Roman Kuzmitskii b9599c8c36 sunxi: add support for Libre Computer ALL-H3-CC H5 ... Specification: - CPU: Allwinner H5, Quad-core Cortex-A53 Up to 1GHz - DDR3 RAM: 2GB - Network: 10/100M Ethernet x 1 - IR: x1 (Receive) - USB (Host) Type-A x3 - USB (OTG) Type-A x1 - MicroSD Slot x 1 - eMMC Slot x1 - MicroUSB power input - GPIO 40pin header - UART 3pin header - Leds: - librecomputer:blue:status - librecomputer:green:pwr - Buttons: - uboot button (used to enter fel mode) - power button (can trigger power on) - Power Supply via MicroUSB or GPIO 5V/2A Installation: - Write the image to SD Card with dd - Boot from the SD Card Signed-off-by: Roman Kuzmitskii <damex.pp@icloud.com> [Fixed Signed-off-by] Signed-off-by: Petr Štetiar <ynezz@true.cz>		2020-11-14 13:44:07 +08:00
..
base-files	sunxi: fix board.d/01_leds permissions and drop include	2020-11-14 13:26:12 +08:00
cortexa7	treewide: remove support for kernel 4.x	2020-10-31 11:39:45 +08:00
cortexa8	treewide: remove support for kernel 4.x	2020-10-31 11:39:45 +08:00
cortexa53	treewide: remove support for kernel 4.x	2020-10-31 11:39:45 +08:00
image	sunxi: add support for Libre Computer ALL-H3-CC H5	2020-11-14 13:44:07 +08:00
patches-5.4	sunxi: fix NanoPi R1 support	2020-10-22 13:02:23 +08:00
profiles	sunxi: sync with upstream source	2020-09-06 12:40:53 +08:00
config-5.4	treewide: enable the vDSO	2020-10-14 20:08:22 +08:00
Makefile	sunxi: sync with upstream source	2020-09-06 12:40:53 +08:00
modules.mk	sunxi: add a kmod package for sun4i_spdif	2020-10-12 11:41:24 +08:00