An opensource OpenWrt variant for mainland China users.

Go to file

David Bauer f518d014c7 ath79: add support for Ubiquiti UniFi AP Pro This adds support for the Ubiquiti UniFi AP Pro to the ath79 target. The device was previously supported on the now removed ar71xx target. SoC Atheros AR9344 WiFi Atheros AR9344 & Atheros AR9280 ETH Atheros AR8327 RAM 128M DDR2 FLASH 16M SPI-NOR Installation ------------ Follow the Ubiquiti TFTP recovery procedure for this device. 1. Hold down the reset button while connecting power for 10 seconds. 2. Transfer the factory image via TFTP to the AP (192.168.1.20) 3. Wait 2 minutes for the AP to write the firmware to flash. The device will automatically reboot to OpenWrt. Signed-off-by: David Bauer <mail@david-bauer.net>		2020-09-19 18:44:27 +08:00
config	ar71xx: drop target	2020-09-06 18:19:14 +08:00
include	Merge Mainline	2020-09-16 13:42:04 +08:00
package	arm-trusted-firmware-mvebu: add support for espressobin	2020-09-19 11:40:58 +08:00
scripts	Merge Mainline	2020-09-16 13:42:04 +08:00
target	ath79: add support for Ubiquiti UniFi AP Pro	2020-09-19 18:44:27 +08:00
toolchain	toolchain: Update GCC 10 to version 10.2.0	2020-09-01 17:37:46 +08:00
tools	ath79: support for TP-Link EAP225-Wall v2	2020-09-19 18:35:32 +08:00
.gitattributes	fix permisson	2019-08-16 15:09:42 +08:00
.gitignore	gitignore: ignore patches in root directory	2020-02-25 15:39:25 +08:00
BSDmakefile	packages: apply usign padding workarounds to package indexes if needed	2019-08-16 14:48:02 +08:00
Config.in	packages: apply usign padding workarounds to package indexes if needed	2019-08-16 14:48:02 +08:00
CONTRIBUTED.md	Merge Mainline	2020-08-28 01:59:52 +08:00
feeds.conf.default	feeds: switch to github official repo	2020-06-20 12:06:05 +08:00
LICENSE	packages: apply usign padding workarounds to package indexes if needed	2019-08-16 14:48:02 +08:00
Makefile	Makefile: sync with official source	2020-07-30 23:49:33 +08:00
README.md	README: rename branch to openwrt-18.06-k5.4	2020-08-08 13:53:33 +08:00
rules.mk	build: fix path to libfakeroot on macOS	2020-09-02 11:31:25 +08:00

README.md

PROJECT OPENWRT

The Source Code of OpenWrt-Lean Modified by CTCGFW

Welcome to our Telegram Group: @ctcgfw_openwrt_discuss.

How to make it

Minimum requirements

Linux with case sensitive
2G DDR2 RAM
2 CPU Cores (AMD64, 1.4Ghz)
25G disk space left
Has access to both ChinaNet & Internet

Install the necessary packages (for Ubuntu user)

sudo apt-get update -y
sudo apt-get full-upgrade -y
sudo apt-get install -y build-essential asciidoc binutils bzip2 gawk gettext git libncurses5-dev libz-dev patch unzip zlib1g-dev lib32gcc1 libc6-dev-i386 subversion flex uglifyjs git-core gcc-multilib g++-multilib p7zip p7zip-full msmtp libssl-dev texinfo libreadline-dev libglib2.0-dev xmlto qemu-utils upx libelf-dev autoconf automake libtool autopoint ccache curl wget vim nano python python3 python-pip python3-pip python-ply python3-ply haveged lrzsz device-tree-compiler scons antlr3 gperf intltool rsync

For mainland China & Ubuntu(16.04+) user, you may run the following command to setup quickly:

sudo bash -c "bash <(curl -s https://build-scripts.project-openwrt.eu.org/init_build_environment.sh)"

Clone the source

git clone -b openwrt-18.06-k5.4 --single-branch https://github.com/project-openwrt/openwrt && cd openwrt
./scripts/feeds update -a && ./scripts/feeds install -a

Configure your firmware

make menuconfig

Make it

make -j1 V=s

Tips

You'd better not use root to make it, or you may be not able to use.
Default login address: 192.168.1.1, username is root and password is password.