immortalwrt/target/linux/ramips/image
Marc Egerton 26abb8edea
ramips: add support for the Hak5 WiFi Pineapple Mark 7
This patch adds support for the WiFi Pineapple Mark 7, a wireless
penetration testing tool.

Specifications:
    * SoC: MediaTek MT7628 (580MHz)
    * RAM: 256MiB (DDR2)
    * Storage 1: 32MiB NOR (SPI)
    * Storage 2: 2GB eMMC
    * Wireless 1: 802.11b/g/n 2.4GHz (Built In)
    * Wireless 2: 802.11b/g/n 2.4GHz (MT7601)
    * Wireless 3: 802.11b/g/n 2.4GHz (MT7601)
    * USB: 1x USB Type-A 2.0 Host Port
    * Ethernet: 1x USB Type-C AX88772C Ethernet
    * UART: 57600 8N1 on PCB
    * Inputs: 1x Reset Button
    * Outputs: 1x RGB LED
    * FCCID: 2AA52MK7

Flash Instructions:
    Original firmware is based on OpenWRT.
    Use sysupgrade via SSH to flash.

Signed-off-by: Marc Egerton <foxtrot@realloc.me>
[pepe2k@gmail.com: set only required/used gpio groups to gpio function]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2020-11-21 18:00:13 +08:00
..
lzma-loader ramips: sync official source code 2020-09-12 15:01:12 +08:00
common-tp-link.mk treewide: omit IMAGE_SIZE argument from check-size 2020-07-30 23:44:37 +08:00
Makefile build: image: move IMAGE_SIZE to image.mk 2020-09-21 20:00:35 +08:00
mt76x8.mk ramips: add support for the Hak5 WiFi Pineapple Mark 7 2020-11-21 18:00:13 +08:00
mt7620.mk ramips: add support for TP-Link Archer C5 v4 2020-09-19 19:27:59 +08:00
mt7621.mk Revert "ramips: add support for D-Link DIR-2640 A1" 2020-11-15 18:12:29 +08:00
rt288x.mk ramips: sync official source code 2020-09-12 15:01:12 +08:00
rt305x.mk ramips: sync official source code 2020-09-12 15:01:12 +08:00
rt3883.mk ramips: sync official source code 2020-09-12 15:01:12 +08:00