immortalwrt/target/linux/ramips/mt7620
Deng Qingfang 7a74dab129
ramips: add support for TP-Link Archer C5 v4
TP-Link Archer C5 v4 is a dual band router with 5 GbE ports
Advertised as AC1200 for its 867Mbps (2×2) 5GHz band
and 300 Mbps (2×2) 2.4GHz band.

Specs:
- SoC: MediaTek MT7620A
- Ethernet: 5 GbE ports (Realtek RTL8367S)
- Wireless 2.4GHz: MediaTek MT7620A
- Wireless 5GHz: MediaTek MT7612E
- RAM: 64MiB
- ROM: 8MiB (GD25Q64CSIG)
- 1 USB 2.0 port
- 2 Buttons (WPS and reset)
- 8 LEDs

Flash instructions:
Currently one has to install OpenWrt only via the serial console

1. Rename the factory.bin to to test.bin
2. start a TFTP server from IP address 192.168.0.225 and serve the image named test.bin
3. connect your device to the LAN port
4. power up the router and press 4 on the console to stop the boot process.
5. enter the following commands on the router console
	tftp 0x80060000 test.bin
	erase tplink 0x20000 0x7a0000
	cp.b 0x80060000 0x20000 0x7a0000
	reset

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-09-19 19:27:59 +08:00
..
base-files ramips: add support for TP-Link Archer C5 v4 2020-09-19 19:27:59 +08:00
profiles ramips: mt7621: add support for Netgear R6800 2019-12-13 08:25:54 -08:00
config-4.14 kernel: unify CONFIG_GPIO_SYSFS in kernel configs 2020-08-07 18:08:33 +08:00
config-5.4 ramips: add mt7620-nand driver for NAND flash 2020-09-12 11:58:02 +08:00
target.mk ramips: switch rt305x subtarget to kernel 5.4 2020-08-07 18:03:27 +08:00