryption has failed.). Retrying.
But after a short while, the whole MAC will stop to react. No traffic can
be transported anymore from the CPU port from/to the AR40xx PHY/switch and
the MAC has to be resetted.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: John Crispin <john@phrozen.org>
With the new driver, MAC addresses are not set up in DTS anymore,
and therefore label-mac-device will be useless there.
Setup is done properly in 02_network, so this just removes the
obsolete alias.
Fixes: 5e50515fa6 ("ramips/mt7621: mikrotik: don't use
mtd-mac-address in DTS")
Suggested-by: John Thomson <git@johnthomson.fastmail.com.au>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
With several subtargets, the image/Makefile becomes crowded after a
while. Many targets have moved their device definitions to $subtarget.mk
files to have them more organized, let's do this here as well.
Cc: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
IPKG_INSTROOT is only set under image builder and we won't be running
this script at build time either, so remove the reference before it gets
cargo-culted into other scripts.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Acked-by: Hans Dedecker <dedeckeh@gmail.com>
The folder `json_info_files` contains multiple JSON files which describe
created firmware images. The folder is not removed between builds as the
ImageBuilder does not use `image.mk`.
Not removing the JSON files result in a merged `profiles.json` file
containing entries for outdated or non-existing images.
This commit adds the `json_info_files/` cleanup step to the ImageBuilder
Makefile.
Signed-off-by: Paul Spooren <mail@aparcar.org>
The patch 4a1a58a3 build, imagebuilder: Do not require libncurses-dev
was supposed to remove libncurses as a requirement for the ImageBuilder.
However as the IB=1 is only exported during building, not for checking
requirements, it did never actually work.
This commit export IB=1 to the requirement check.
Signed-off-by: Paul Spooren <mail@aparcar.org>
